Variable Speed Vortex Mixer, up to 2700 rpm
- Variable speed vortex mixer for single tube mixing workflows
- Suitable for most test tubes up to 28 mm diameter
- Speed control range listed from 200 to 2700 rpm
- Manual mode activates when downward pressure is applied to the tube
- Automatic mode supports continuous operation
- Variable speed control supports gentle mixing through to vigorous vortex action
- Silicone mixing cup supports practical tube positioning during use
- Counterbalanced drive system supports quiet and smooth operation
- Power requirement listed as 240 V AC, 20 W
- Compact dimensions listed as H135 × D160 × W125 mm
$542.00 (Ex GST)
Variable-Speed Air Pump for Air Track or Air Table, 240 V AC Powe
- Mains-operated variable speed blower for air tracks and air tables, adjustable airflow to suit experiment lift requirements.
- Lower speed operation reduces noise, supports quieter classroom demonstrations and controlled airflow settings.
- Upper-face intake below carry handle reduces floor debris ingestion during routine lab and school use.
- Dual strainer system, one prevents particles entering intake, one prevents debris entering outlet orifice.
- Supplied with flexible hose for straightforward connection to linear air track or air table systems.
$409.90 (Ex GST)
Vernier Calipers For Laboratory and Educational Work
• Calipers for measuring length and dimensions in laboratory and educational work, range options listed to 150 mm
• Dial vernier caliper specified 0–150 mm with 0.02 mm resolution, described for reliable and accurate measurements
• Digital model listed 150 mm with 0.01 mm resolution and stainless steel construction stated for the measuring body
• Plastic caliper option listed 150 mm with 0.1 mm resolution, suitable for basic measurement tasks where high resolution is not required
• Sliding jaw caliper option listed 150 mm with 0.02 mm resolution, supplied without calibration certificate as stated
From $9.90 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Vertical Splash Heads Adapter for Distillation Assemblies, BORO 3.3 Glass
- Restricted Item – EUD Required: an End User Declaration (EUD) must be completed. A valid photo ID (such as a Passport, Driver Licence, or Proof of Age Card) is also required. Orders will not be shipped until all documentation is received and approved.
- Designed to reduce splashing and liquid carryover during distillation
- Improves vapour control and protects condensers from contamination
- Suitable for standard laboratory distillation and reflux assemblies
- Provides stable vertical alignment within glassware setups
- Ideal for teaching, research, and industrial laboratory use
- Made from BORO 3.3 borosilicate glass for high thermal and chemical resistance
- Supplied by LabChoice Australia for consistent laboratory performance
From $21.90 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Vibration Generator, Mechanical Vibration Demonstration Apparatus
• Produces controlled mechanical vibration when connected to a signal generator for physics and laboratory demonstrations
• Threaded armature extension supports attachment of plates and related items for Chladni’s figure experiments
• Strong base and enclosed plastic housing assist stable bench use and internal component protection
• Special coil design supports prolonged operation at maximum rating without overheating during practical use
• Fuse protection and shaft locking arrangement improve safety during operation, storage, and transportation
$174.50 (Ex GST)
Vigreux Fractionating Distillation Column, Borosilicate Glass (BORO 3.3)
- Restricted Item – EUD Required: For condensers with B19 ground joints or larger, an End User Declaration (EUD) must be completed. A valid photo ID (such as a Passport, Driver Licence, or Proof of Age Card) is also required. Orders will not be shipped until all documentation is received and approved.
- High-efficiency design for precise fractional distillation
- Uniform indentations ensure maximum vapour–liquid contact
- Crafted from durable BORO 3.3 borosilicate glass for heat and chemical resistance
- Ideal for purification, solvent recovery, and organic synthesis applications
- Compatible with standard ground-glass joints for easy system integration
- Made and supplied by LabChoice Australia – trusted labware quality
From $37.50 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Visking Dialysis Tubing, Laboratory Membrane Tubing for Diffusion Work
- Visking dialysis tubing for diffusion and osmosis demonstration work
- Made from seamless regenerated cellulose membrane material
- Supplied in practical 5 metre roll format
- Supports teaching of permeability, equilibrium, gradients, and plasmolysis
- Two size formats allow selection by supplied tubing dimensions
From $134.50 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Volatile Liquid Molecular Weight Apparatus, Vapour Behaviour Demonstration Set
• Standard laboratory apparatus for determining the molecular weight of volatile liquids in practical chemistry experiments
• Supports teaching of vapour behaviour, gas displacement, and classical molecular weight determination methods
• Suitable for educational and laboratory settings where clear chemistry demonstration equipment is required
• Packed carton size of 73 x 22 x 8 cm assists storage, handling, and freight planning considerations
• Fragile apparatus format requires careful transport, storage, and routine laboratory handling during use
$54.90 (Ex GST)
Volumetric Flask with PE Stopper, Class A, Borosilicate Glass (BORO 3.3)
- Class A tolerance for precision measurements
- Leak-resistant PE stopper ensures secure sealing
- Narrow neck design improves volumetric accuracy
- Used in titration, education, and research labs
- Preferred by professionals across Australia
- Made from LabChoice BORO 3.3 glass – High quality
From $9.50 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Volumetric Flask with PE Stopper, Class B, Borosilicate Glass (BORO 3.3)
- Class B tolerance suitable for general lab use
- Leak-proof PE stopper provides secure closure
- Narrow neck ensures better volume control
- Used in school labs, research, and QC testing
- Preferred for everyday solution preparation
- Made from LabChoice BORO 3.3 glass – High quality
From $7.00 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Volumetric Transfer Pipette, Class A, BORO 3.3
- Class A volumetric transfer pipette for precise fixed-volume liquid transfer
- Made from BORO 3.3 borosilicate glass for chemical and thermal resistance
- Designed for accurate measuring and dispensing in analytical laboratory work
- Suitable for education, research, quality control, and routine lab applications
- Clear calibration mark supports reliable volume reading and repeatable results
From $5.90 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Vortex Mixer, Fixed Speed 3000 rpm Laboratory Mixing Type
- 3,000rpm for shaking to rapid mixing of samples
- Touch or continuous operation mode
- Includes a standard top head for mixing a single test tube or other small vessel up to 30mm in diameter
- Electronic speed control maintains constant speed even during changes in load
- Steel base with specially designed vacuum suction feet provides stability and dampens vibration
- Robust aluminum-cast construction
$350.50 (Ex GST)
Save 30%
Vortex Mixer, Portable Laboratory Mixing Type up to 3000 rpm
- Compact , portable and fits nicelyon bench-top (erase desktops and table tops)
- Touch operation,Fixed speed of 3,000rpm for rapid mixing of samples
- Powerful and efficient 12V DC brushless motor is smooth operation and has long life
- Foot pad design secures the mixer in place and does not wobble during operation
$225.00 (Ex GST)
Save 27%
Vortex Mixer, Variable Speed Laboratory Mixing Type up to 3000 rpm
- Variable speed of 0 to 3,000rpm for gentle shaking to rapid mixing of samples
- Touch or continuous operation mode
- Includes a standard top head for mixing a single test tube or other small vessel up to 30mm in diameter
- Electronic speed control maintains constant speed even during changes in load
- Steel base with specially designed vacuum suction feet provides stability and dampens vibration
- Robust aluminum-cast construction
$275.50 (Ex GST)
Warming Coil Adapter B24 Joint BORO 3.3 Glass Laboratory Grade
- Designed for gentle heating and temperature control in glassware setups
- Compatible with B24 standard joints for secure connections
- Facilitates even heat distribution during distillation or reaction processes
- Ideal for maintaining sample temperature and preventing condensation
- Made from durable, heat-resistant BORO 3.3 borosilicate glass
- Expertly manufactured and quality-tested by LabChoice Australia
$89.90 (Ex GST)
Warming Coil Septa Support Adapter, BORO 3.3 Glass - Each
- Warming coil septa support adapter for laboratory glassware setups.
- Made from BORO 3.3 glass for chemical and thermal resistance.
- Supports controlled heating or warming around compatible assemblies.
- Septa support design allows use with suitable sampling or sealing points.
- Clear glass construction supports visual inspection during operation.
- Suitable for chemistry, research and teaching laboratory applications.
$9.90 (Ex GST)
Warming Trays
- Warming trays for controlled heating of laboratory samples and vessels
- Suitable for gentle warming across a flat heated surface
- Supports use with bottles, containers, glassware, and lab items
- Practical benchtop format for routine laboratory workflows
- Suitable for research, education, and general laboratory applications
From $1,254.00 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Wash Bottle with Fixed Straw, Leakproof, Material LDPE, High Quality - Each
- Fixed straw allows steady, upright dispensing
- Leakproof screw cap prevents accidental spills
- Flexible LDPE body for easy squeeze control
- Clear volume markings for accurate dispensing
- Ideal for solvents, distilled water, and lab rinsing
- Supplied by LabChoice Australia – Reliable quality
From $2.70 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Wash Bottle with Flexible Straw, Leakproof, Material LDPE, High Quality - Each
- Flexible straw enables precise directional dispensing
- Leakproof cap prevents spills and contamination
- Soft LDPE body allows easy squeeze action
- Graduated for controlled volume use
- Suitable for rinsing, dispensing solvents, or water
- Supplied by LabChoice Australia – Reliable quality
From $2.30 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Washable Adhesive Work Mat
- 60 x 60 mm and 332 x 166 mm sizes suit varied bench setups
- Double-sided adhesive supports placement on clean, dry, flat surfaces
- Helps keep containers, glassware and flat-bottomed flasks in place
- Washable surface can be wiped clean with a damp cloth to restore tack
- Reusable thousands of times for repeated laboratory holding support
- Can be trimmed to size for benches, trolleys and preparation areas
Watch Glasses, Soda Lime Glass, Laboratory Evaporation Cover Plates
- Manufactured from high quality soda lime glass for routine laboratory use
- Smooth, flat surface ideal for evaporation, sample observation, and small volume handling
- Commonly used as cover plates for beakers to reduce contamination and splashing
- Suitable for weighing solids, drying samples, and general laboratory handling
- Clear glass provides good visibility of samples during experiments
- Widely used in schools, universities, and routine laboratory applications
- Reliable laboratory-grade quality supplied by LabChoice Australia
From $10.99 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Water Bath Temperature Controller for Hot Plate
- Thermostat control for compatible IEC water bath and hot plate setup
- Fits to the edge of the IEC water bath
- Controls the hot plate to help hold water temperature constant
- Thermostat element slides down into the inner corner of the bath
- Probe can remain submerged when only a small water volume is used
- Suitable for wet water bath temperature control
- Can also support dry bath operation where the method is suitable
- For dry use, probe should press against the inside face of the metal bath
- Provides better regulation than manual hot plate adjustment
- Purchased separately from the IEC water bath
$236.90 (Ex GST)
Water Hardness Test Paper Strips, 50 Strip Pack
• Measures calcium carbonate water hardness quickly • Dual scale reading, ppm and grains per gallon • Calibrated from 0 to 500 ppm hardness • Fast hard or soft water assessment tool • Suitable for education and general water testing
$59.90 (Ex GST)
Water Turbine Hydro-Electric Power
- Demonstrates hydro-electric power generation in classroom experiments
- Shows energy conversion from moving water to electrical output
- Suitable for renewable energy and sustainability lessons
- Helps teachers explain turbine-driven electricity generation
- Supports hands-on physics and environmental science activities
- Useful for group demonstrations and student observation
- For laboratory or educational use under appropriate supervision
$216.90 (Ex GST)
Water Turbine Hydro-Electric Power Demo Spare Belt
- Replacement belt for water turbine hydro-electric power demo
- Suitable for LC-80-EM1639-01 demonstration apparatus
- Supports continued operation of classroom hydro-electric experiments
- Approximate belt diameter is 70 mm
- Spare belt only, main demonstration unit not included
- Useful for routine maintenance or belt replacement
- For laboratory or educational use under appropriate supervision
$11.50 (Ex GST)
Wave Demonstration Spring, Expanding Plastic Model for Classroom Physics
- Light weight plastic construction supports easy handling during repeated classroom and physics wave demonstrations
- Highly visible format helps students observe wave motion more clearly in practical teaching activities
- Expands from 50 cm to 370 cm for longer range demonstration of wave movement and propagation
- Suitable for mid air use where simple, direct visual explanation of wave behaviour is required
- Useful for school science lessons introducing foundational wave concepts through hands-on demonstration
$27.50 (Ex GST)
Weighing Measuring Scoop, BORO 3.3 Glass
- BORO 3.3 borosilicate glass weighing and measuring scoop for precise lab handling
- Suitable for transferring powders, crystals, and small solid samples
- Clear glass design allows easy visibility of sample quantity during use
- Good chemical resistance for routine laboratory weighing and preparation tasks
- Smooth formed surface helps with clean transfer and easy cleaning
- Reusable glass scoop for schools, universities, research, and industrial labs
- Ideal for sample prep, reagent handling, and general bench work in Australian laboratories
From $14.90 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
West Condenser BORO 3.3 for Efficient Reflux Cooling
- Designed for efficient vapour cooling in reflux and distillation setups
- Straight-tube inner path with narrow cooling jacket for stable heat exchange
- Made from BORO 3.3 glass compliant with ISO 3585 and ASTM E438 Type I, Class A
- High resistance to thermal shock, acids and organic solvents
- Smooth vapour flow and reliable condensate return for reproducible reactions
- Interchangeable ground glass joints for seamless compatibility with standard labware
From $44.90 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Wimshurst Machine for Electrostatic Charge
- Demonstrates electrostatic charge generation, storage and visible discharge for physics education.
- Hand crank rotates twin plates in opposite directions to build static electricity.
- Leyden jar capacitors store charge before spark discharge between terminals.
- Mounted on a wooden base with rubber feet for stable classroom use.
- Compact demonstration size with 300 × 180 mm base and 300 mm height.
- Suitable for supervised lessons on electrostatics, induction, capacitance and electrical discharge, as students observe charge separation and transfer safely during guided classroom experiments.
$174.50 (Ex GST)
Wimshurst Machine Spare Belts, Replacement Belt Set
- Replacement belts for compatible Wimshurst machine demonstrations
- Suitable for LC-80-EM1641-01 Wimshurst machine
- Used to support plate rotation during electrostatics experiments
- Approximate belt circumference is 45 cm
- Suitable for approximately 140 mm diameter belt path
- Available as spare belt only or spare belt pair
- For laboratory or educational use under appropriate supervision
From $12.50 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Wind Energy Generator Kit, Classroom Electricity Generation Demonstration Type
- Designed for renewable energy teaching, helping demonstrate how wind motion can be converted into useful electrical output
- Operates on low wind, making it practical for classroom experiments without requiring strong outdoor airflow conditions
- Can be driven by a table fan, supporting simple indoor demonstration of wind-powered generation principles
- Produces current for a motor or lamp, allowing visible observation of energy transfer in action
- Useful for science lessons covering sustainability, alternative energy, and basic electricity generation concepts
$216.90 (Ex GST)
Wind Vane and Speed Indicator, Classroom Environmental Science Demonstrator
- Combined wind vane and speed indicator format supports practical weather and environmental science demonstration activities
- Plastic construction with 190 x 140 mm size provides a clear classroom model for routine educational use
- 90 x 90 mm base supports stable bench placement during teaching, display, and demonstration sessions
- Simple north alignment and pointer reading method helps students understand wind direction observation in practice
- Suitable for laboratory and educational settings where supervised weather study tools are required for learning
$49.90 (Ex GST)
didn't see what you are looking for ?
We’ll source it or make it for you. LabChoice supports your research every step.