Microplate Vortexer Medium - Hold up to 4 x 96 well microtiter plates
- Holds up to 4 x 96-well microtiter plates
- Variable speed control for gentle to vigorous mixing
- Smooth, quiet operation with counterbalanced drive system
- Suitable for extended unattended operation when required
- Stainless steel locating springs help secure plates in place
- Operating range: 0°C to 45°C, up to 80% RH non-condensing
AUD 1,600.00 (Ex GST)
Microscope Coverslips, 0.13–0.17 mm, Pack of 100
- Microscope coverslips for slide preparation and microscopy work
- Thickness range listed as 0.13–0.17 mm
- Supplied in packs of 100
- Available sizes include 18 × 18 mm, 20 × 20 mm and 22 × 22 mm
- Rectangular size options include 22 × 40 mm and 22 × 50 mm
- Suitable for compatible microscope slide sample preparation
- Helps flatten and protect prepared specimens during observation
- Useful for school, university, pathology, biology and teaching laboratories
- Supports routine wet mount and prepared slide workflows
- Confirm coverslip size and microscope method before ordering
- Handle carefully due to thin, fragile edges
- Use under appropriate laboratory or educational supervision
From AUD 1.90 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Microscope Glass Slides One Side Frosted, Laboratory Use
- One side frosted microscope glass slides for clear labelling and sample identification
- High quality clear glass with uniform thickness for consistent optical performance
- Frosted end supports pencil or marker labelling without smudging
- Smooth polished edges for safe handling during slide preparation
- Suitable for routine microscopy in schools, universities, research, and clinical laboratories.
From AUD 8.50 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Microscope Lamps, Laboratory Illumination Type
- Microscope lamps for bench illumination, options for 220/240V mains or 12V AC/DC low voltage operation
- 240V models use 25W pearl lamp with clear or blue tint front glass, blue tint compensates red content
- 12V model uses 12V 20W QI lamp with inbuilt reflector, runs cooler and provides brighter whiter beam
- Strong stainless steel stand holds lamp body, removal by firm pull to spring off stand, described as virtually unbreakable
- Cable options: 1 m two core mains lead with two pin plug, or 1 m lead with stackable 4 mm plugs and lamp to lamp plug through
From AUD 71.90 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Microscope Slide Draining Tray, ABS, Holds 100 Slides
- Slide draining tray for microscope slide handling
- Designed for drying and draining processed slides
- Holds up to 100 slides as listed
- Brand listed as Polylab
- Supplied as 1 piece per pack as listed
- Ridges or grooves help keep slides upright
- Helps reduce slide contact with unsuitable surfaces
- Compact and space-saving tray design
- Strong construction as listed
- Useful for staining, washing and slide preparation workflows
- Material should be confirmed before final catalogue upload
- Use under appropriate laboratory or educational supervision
AUD 19.90 (Ex GST)
Microscope Slides, Single Frosted for microscopy sample preparation Pack of 50
- Microscope slides for laboratory and educational use
- SAIL brand as listed
- Standard slide size listed as 76 × 25 mm
- Thickness listed as 1.0–1.2 mm
- Supplied as pack of 50 slides
- Single frosted marking area as listed
- Frosting listed on 2 sides
- Polished edge finish as listed
- Suitable for microscopy sample preparation
- Useful for biology, pathology teaching and general lab workflows
- Glass slides may break and create sharp edges
- Use under appropriate laboratory or educational supervision
AUD 5.50 (Ex GST)
Midget Impinger Bubbler for Air Sampling, Standard Tip, BORO 3.3 Glass
- Midget impinger air sampler bubbler for laboratory use
- Made from borosilicate glass 3.3 as listed
- Standard tip impinger design as listed
- Designed to collect airborne contaminants into a liquid medium
- Works by bubbling sampled air through a trapping solution
- Useful for personal air sampling applications as listed
- Supports airborne concentration measurement workflows
- Compact format suitable for field and laboratory sampling
- Available capacities include 35 mL to 240 mL
- Images are representative of the product group as listed
- Confirm pump, flow rate and method compatibility before use
- Use under appropriate laboratory or educational supervision
From AUD 36.50 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Mild Steel and Brass Weight Set with Tray
- Weight set supplied on moulded tray
- Includes mild steel and brass weights
- Provides weighing range from 10 g to 1990 g
- Brass weights include 2 × 100 g, 1 × 50 g, 1 × 20 g and 2 × 10 g
- Steel weights include 1 × 1 kg, 1 × 500 g and 1 × 200 g
- Total combined weight listed as 1990 g
- Suitable for weighing, mass comparison and classroom balance activities
- Useful for school, university and teaching laboratory use
- Tray dimensions listed as approximately 240 × 110 mm
- Practical storage tray helps keep weights organised
- Not supplied as a certified calibration weight set unless specified
- Use under appropriate laboratory or educational supervision
AUD 84.90 (Ex GST)
Millikan’s Apparatus, Electron Charge Demonstration Unit
- Millikan's apparatus designed for determining the elementary electric charge through charged particle experiments
- Available in two configurations: with built-in power supply and without power supply
- Uses atomised latex solution to introduce small charged spheres into an observation cell
- Rubber hose induces static electric charge on latex particles during transfer
- Parallel metal plates generate a controlled electric field for particle movement experiments
- Adjustable cell voltage from approximately 0 to 300 V DC
- Reversing switch allows the polarity of the electric field to be changed
- Small observation telescope with graticule for tracking charged particle movement
- Integrated illumination system provides visibility of particles inside the cell
- External power supply model requires separate electrical connections for the illuminator and cell plates
- Built-in power supply model provides the required electrical power from its integrated system
- Suitable for atomic physics, electrostatics, charge measurement and educational laboratory experiments
From AUD 824.90 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Mineral Specimens For Education
- Individual mineral specimens for education and display, supports mineral identification, comparison and classroom geology activities
- Malachite option specified crystalline on matrix, pack of 10, country of origin stated USA, suitable for studying crystal habit and matrix occurrence
- Additional minerals listed muscovite, olivine in basalt and plagioclase feldspar, supports common teaching collections and rock forming mineral recognition
- Ore mineral options listed pyrite massive and sphalerite massive, supports metallic mineral comparison and identification activities
- Safety guidance provided, avoid ingestion and dust, test only in ventilated areas with PPE, wet sample or tray use, wash hands, store dry, not intended for cosmetic, pharmaceutical or industrial use
From AUD 27.50 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Mineral Specimens for Educational Geology
- Individual mineral specimens for education and display, supports mineral identification, comparison and classroom geology activities
- Biotite supplied as black cleavage plates, 10 pieces, country of origin stated USA, suitable for studying cleavage behaviour and sample variability
- Additional listed minerals include calcite cleavages, chalcopyrite, dolomite and cleavable fluorite, supports common teaching collections
- Safety guidance provided, keep away from young children, avoid ingestion, do not grind or create dust, test only in ventilated areas with PPE
- Use small amounts on a tray or wet sample, wash hands after handling, store intact away from moisture or heat, not intended for cosmetic, pharmaceutical or industrial use
From AUD 29.90 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Mini Dry Bath with Heating and Cooling Lid with Choice of 1 Heating Block, up to 100°C
- Compact mini dry bath supplied with one interchangeable heating block for flexible sample handling
- Supports both heating and cooling functions across a temperature range of 0°C to 100°C
- User-friendly touch interface enables precise digital control for routine laboratory applications
- Adjustable timer settings from 0 to 999 minutes or seconds for varied experimental needs
- Rapid heating capability from 25°C to 100°C within 20 minutes for efficient workflows
- Cooling performance from 20°C to 0°C within 25 minutes for temperature-sensitive samples
- Equipped with USB connectivity, error code display, and recalibration function for reliability
AUD 755.50 (Ex GST)
Mini Dry Bath with Heating, Cooling and Hot Lid, with Choice of 1 Heating Block up to 100°C
- Mini dry bath supplied with a choice of 1 compatible heating block for flexible sample handling
- Heating and cooling temperature range supports 0°C to 100°C for versatile laboratory applications
- Hot lid helps reduce water condensation on tube caps during heating processes
- Heating from 25°C to 100°C is listed as ≤20 minutes for efficient temperature ramping
- Cooling from 20°C to 0°C is listed as ≤25 minutes for rapid sample cooling
- Supports 9 programs with 2 steps for each program to streamline routine workflows
- Includes USB interface support, error code display and user recalibration function for improved usability and monitoring
AUD 857.50 (Ex GST)
Mini Electric Circular Motion Kit with Speed Control
- Modern circular motion kit for physics education
- Designed for classroom centripetal force experiments
- Compact electric system for safer indoor demonstrations
- Includes speed control for adjusting rotational motion
- Provides more convincing results than older PSSC style systems
- Useful for teaching circular motion and centripetal force
- Supports lessons on speed, radius, mass and inward force
- Designed to improve accuracy during classroom experiments
- Safer alternative to outdoor washer-and-cord style demonstrations
- Suitable for school, university and teaching laboratory use
- Moving parts should be handled carefully during operation
- Use under appropriate laboratory or educational supervision
AUD 211.90 (Ex GST)
Mini Magnetic Stirrer, Brushless Motor for Laboratory Mixing
- Compact magnetic stirrers designed for routine laboratory liquid mixing and sample preparation
- Available in three capacities: 1 L, 1.5 L and 2 L
- MS3 model offers a 1 L stirring capacity with adjustable speed from 200 to 1800 rpm
- MS5S model offers a 2 L stirring capacity with adjustable speed from 200 to 2000 rpm
- Compact Round 1.5 L model provides stepless speed adjustment from 300 to 2000 rpm
- Brushless motors support efficient operation and reduced mechanical maintenance
- Rotary knob controls allow convenient adjustment of stirring speed
- MS3 and MS5S feature PVC work plates with diameters of 125 mm and 135 mm respectively
- Compact Round 1.5 L model features a chemically resistant PET work plate
- MS5S includes an LCD display for monitoring stirring speed
- MS3 and MS5S feature IP42-rated housing protection
- Suitable for chemistry, biology, research, educational and quality control laboratories
From AUD 99.90 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Mini Pipette Fixed Volume Premium Quality with Volume Ranges
- Mini fixed volume pipette designed for routine liquid transfer and laboratory applications
- Compact and lightweight construction supports convenient handling during pipetting tasks
- Fixed volume mechanism delivers a predetermined liquid volume with each operation
- Available in different fixed volume options to suit individual laboratory requirements
- Single-channel design allows controlled aspiration and dispensing of small liquid volumes
- Manual plunger operation provides straightforward handling without batteries or electricity
- Suitable for repetitive dispensing tasks requiring the same selected liquid volume
- Designed for use with compatible disposable pipette tips for routine sample handling
- Ideal for research, diagnostic, biotechnology, teaching and general laboratory applications
From AUD 19.90 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Mini Power Supply, Low Voltage Regulated Type
- Compact IEC transformer power sources with 240V mains input and fixed 6V and 12V outputs
- Available as DC only outputs for DC motors and electromagnet experiments, or AC only outputs for light box and lamps
- Total load rated 4 amps, designed for classroom and bench low voltage equipment operation
- Each output has self resetting overload protection, trips above 4 amps and resets when overload removed
- Supplied with mains power cable, AC model sized to fit reserved compartment in Hodson styrene foam housing
From AUD 129.50 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Mini Projectile Launcher for Projectile Motion
- Mini projectile launcher for physics teaching experiments
- Designed for exploring projectile motion and trajectories
- Release latch can be adjusted and locked at the desired setting
- Supplied with 2 drilled balls as listed
- Includes attached protractor for angle setting
- Includes plumb bob for determining angle of inclination
- Includes clamp to fasten apparatus to a tabletop
- Supplied with instructions as listed
- Useful for range, angle and trajectory demonstrations
- Suitable for school and university physics laboratories
- Keep clear of the launch path during use
- Use under appropriate laboratory or educational supervision
AUD 136.90 (Ex GST)
Mini Sodium Light Source for Spectrometer Atomic Absorption Experiments
- Mini sodium light source for compatible spectrometer AA experiments
- Suitable for use with compatible flame spectrometers and optical work
- Designed for classroom spectroscopy teaching and demonstration use
- Can be used with mercury, sodium, neon or helium spectral lamps
- Tubular lamp is mounted inside a cylindrical pillar on the power supply
- Rotating ventilated shield includes slits and apertures for viewing control
- Suitable for supervised laboratory and educational spectroscopy activities
AUD 619.90 (Ex GST)
Mini Spectral Lamp Power Supply and Holder, Without Lamp
- Compact spectral lamp power unit with integrated lamp holder
- Combines power supply and lamp holder in one bench-friendly design
- Supplied without spectral lamp
- Spectral lamp mounts inside a black protective tube on top of the unit
- No separate tube holder or connecting cable required
- Rotating outer sleeve allows different aperture shapes to be selected
- Apertures are positioned for use with IEC Flame and “AA” Spectrometer LC-80-CH3792-001
- Accepts compatible sodium, mercury, neon and helium spectral lamps
- Suitable for spectral line observation in optics and atomic physics practicals
- Confirm lamp compatibility, spectrometer alignment and classroom safety requirements before use
AUD 435.90 (Ex GST)
Mini Vortex Mixer, 3000 rpm Compact Tube Oscillator for Quick Laboratory Mixing
- Mini vortex mixer for laboratory tube mixing
- Brand listed as NEST
- Designed for jog / trigger-type operation
- Compact bench footprint for routine laboratory use
- Oscillation mode listed as circumference oscillation
- Orbital diameter listed as Φ4.5 mm
- Speed listed as 3000 rpm
- Suitable for tubes up to Φ30 mm as listed
- Maximum capacity listed as 80 mL
- Refined steel base supports stability during operation
- Use under appropriate laboratory or educational supervision
AUD 311.50 (Ex GST)
MiniPak Switched AC/DC Power Supply, 2 - 12 V, 5 A
- Compact MiniPak general purpose power supply for laboratory and education use
- Provides switched AC and DC outputs at 2, 4, 6, 8, 10 and 12 V
- Output current listed as about 5 to 6 A
- DC output is full-wave rectified but not filtered
- Uses 4 mm safety sockets instead of 4 mm terminals
- Rear panel mains switch
- Power-on LED indicator included
- LED changes from green to red when output overload occurs
- Automatically resetting overload protection with audible click
- Housing includes carry handles and rubber feet
AUD 267.50 (Ex GST)
Mohr Tubing Clip for Controlling Air and Gas Flow
- Mohr tubing clip for flexible laboratory tubing
- Designed to quickly stop air or gas flow
- Suitable for compatible flexible tubes
- Length listed as 60 mm
- Useful for temporary flow control in laboratory setups
- Practical clip for physics, chemistry and general science demonstrations
- Helps close tubing without disconnecting apparatus
- Suitable for school, university and teaching laboratory use
- Confirm tubing outer diameter and material compatibility before use
- Clip only, tubing and apparatus are not included
- Do not use for high-pressure or hazardous gas systems unless approved
- Use under appropriate laboratory or educational supervision
AUD 8.90 (Ex GST)
Mojonnier Extraction Flask, Borosilicate Glass, 25 mL
- Mojonnier extraction flask for laboratory use
- Designed for fat extraction and food analysis workflows
- Suitable for dairy and food product testing applications
- Capacity listed as 25 mL
- Manufactured from borosilicate glass
- Extraction chamber diameter listed as 35 mm
- Top opening fitted with 19/26 glass joint
- Useful for controlled solvent extraction procedures
- Suitable for analytical chemistry, food testing and teaching laboratories
- Confirm method, joint size and solvent compatibility before use
- Solvents and extraction accessories are not included
- Use under appropriate laboratory or educational supervision
AUD 49.50 (Ex GST)
Molecular Model Set, Biochemistry Teacher Set
- Teacher molecular model set for biochemistry education
- Designed for building biomolecule and biochemical structure models
- Material listed as Polystyrene (PS) / Polyethylene (PE)
- Includes carbon, nitrogen, oxygen, hydrogen, sulphur, phosphorus and metal parts
- Includes 270 connectors as listed
- Includes 1 link remover tool
- Suitable for large and extended molecular structures
- Useful for amino acids, organic molecules and biochemical concept demonstrations
- Supports classroom, laboratory and advanced chemistry teaching
- Helps students visualise molecular geometry and biological interactions
- Small parts may present a choking hazard
- Use under appropriate laboratory or educational supervision
AUD 420.50 (Ex GST)
Molecular Model Set, Cholesterol, C₂₇H₄₆O
- Molecular model set for cholesterol structure demonstration
- Represents cholesterol with formula C₂₇H₄₆O
- Material listed as Polystyrene (PS) / Polyethylene (PE)
- Includes 27 carbon parts as listed
- Includes 46 hydrogen parts as listed
- Includes 1 oxygen part as listed
- Includes 110 connectors as listed
- Includes 1 link remover tool as listed
- Useful for studying lipids, sterols and biomolecule structures
- Supports classroom, laboratory and advanced biochemistry teaching
- Small parts may present a choking hazard
- Use under appropriate laboratory or educational supervision
AUD 120.50 (Ex GST)
Molecular Model Set, Diamond
- Molecular model set for diamond structure demonstration
- Designed for teaching carbon allotropes and solid-state structures
- Material listed as Polystyrene (PS) / Polyethylene (PE)
- Includes 30 listed atom parts
- Includes 45 connectors as listed
- Demonstrates the 3D tetrahedral lattice arrangement of diamond
- Useful for covalent bonding and crystal structure teaching
- Supports classroom, laboratory and academic workshop demonstrations
- Helps students visualise hardness and structural properties of diamond
- Confirm listed atom type before final catalogue upload
- Small parts may present a choking hazard
- Use under appropriate laboratory or educational supervision
AUD 37.90 (Ex GST)
Molecular Model Set, Glucose, C₆H₁₂O₆
- Molecular model set for glucose structure demonstration
- Designed for carbohydrate and biochemistry learning
- Represents glucose with formula C₆H₁₂O₆
- Material listed as Polystyrene (PS) / Polyethylene (PE)
- Includes carbon, hydrogen and oxygen parts as listed
- Includes 70 connectors as listed
- Includes 1 link remover tool
- Supports visual learning of glucose molecular arrangement
- Useful for open-chain and cyclic glucose structure discussion
- Suitable for classroom, laboratory and academic training use
- Small parts may present a choking hazard
- Use under appropriate laboratory or educational supervision
AUD 37.90 (Ex GST)
Molecular Model Set, Glyceryl Tristearate Fat, C₅₇H₁₁₀O₆
- Molecular model set for glyceryl tristearate fat structure demonstration
- Designed for teaching lipid, fat and triglyceride structures
- Represents glyceryl tristearate with formula C₅₇H₁₁₀O₆
- Material listed as Polystyrene (PS) / Polyethylene (PE)
- Includes carbon, hydrogen and oxygen parts as listed
- Includes 200 connectors as listed
- Includes 1 link remover tool
- Supports visual learning of triglyceride formation
- Useful for ester linkage and long-chain fatty acid demonstrations
- Suitable for classroom, laboratory and academic training use
- Small parts may present a choking hazard
- Use under appropriate laboratory or educational supervision
AUD 189.90 (Ex GST)
Molecular Model Set, Graphite
- Molecular model set for graphite structure demonstration
- Designed for teaching carbon allotropes and solid-state structures
- Material listed as Polystyrene (PS) / Polyethylene (PE)
- Includes 45 carbon parts as listed
- Includes 72 connectors as listed
- Demonstrates the layered structure of graphite
- Helps show hexagonal carbon atom arrangements
- Useful for explaining bonding and material properties
- Supports classroom, laboratory and academic workshop use
- Suitable for chemistry, materials science and solid-state teaching
- Small parts may present a choking hazard
- Use under appropriate laboratory or educational supervision
AUD 38.50 (Ex GST)
Molecular Model Set, Inorganic / Organic Student Set
- Student molecular model set for inorganic and organic chemistry
- Material listed as Polystyrene (PS) / Polyethylene (PE)
- Includes carbon, hydrogen, oxygen, nitrogen, sulphur, phosphorus, halogen, boron and metal parts
- Includes 42 connectors as listed
- Includes orbital 2D, sp³, dsp³ and d²sp³ parts as listed
- Suitable for building basic inorganic and organic molecular structures
- Useful for bonding, valency and molecular geometry learning
- Supports classroom demonstrations, laboratory exercises and self-practice
- Compact student set for everyday chemistry study and revision
- Small parts may present a choking hazard
- Use under appropriate laboratory or educational supervision
AUD 95.90 (Ex GST)
Molecular Model Set, Inorganic / Organic Teacher Set
- Teacher molecular model set for inorganic and organic chemistry
- Supports classroom demonstration of molecular structures and bonding
- Material listed as Polystyrene (PS) / Polyethylene (PE)
- Includes carbon, oxygen, hydrogen, nitrogen, sulphur, phosphorus, halogen and metal parts
- Includes orbital 2D links and connectors as listed
- Suitable for building a wide variety of chemical structures
- Useful for molecular geometry, bonding and coordination chemistry teaching
- Designed for repeated classroom and laboratory demonstration use
- Helps students visualise complex chemical structures interactively
- Suitable for school, university and advanced chemistry teaching
- Small parts may present a choking hazard
- Use under appropriate laboratory or educational supervision
AUD 420.90 (Ex GST)
didn't see what you are looking for ?
We’ll source it or make it for you. LabChoice supports your research every step.