Biological Small Skeleton Model, 850 mm on Stand
- Small biological skeleton teaching model for anatomy education
- Height listed as 85 cm, approximately 1/2 adult natural size
- Mini-skeleton with accurate anatomical detail
- Made from PVC
- Skull can be dismantled into 3 parts
- Skull separates at skull cap, base and lower jaw
- Arms and legs are movable
- Supplied on a stable heavy stand and base
- Model is removable from the stand
- Outer carton quantity listed as 4 pieces
- Outer carton size listed as 50.5 × 34 × 52 cm
- Outer carton gross weight listed as 9.5 kg
AUD 124.50 (Ex GST)
Biological Stomach Model, 2 Parts on Stand
- Human stomach teaching model for biology and anatomy education
- Supplied as a 2 part model
- Mounted on stand for classroom display
- Size listed as 16 × 11 × 23 cm
- Useful for teaching stomach structure and digestive anatomy
- Supports lessons on the human digestive system
- Suitable for school, university and teaching laboratory use
- Practical visual aid for classroom demonstrations and revision
- Intended for laboratory or educational settings only
- Use under appropriate teacher or laboratory supervision
AUD 99.90 (Ex GST)
Biological Teeth Care Model with Brush
- Teeth care teaching model for biology and health education
- Supplied with brush for tooth brushing demonstrations
- Useful for teaching basic oral hygiene and dental care
- Model size listed as 200 × 150 × 120 mm
- Supports classroom explanation, observation and practical demonstration
- Suitable for school, university and teaching laboratory use
- Practical visual aid for human biology and health science lessons
- Can be used alongside diagrams, worksheets and approved teaching resources
- Intended for laboratory or educational settings only
- Use under appropriate teacher or laboratory supervision
AUD 83.50 (Ex GST)
Bird Drinking Heat Thermodynamics Demonstration
- Drinking bird apparatus for heat and thermodynamics demonstrations
- Demonstrates evaporative cooling and vapour pressure change
- Shows energy transfer using a visible tipping motion
- Useful for explaining evaporation, condensation and pressure difference
- Head cooling occurs as water evaporates from the bird’s fuzzy head
- Vapour pressure difference causes the liquid to move and the bird to tip
- Suitable for classroom physics and science demonstrations
- Useful for heat, energy and phase-change teaching activities
- Contains methylene chloride vapour as listed in the supplied explanation
- Handle carefully as a sealed demonstration apparatus
- Do not break, heat, puncture or modify the unit
- Use under appropriate laboratory or educational supervision
AUD 18.90 (Ex GST)
Black Bars for Universal Attachments for Shakers
- Black accessory bars for compatible universal shaker attachments
- Suitable for selected universal shaker attachment systems
- Designed for use with matching universal attachment setups
- Black finish supports clear accessory identification
- Helps users select replacement or matching bars based on attachment type
- Suitable for compatible shaker flask holding attachment workflows
- Confirm attachment fit and shaker setup compatibility before use
Block for Cuvettes
- 18 x 10 mm square cuvette capacity supports dry block heater workflows
- Chemical-resistant black anodised finish suits routine block heater use
- L95 x W75 x H50 mm block dimensions support compatible heater placement
- Black anodised aluminium construction supports rapid block heat transfer
- Designed to fit many other dry block heater brands for flexible lab use
- Also known as dry bath block, constant temperature block, or cuvette block
AUD 392.00 (Ex GST)
Block for Epp Tubes
- Fits 1.5 mL, 0.5 mL and 0.2 mL Epp tube heating workflows
- 20, 30 and 48 hole formats support different sample capacities
- Tapered hole base supports suitable tube fit in each block format
- Black anodised aluminium construction supports rapid heat transfer
- Thermometer reference hole included for temperature reference use
- L95 x W75 x H50 mm block size suits compatible dry block heaters
From AUD 255.00 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Block for Falcon Tubes
- Fits 15 mL and 50 mL Falcon tube heating workflows
- 12 hole and 4 hole formats support different tube capacities
- Conical hole base supports suitable Falcon tube placement
- Black anodised aluminium construction supports rapid heat transfer
- Thermometer reference hole included for temperature reference use
- Evaporation manifolds available to suit compatible applications
From AUD 255.00 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Blue Nitrile Gloves, Powder Free Disposable Safety Gloves for Hand Protection
- Blue nitrile gloves, powder free design for clean and low-residue handling
- Suitable for laboratory, cleaning, inspection, and general workplace tasks
- Nitrile material offers a durable alternative to natural latex gloves
- Powder free finish helps reduce surface contamination on samples and equipment
- Blue colour improves visibility and supports easy glove change checks
From AUD 9.90 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Boiling Flask Flat Bottom, Socket Joint, Short Neck, Borosilicate Glass (BORO 3.3)
- Restricted Item – EUD Required: For flask sizes 500 mL or larger, an End User Declaration (EUD) must be completed. A valid photo ID (such as a Passport, Driver Licence, or Proof of Age Card) is also required. Orders will not be shipped until all documentation is received and approved.
- Flat base ensures stable heating on hotplates
- Socket joint allows secure glassware connections
- Short neck saves space in compact lab setups
- Ideal for distillation, reflux, and chemical reactions
- Used in teaching, research, and pharmaceutical labs
- Made from LabChoice BORO 3.3 glass – High quality
From AUD 8.00 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Boiling Flask Round Bottom Four Neck Jointed BORO 3.3 Glass
- Restricted Item – EUD Required: For flask sizes 500 mL or larger, an End User Declaration (EUD) must be completed. A valid photo ID (such as a Passport, Driver Licence, or Proof of Age Card) is also required. Orders will not be shipped until all documentation is received and approved.
- High clarity BORO 3.3 glass supports stable, even heating for reaction work
- Four jointed necks allow simultaneous addition, monitoring and gas handling
- Secure ground joints ensure leak resistant connections with lab apparatus
- Excellent chemical and thermal resistance for synthesis, reflux and distillation
- Trusted in research labs and universities for multi step experimental workflows
- Made from LabChoice BORO 3.3 glass – High quality
From AUD 35.90 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Boiling Flask Round Bottom, Socket Joint, Short Neck, Borosilicate Glass (BORO 3.3)
- Round bottom boiling flask for heating, boiling and reaction workflows
- Short neck design supports compact glassware assembly setups
- Socket joint connection for use with compatible jointed glassware
- Made from BORO 3.3 borosilicate glass for laboratory use
- Suitable for controlled heating applications in chemistry laboratories
- Smooth round bottom shape supports even heat distribution during boiling
- Clear glass construction allows easy visual monitoring of contents
- Practical choice for distillation, reflux and general laboratory heating setups
From AUD 5.90 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Boiling Flask, Flat Bottom, Borosilicate Glass (BORO 3.3)
- Flat bottom ensures stable placement on surfaces
- Designed for uniform heating and boiling tasks
- Ideal for distillation, reflux, and sample prep
- Used in chemistry labs, schools, and industry
- Preferred for durability and thermal resistance
- Made from LabChoice BORO 3.3 glass – High quality
From AUD 2.30 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Boiling Flask, Round Bottom, Borosilicate Glass (BORO 3.3)
- Round bottom supports uniform heating distribution
- Ideal for distillation, reflux, and chemical synthesis
- Requires support ring or heating mantle for use
- Used in organic chemistry, teaching, and research
- Trusted by laboratories across Australia
- Made from LabChoice BORO 3.3 glass – High quality
From AUD 2.60 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Borosilicate Gas Jars with Ground Flange
- Gas jar range for laboratory and educational use
- Made from borosilicate glass
- Designed for collecting gas from experiments
- Ground flange supports use with compatible gas jar covers
- Available in 15 × 5 cm and 20 × 5 cm size options
- Suitable for school chemistry and general science demonstrations
- Useful for gas collection, observation and temporary containment activities
- Clear glass supports visibility during experiments
- Confirm cover fit, gas compatibility and experiment method before use
- Use under appropriate laboratory or teacher supervision
From AUD 21.50 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Borosilicate Glass Crystallizing Dishes with Spout
- Borosilicate glass crystallizing dish range with spout
- Wide diameter and short height support faster solution evaporation
- Suitable for recrystallization and crystal growth observation
- Available in 90 mm, 100 mm, 125 mm, 150 mm and 230 mm diameter options
- 125 mm option takes 500 mL of liquid
- 150 mm option has 750 mL capacity
- 230 mm option has 3500 mL capacity
- 230 mm option is listed as 3.3 boro glass with approximate maximum temperature of 500°C
- Not generally intended for complete evaporation of solutions
- Use under appropriate laboratory or educational supervision
From AUD 13.90 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Boss Head Clamp, 360° Rotatable Zinc for Retort Stands
- 360° rotatable boss head clamp for laboratory stand setups
- Zinc bosshead design as listed
- Suitable for retort stands and other compatible laboratory stands
- Allows attached items to be positioned at different angles
- Knob tightens to lock the selected position
- Useful for supporting compatible clamps and accessories
- Can assist with positioning burettes, thermometers and glassware
- Easy to assemble and disassemble as listed
- Robust and durable construction as listed
- Practical accessory for school, university and research laboratories
- Confirm rod size, clamp fit and load suitability before use
- Use under appropriate laboratory or educational supervision
AUD 26.90 (Ex GST)
Boss Head Clamp, Jumbo Heavy Duty for up to 25 mm Rod
- Boss Head Clamp, Jumbo Heavy Duty for laboratory support assemblies
- Heavy-duty design for larger retort stand setups
- Made from die-cast iron as listed
- Painted black finish as listed
- Screw and block style connection for secure clamping
- Holds rods up to 25 mm as listed
- Suitable for retort stands and condenser clamps
- Useful for supporting compatible laboratory apparatus
- Practical clamp holder for chemistry and general science setups
- Confirm rod diameter and clamp compatibility before use
- Do not overload the bosshead or support stand
- Use under appropriate laboratory or educational supervision
AUD 36.90 (Ex GST)
Bosshead, Square Aluminium with Screw for up to 16 mm Rod
- Square bosshead for retort stand and clamp assemblies
- Suitable for use with retort stands and condenser clamps
- Made from heavy-duty die-cast aluminium as listed
- Painted finish as listed
- Screw and block style connection for secure clamping
- Holds rods up to 16 mm as listed
- Useful for supporting compatible laboratory apparatus
- Suitable for school, university and teaching laboratories
- Practical accessory for chemistry and general science setups
- Confirm rod size and clamp compatibility before use
- Do not overload the bosshead or support stand
- Use under appropriate laboratory or educational supervision
AUD 11.90 (Ex GST)
Bosshead, Zinc Powder-Coated with Screw, Holds up to 16 mm Rod
- Zinc powder coated bosshead for laboratory support setups
- Designed for use with retort stands and support rods
- Fits rods up to 16 mm as listed
- Adjustable screws allow secure positioning
- Provides a strong connection for compatible clamp assemblies
- Useful with condenser clamps and general apparatus supports
- Powder coated finish helps resist corrosion and wear as listed
- Suitable for school, university and teaching laboratories
- Practical accessory for chemistry and general science setups
- Confirm rod diameter and clamp compatibility before use
- Do not overload the bosshead or support stand
- Use under appropriate laboratory or educational supervision
AUD 9.08 (Ex GST)
Botanical Dicot Stem T.S. and L.S. Teaching Model, Sunflower
- Botanical teaching model for dicot stem study
- Represents sunflower dicot stem structure
- Shows transverse section and longitudinal section views
- Suitable for plant anatomy and botany demonstrations
- Useful for comparing internal stem tissue organisation
- Supports classroom teaching of dicot stem features
- Practical visual aid for biology and microscopy lessons
- Suitable for school, university and teaching laboratory use
- Supplied as the teaching model only
- Use under appropriate laboratory or educational supervision
AUD 249.50 (Ex GST)
Botanical Leaf Anatomy Teaching Model
- Botanical teaching model for leaf anatomy study
- Suitable for plant biology and botany demonstrations
- Helps students visualise internal leaf structure
- Useful for teaching plant tissue organisation
- Size listed as approximately 250 × 300 mm
- Practical visual aid for biology and microscopy lessons
- Suitable for school, university and teaching laboratory use
- Supports classroom discussion alongside diagrams and microscope work
- Supplied as the leaf anatomy teaching model only
- Use under appropriate laboratory or educational supervision
AUD 249.50 (Ex GST)
Botanical Monocot Stem T.S. Teaching Model
- Botanical teaching model for monocot stem study
- Represents a transverse section of a monocot stem
- Suitable for plant anatomy and botany demonstrations
- Useful for comparing monocot and dicot stem structures
- Supports classroom explanation of stem tissue organisation
- Practical visual aid for biology and microscopy lessons
- Suitable for school, university and teaching laboratories
- Helps students understand internal plant stem structure
- Supplied as the teaching model only
- Use under appropriate laboratory or educational supervision
AUD 249.50 (Ex GST)
Botanical Typical Flower Teaching Model, Self Assembly
- Botanical teaching model for typical flower study
- Self assembly format for classroom preparation
- Suitable for plant anatomy and botany demonstrations
- Useful for teaching flower structure and plant reproduction
- Helps students visualise flower parts in a larger model format
- Practical visual aid for biology and general science lessons
- Suitable for school, university and teaching laboratory use
- Supports classroom discussion alongside diagrams and microscope work
- Supplied as the teaching model only
- Use under appropriate laboratory or educational supervision
AUD 99.90 (Ex GST)
Botanical Typical Plant Cell Teaching Model
- Botanical teaching model for typical plant cell study
- Suitable for plant biology and cell structure demonstrations
- Made from PVC material
- Size listed as 42 × 30 × 10 cm
- Net weight listed as 2.1 kg
- Useful for teaching plant cell organisation and structure
- Practical visual aid for biology and microscopy lessons
- Suitable for school, university and teaching laboratory use
- Supports classroom discussion alongside diagrams and microscope work
- Supplied as the plant cell model only
AUD 104.90 (Ex GST)
Bottle Top Dispensers, Autoclavable Adjustable Volume ISO 8655 Certified
- Research Range bottle-top dispensers for accurate laboratory reagent dispensing
- Available in six adjustable volume ranges from 0.25–2.5 mL to 10–100 mL
- Research models use PTFE, FEP and borosilicate glass in the stated wetted components
- Smooth plunger movement supports controlled dispensing of compatible liquid reagents
- Locking rocker switch allows convenient volume adjustment during laboratory procedures
- Safety discharge system and protective nozzle cap help reduce unintended liquid release
- Standard 30 mm bottle thread with adapter options ranging from 28 mm to 45 mm
- Autoclavable at 121°C and 15 psi, following the manufacturer's disassembly instructions
- Individually calibrated to ISO 8655 requirements, with a calibration certificate supplied
From AUD 518.50 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Bottle Vortex Connector, Tornado and Fluid Dynamics Demonstration
- Vortex tube connector for tornado-in-a-bottle demonstrations
- Designed to join two compatible plastic soda bottles
- Demonstrates swirling vortex formation using water
- Useful for teaching fluid motion and vortex effect
- Supports classroom tornado race activities
- Can be used to compare liquids of different viscosities
- Suitable for school, university and STEM teaching demonstrations
- Simple hands-on apparatus for water and fluid science lessons
- Bottles are not included
- Confirm bottle thread compatibility before use
- Do not over-tighten or use damaged bottles
- Use under appropriate laboratory or educational supervision
AUD 6.50 (Ex GST)
Boyle’s Law High Pressure Air Pump, Plastic
- Spare high pressure air pump for compatible Boyle’s Law apparatus
- Designed for Boyle’s Law high pressure type equipment
- Plastic construction as listed
- Can be pumped by hand as listed
- Supports approved pressure and volume gas law experiments
- Practical spare or replacement pump for existing apparatus
- Suitable for school, university and teaching laboratory use
- Useful for classroom Boyle’s Law demonstrations
- Confirm apparatus and connection compatibility before ordering
- Air pump only, Boyle’s Law apparatus is not included
- Check fittings and seals before pressurising
- Use under appropriate laboratory or educational supervision
AUD 52.90 (Ex GST)
Boyle’s Law High Pressure Coloured Fluid Bottle
- Coloured fluid for Boyle’s Law high pressure apparatus
- Supplied in bottle form as listed
- Enough fluid for one loading as listed
- Designed for compatible Boyle’s Law high pressure equipment
- Supports gas law pressure and volume demonstrations
- Useful for school, university and teaching laboratory use
- Practical refill or replacement fluid for existing apparatus
- Helps improve visibility during approved Boyle’s Law experiments
- Confirm apparatus compatibility before ordering
- Fluid only, Boyle’s Law apparatus is not included
- Wear suitable PPE and follow approved handling procedures
- Use under appropriate laboratory or educational supervision
AUD 21.90 (Ex GST)
Boyle’s Law High Pressure Metal Set O-Rings, Set of 8
- O-ring set for compatible Boyle’s Law high pressure metal set
- Supplied as a set of 8 O-rings
- Suitable for compatible pot and sealing locations as listed
- Practical spare or replacement sealing part
- Supports maintenance of Boyle’s Law high pressure apparatus
- Useful for school, university and teaching laboratory use
- Helps maintain correct sealing in approved apparatus setups
- Confirm apparatus model and O-ring fit before ordering
- O-rings only, Boyle’s Law apparatus is not included
- Do not use damaged, hardened or incorrectly sized O-rings
- Check seals before pressurising the apparatus
- Use under appropriate laboratory or educational supervision
AUD 13.50 (Ex GST)
Boyle’s Law High Pressure Spare Glass Tubes
- Spare heavy walled glass tubes for compatible Boyle’s Law high pressure apparatus
- Available for later model high pressure Boyle’s Law equipment
- Later model tube is open at both ends
- Later model tube size listed as 12 mm OD × 649 mm length
- Later model tube has 2.2 mm wall thickness
- Later model tube has flamed ends for smooth edges
- Available for early model high pressure Boyle’s Law equipment
- Early model tube has closed end design
- Early model tube size listed as 12 mm OD × 650 mm length
- Practical spare or replacement tube for Boyle’s Law apparatus maintenance
- Confirm model compatibility before ordering
- Use under appropriate laboratory or educational supervision
From AUD 34.90 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Boyle’s Law Syringe Apparatus
- Syringe type Boyle’s Law apparatus for classroom gas law demonstrations
- Uses a commercial plastic syringe to show pressure and volume relationship
- Weights are placed on the system to compress the gas to selected volumes
- Volume change is observed through plunger movement on the syringe
- Convenient and low-cost apparatus for introductory physics and chemistry lessons
- Approximate results are expected due to friction losses in the syringe system
- Suitable for supervised laboratory and educational use
AUD 68.50 (Ex GST)
didn't see what you are looking for ?
We’ll source it or make it for you. LabChoice supports your research every step.