Mohr Tubing Clip for Controlling Air and Gas Flow
AUD 8.90(Ex GST)
AUD 8.90(Ex GST)
- Mohr tubing clip for flexible laboratory tubing
- Designed to quickly stop air or gas flow
- Suitable for compatible flexible tubes
- Length listed as 60 mm
- Useful for temporary flow control in laboratory setups
- Practical clip for physics, chemistry and general science demonstrations
- Helps close tubing without disconnecting apparatus
- Suitable for school, university and teaching laboratory use
- Confirm tubing outer diameter and material compatibility before use
- Clip only, tubing and apparatus are not included
- Do not use for high-pressure or hazardous gas systems unless approved
- Use under appropriate laboratory or educational supervision
[request_quote_button]
- Description
Description
The Mohr Tubing Clip, also known as a Mohr clamp or flexible tubing shut-off clip, is designed for quickly stopping air or gas flow through compatible flexible tubing. This clip provides a simple manual way to pinch suitable tubing closed during laboratory demonstrations, classroom experiments and routine apparatus setup. The listed length is 60 mm, making it a practical size for use with compatible flexible tubes in school science laboratories, university teaching laboratories and preparation rooms.
Mohr tubing clips are useful where temporary flow control is required without disconnecting tubing from the apparatus. Users should confirm tubing outer diameter, wall thickness, tubing material, flow type, pressure conditions and experiment method before use. Do not use this clip with rigid tubing, cracked tubing, unsuitable tubing materials, high-pressure gas systems, corrosive gases or hazardous flow systems unless the application has been assessed and approved.
This product is intended for laboratory or educational settings only and should be used under appropriate supervision. This item is supplied as the Mohr tubing clip only. Flexible tubing, gas supply, air pump, glassware, regulators, valves and additional laboratory accessories are not included unless specified separately.
LabChoice Australia supplies Mohr Tubing Clips and laboratory tubing control accessories for school science laboratories, university teaching laboratories and educational facilities requiring practical tools for air, gas and tubing flow control.
Stirring Rods, Rounded Ends, Laboratory Grade, Borosilicate Glass (BORO 3.3)
From AUD 0.95 (Ex GST)
Mechanical Quadruple Beam Balance, 311 g × 0.01 g
AUD 224.50(Ex GST)
Density Cube Sets, 2.0 cm and 2.5 cm, in Case
From AUD 67.50 (Ex GST)
Brass Slotted Spare Weights, Economy, 50 g and 100 g
From AUD 6.50 (Ex GST)
Electric Fields Apparatus and Junior Electricity Lab Kit
From AUD 61.50 (Ex GST)
Retort Clamp, Four Prongs, Powder Coated Finish, High Quality
From AUD 11.90 (Ex GST)
Polypropylene Laboratory Spatula with Spoon and Shovel Ends
From AUD 1.20 (Ex GST)
ORP Sensor, Replacement Sensor for Pocket ORP Meter
AUD 143.00(Ex GST)
Chromatography Column with Fritted Disc, BORO 3.3 Glass
AUD 54.50(Ex GST)
You May Also Need
Adjustable Thermometer Holder Clamp with Bosshead
AUD 14.90(Ex GST)
Burette Clamp, Fisher Type, Powder Coated Steel, Single/ Double
From AUD 6.90 (Ex GST)
Condenser Holder Clamp, High Quality, Fits Up to 75mm Diameter Equipment
From AUD 12.00 (Ex GST)
Laboratory Platform Jacks, Height Adjustable Apparatus Support Range
From AUD 118.50 (Ex GST)
Laboratory Stainless Steel Platform Jack, Height Adjustable
From AUD 299.90 (Ex GST)
PVC Coated Flask Weight Rings, Bench Stability Support Range
From AUD 14.90 (Ex GST)
Retort Clamp, 3-Prong, Adjustable with Non-Slip Rubber Jaws for Secure Grip, High Quality
From AUD 12.00 (Ex GST)
Retort Clamp, Four Prongs, Powder Coated Finish, High Quality
From AUD 11.90 (Ex GST)
Retort Ring, Stainless Steel with Attached Bosshead, Rust-Resistant, High Quality
From AUD 8.90 (Ex GST)
Rubber Mat for Air Lifting Atmospheric Pressure
AUD 92.50(Ex GST)
Square Cube Bosshead Clamp Holder
From AUD 14.90 (Ex GST)
Test Tube Holder, Wooden Peg Type, 180 mm Long
AUD 3.50(Ex GST)
Wire Gauze Mats, Single Piece, Lab-Grade
From AUD 2.20 (Ex GST)
[porto_related_products_slider]
Recently Viewed Products
SELECT OPTIONS
Sound Level Meter for Measuring Noise and Sound Levels
AUD 171.90(Ex GST)
SELECT OPTIONS
Laboratory Safety Goggles with Vents for Eye Protection
AUD 16.50(Ex GST)
SELECT OPTIONS
Air Track Inclination Blocks, Plastic, Set of 4
AUD 8.90(Ex GST)
FEATURED PRODUCTS
BEST SELLING PRODUCTS
Petri Dishes, Polypropylene, Autoclavable & Reusable, High Quality
From AUD 1.20 (Ex GST)
Glass Petri Dishes with Lid, Autoclavable, Borosilicate Glass (BORO 3.3)
From AUD 3.90 (Ex GST)
Reagent Bottles, Wide Mouth, HDPE, Chemical-Resistant, Highly Reliable & Durable - Each
From AUD 1.50 (Ex GST)
LATEST PRODUCTS
Carrier Tray, Polypropylene, for Laboratory Transport and Handling
AUD 59.90(Ex GST)
Glass Filter Holder Base, 47 mm with Sintered Support, BORO 3.3
AUD 229.90(Ex GST)
Polypropylene Utility Tray for Laboratory Storage and Handling
From AUD 44.90 (Ex GST)
TOP RATED PRODUCTS
Carrier Tray, Polypropylene, for Laboratory Transport and Handling
AUD 59.90(Ex GST)
Glass Filter Holder Base, 47 mm with Sintered Support, BORO 3.3
AUD 229.90(Ex GST)
Polypropylene Utility Tray for Laboratory Storage and Handling
From AUD 44.90 (Ex GST)
What Our Customers Say
⭐⭐⭐⭐⭐
We ordered a set of customised BORO 3.3 borosilicate glassware for our teaching labs, and LabChoice Australia exceeded every expectation. From the first consultation to final delivery, their team listened carefully, offered expert advice, and ensured every piece matched our specifications perfectly.
The clarity and precision of the glassware are exceptional, and the quick turnaround made setup effortless. It’s refreshing to work with an Australian supplier who genuinely understands laboratory needs and takes pride in quality craftsmanship. We’ll definitely be returning to LabChoice for future glassware requirements
⭐⭐⭐⭐⭐
Our lab required high-precision BORO 3.3 glassware for analytical testing, and LabChoice Australia delivered outstanding results. The ordering process was simple, communication was clear, and every beaker and flask arrived perfectly calibrated and ready for use.
The quality of the glass is exceptional — resistant to heat, easy to clean, and consistently accurate in measurement. It’s reassuring to know there’s an Australian supplier that combines scientific precision with genuine customer care. I’d recommend LabChoice to any research team looking for dependable labware
⭐⭐⭐⭐⭐
We needed a set of customised borosilicate glassware for a specialised project, and LabChoice Australia delivered exactly what we envisioned. The team worked closely with us from design to production, ensuring every detail met our specifications. The craftsmanship is exceptional, and the turnaround time was impressive. It’s reassuring to know we can rely on them for unique, made-to-order pieces
⭐⭐⭐⭐⭐
LabChoice Australia has completely changed the way we source our lab glassware. The quality is consistently top-notch, and every piece meets the precision we need for reliable results. Their team knows their stuff, answers our questions quickly, and always goes the extra mile to help — they’re more like partners than just a supplier.
⭐⭐⭐⭐⭐
We trust LabChoice Australia because they deliver every time. Their borosilicate glassware is durable, accurate, and perfect for the high-heat work we do. Everything arrives well-packed with clear specs, so there are never surprises. It’s reassuring to deal with a supplier who understands both compliance and the demands of a busy lab