Unmounted Colour Filter Sheets
- Unmounted acetate colour filter sheets for optics and light experiments
- Each filter sheet is cut to 100 × 100 mm square size
- Available as a 10-piece colour filter set or as individual colour sheets
- Set includes primary red, primary green, primary blue and secondary colour options
- Unmounted format suits slide holders, apertures and compatible light boxes
- Useful for colour mixing, light transmission and filter comparison demonstrations
- Suitable for laboratory and educational use under appropriate supervision
From AUD 8.90 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Urine Test Strips, Multiple Parameter, Pack of 50
- Multiple urine test strips for educational use
- Supplied as pack of 50 strips as listed
- Used for detecting glucose, protein, ketones and acidity / alkalinity in training activities
- Suitable for medical and clinical-biochemical education programs
- Designed strictly for educational environments as listed
- Not for medical, clinical or diagnostic use
- Uses measurement units similar to diagnostic-style urine test strips as listed
- Useful for teaching urinalysis principles and biochemical screening concepts
- Suitable for classroom demonstrations and student training
- Confirm colour chart and reading instructions before use
- Handle biological or simulated samples using approved hygiene procedures
- Use under appropriate laboratory or educational supervision
AUD 123.50 (Ex GST)
USB Mass Sensor SUGU-M, 520 g Capacity
- USB mass sensor for measuring mass and generating time-mass graphs through a dedicated web application
- Maximum capacity is listed as 520 g or 5.10 N
- Measures in grams and newtons with selectable unit conversion
- Dedicated web application displays real-time measurement graphs on a connected PC
- USB connection supplies both power and data transfer through the built-in 900 mm cable
- No driver installation is required for PC communication
- Can be used stand-alone when connected to USB power, even without the application
- Selectable display resolution is listed as 1 or 0.01 based on supplied specifications
- LCD display size is listed as 23 x 7 mm with 10 Hz display refresh rate
- Balance pan size is listed as 125 mm diameter for compatible sample placement
- Supported operating systems are listed as Windows 11 and ChromeOS
- Functions include selectable display resolution, unit conversion, safety lock and zero adjustment
- Sample load, measurement unit, USB power source, supported OS and application compatibility should be confirmed before use
AUD 415.00 (Ex GST)
USB Temperature Sensor SUGU-T, -40°C to 125°C
- USB temperature sensor for measuring thermal changes and generating temperature-time graphs
- Measuring range supports -40°C to +125°C
- Minimum display unit is listed as 0.1°C
- Dedicated web application displays real-time measurement graphs on a connected PC
- USB connection supplies both power and data transfer through the 1 m cable
- Can operate as a stand-alone device when connected to any USB power source
- Detachable stainless steel metal sheath supports different temperature measurement workflows
- Metal sheath size is listed as Ø4 x 155 mm
- Remove the metal sheath when measuring surface temperature or ambient air temperature
- LCD display size is listed as 23 x 7 mm with 10 Hz display refresh rate
- Supported operating systems are listed as Windows 11 and ChromeOS
- Suitable for temperature-time graphing, thermal change observation, science experiments and laboratory teaching workflows
- Sensor placement, sheath use, USB power source, supported OS and application compatibility should be confirmed before use
AUD 184.00 (Ex GST)
UV LED Torch for Laboratory Inspection and Detection
- UV LED torch for laboratory and educational demonstrations
- UV wavelength listed as 395 nm
- Power listed as 3 W
- Uses LED lamp beads as listed
- Operates with 3 × AAA batteries
- Batteries are not included
- One-touch switch for simple operation
- Aluminium alloy body as listed
- Size listed as 12.3 × 3.2 cm
- No white light as listed
- Avoid direct eye and skin exposure to UV light
- Use under appropriate laboratory or educational supervision
AUD 24.90 (Ex GST)
UV-Vis Quartz Cuvette with Lid for Spectrophotometry - Pack of 2 Pcs
- UV-Vis quartz cuvette with lid for spectrophotometry applications
- Suitable for absorbance, transmittance and concentration measurements
- Optical quartz construction supports UV and visible wavelength analysis
- 10 mm path length for standard spectrophotometer testing
- Lid helps reduce evaporation, dust exposure and sample contamination
- Ideal for chemical, biological, water, environmental and QC sample testing
- Suitable for research, education, pharmaceutical and laboratory analysis workflows
AUD 119.90 (Ex GST)
Vacuum Adapter with PTFE Stopcock and Right-Angle Connection, BORO 3.3 Glass
- Vacuum adapter manufactured from BORO 3.3 glass for compatible laboratory applications
- Features a right-angle 90° connection for integration into laboratory vacuum systems
- Integrated PTFE stopcock provides manual control of gas flow through the adapter
- Features one male ground glass cone with ASTM-size 19/22 joint configuration
- Borosilicate 3.3 glass offers chemical resistance and low thermal expansion during use
- PTFE stopcock key offers chemical resistance for handling compatible laboratory gases
- Right-angle design supports convenient connections within laboratory glassware assemblies
- Suitable for compatible vacuum experiments, gas transfer and chemical laboratory setups
- Supplied individually, with one vacuum adapter and integrated PTFE stopcock per pack
Vacuum Adapter with PTFE Stopcock and Straight Connection, BORO 3.3 Glass
- Vacuum adapter manufactured from BORO 3.3 glass for compatible laboratory applications
- Features a straight connection for integration into laboratory vacuum and glassware systems
- Integrated PTFE stopcock provides manual control of gas flow through the adapter
- Available with 14/20 and 24/40 male ground glass cone connections
- Borosilicate 3.3 glass offers chemical resistance and low thermal expansion during use
- PTFE stopcock key provides chemical resistance for handling compatible laboratory gases
- Standard taper ground glass cones connect with appropriately matched laboratory glassware
- Suitable for laboratory vacuum experiments, gas transfer and chemical research applications
- Supplied individually, with one vacuum adapter and integrated PTFE stopcock per pack
Vacuum Cold Trap for Laboratory Vapour Capture, BORO 3.3 Glass - Each
- Vacuum cold trap for capturing vapours in laboratory systems.
- Made from BORO 3.3 glass for chemical and thermal resistance.
- Helps protect vacuum pumps from solvent vapour contamination.
- Suitable for distillation, evaporation and vacuum applications.
- Clear glass body supports easy visual monitoring during use.
- Designed for chemistry, research and teaching laboratories.
From AUD 129.90 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Vacuum Desiccator Transparent Polycarbonate, Durable, Clear & Airtight
- Crystal-clear polycarbonate chamber for visibility
- Durable design ideal for vacuum applications
- Airtight seal ensures effective moisture removal
- Available in multiple sizes: 150–300 mm
- Used in storage, drying, and desiccation workflows
From AUD 133.00 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Vacuum Desiccator, Polypropylene, Durable, Transparent & Chemical Resistant, High Quality
- Transparent polypropylene body ensures full visibility
- Designed for vacuum and moisture-sensitive storage
- Robust and chemical-resistant for long-term use
- Silicone gasket ensures airtight vacuum seal
- Available in multiple sizes for lab flexibility
- Supplied by LabChoice Australia – High performance
From AUD 107.00 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Vacuum Surface Plate for Bell Jar and Vacuum Experiments
- Vacuum surface plate for bell jar demonstrations
- IEC surface plate as listed
- Flat plate design for bench-top use
- Diameter listed as 200 mm
- Includes 3 small pads designed to rest on the work bench
- Designed to carry and seal to a bell jar or similar vessel
- Useful for creating a vacuum demonstration setup
- Suitable for bell-in-vacuum experiments
- Practical accessory for school and university physics laboratories
- Confirm bell jar size and sealing compatibility before use
- Vacuum pump and bell jar are not included unless specified
- Use under appropriate laboratory or educational supervision
AUD 272.50 (Ex GST)
Vacuum Trap Gas Washing Bottle, BORO 3.3 Glass
- BORO 3.3 glass supports chemical resistance and laboratory durability
- Helps reduce liquid carryover, backflow, and contamination risk
- Clear glass body allows easy viewing of liquid level and bubbling action
- Suitable for vacuum-assisted filtration, aspiration, and gas handling setups
- Useful for schools, universities, research, QC, and industrial laboratories
- Suitable for Australian laboratories requiring reliable gas washing glassware
From AUD 99.90 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Variable AC/DC Power Supply, 0 to 25 V, Digital Voltmeters
- Variable AC/DC power supply for general laboratory use
- Smooth voltage adjustment from 0 to 25 V
- Provides both AC and DC output options
- Current rating listed as 10/6 A, depending on output mode
- Dual digital voltmeters monitor AC and DC output voltages simultaneously
- Large illuminated digits support clear voltage reading
- Separate 4 mm socket head spin-free terminals for AC and DC outputs
- Robust and compact design for teaching and laboratory benches
- Suitable for physics, electrical circuits and low-voltage experiments
- Use under appropriate teacher or laboratory supervision
AUD 1,040.50 (Ex GST)
Variable High Voltage Power Supply, 0 to 500 V DC / 50 mA
- Variable high voltage power supply for laboratory and education use
- High voltage DC output listed as 0 to 500 V DC
- High voltage AC output listed as 0 to 300 V AC
- Maximum high voltage output current listed as 50 mA
- Includes digital meter for output monitoring
- Low voltage outputs listed as 2 × 6.3 V AC at 4 A
- 6.3 V AC outputs are normally used for electron tube heater applications
- Electronic overload trip protection
- Overload is reset by turning off the high voltage output
- Suitable for supervised physics, electronics and electron tube demonstrations
AUD 742.50 (Ex GST)
Variable Speed Air Source for Air Table and Air Track
- Variable speed air source for laboratory and educational use
- Designed for linear Air Tracks and Air Tables
- IEC designed air blower as listed
- Mains operated, 240 V AC as listed
- Adjustable speed allows airflow control
- Lower speed operation can reduce noise as listed
- Compact air blower format for classroom use
- Air is drawn from the upper face below the carry handle
- Intake position helps reduce rubbish being sucked in from the floor
- Strainers help stop unwanted particles entering the blower or outlet
- Supplied complete with flexible hose as listed
- Use under appropriate laboratory or educational supervision
AUD 409.90 (Ex GST)
Save 25%
Variable Speed LCD Digital Tube Roller, 6-Roller Type
- LCD displays speed and time clearly for convenient monitoring during routine operation.
- Variable-speed rocking and rolling provide gentle, consistent mixing for laboratory tubes and samples.
- Adjustable speed range from 10 to 70 rpm supports controlled sample processing.
- Six rollers support efficient mixing, straightforward tube handling and easy cleaning.
- Quiet, maintenance-free brushless DC motor supports reliable operation during extended laboratory use.
- Compatible with cold rooms and incubators for flexible daily temperature-controlled laboratory workflows.
AUD 790.00 (Ex GST)
Variable Speed Tube Rotator, Digital Display Multi Angle Up to 40 rpm
- Variable speed tube rotator for controlled sample mixing in routine laboratory workflows
- Digital display supports clear speed setting and operating visibility
- Rotation speed range from 10 to 40 rpm for gentle tube mixing
- Interchangeable rotisserie paddles support multiple tube sizes in one compact unit
- Paddle angles can be independently adjusted from 0 to 90 degrees
- Back and forth oscillation every 40 degrees helps improve liquid mixing performance
- Compact plug and play design with quiet maintenance-free motor for bench use
AUD 603.90 (Ex GST)
Variable Speed Vortex Mixer, up to 2700 rpm
- Variable speed vortex mixer for single tube mixing workflows
- Suitable for most test tubes up to 28 mm diameter
- Speed control range listed from 200 to 2700 rpm
- Manual mode activates when downward pressure is applied to the tube
- Automatic mode supports continuous operation
- Variable speed control supports gentle mixing through to vigorous vortex action
- Silicone mixing cup supports practical tube positioning during use
- Counterbalanced drive system supports quiet and smooth operation
- Power requirement listed as 240 V AC, 20 W
- Compact dimensions listed as H135 × D160 × W125 mm
AUD 542.00 (Ex GST)
Vertical Pipette Stand, Polypropylene, 28 Place
- PolyLab Vertical Pipette Stand for laboratory pipette storage and organisation
- Holds up to 28 compatible laboratory pipettes in an upright position
- Accommodates pipettes with diameters up to 14 mm
- Features a 375 mm long polypropylene-coated support rod
- Heavy base provides stability during routine laboratory use
- Adjustable discs help maintain proper pipette positioning and alignment
- Corrosion-resistant polypropylene components for practical laboratory handling
- Vertical design keeps pipettes organised and conveniently accessible
- Helps reduce direct contact between pipettes and laboratory benchtops
- Suitable for school, university, research, chemistry and analytical laboratories
AUD 29.50 (Ex GST)
Vertical Splash Heads Adapter for Distillation Assemblies, BORO 3.3 Glass
- Restricted Item – EUD Required: an End User Declaration (EUD) must be completed. A valid photo ID (such as a Passport, Driver Licence, or Proof of Age Card) is also required. Orders will not be shipped until all documentation is received and approved.
- Designed to reduce splashing and liquid carryover during distillation
- Improves vapour control and protects condensers from contamination
- Suitable for standard laboratory distillation and reflux assemblies
- Provides stable vertical alignment within glassware setups
- Ideal for teaching, research, and industrial laboratory use
- Made from BORO 3.3 borosilicate glass for high thermal and chemical resistance
- Supplied by LabChoice Australia for consistent laboratory performance
From AUD 21.90 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Very Low Frequency Oscillator, Sine Generator
- Very low frequency oscillator for laboratory and educational use
- IEC oscillator as listed
- Provides 0.1 Hz sine wave output
- One full sine wave cycle takes 10 seconds
- Output listed as 15 V peak-to-peak
- Output current listed as up to 5 mA
- Frequency accuracy listed as approximately ±5%
- Press button stops oscillation and holds output at 7.5 V
- Synchronisation feature helps align output with an event
- Useful for phase demonstrations in inductors
- Can demonstrate bridge rectifier operation in slow motion using LEDs
- Use under appropriate laboratory or educational supervision
AUD 174.50 (Ex GST)
Vibration Generator for Chladni Plates and Resonance
- Laboratory vibration generator for mechanical wave experiments
- Produces controlled mechanical vibrations using a compatible signal generator
- Electromagnetic coil operates within a cylindrical permanent magnet
- Threaded armature extension allows attachment of vibrating accessories
- Suitable for Chladni's figures and resonance demonstrations
- Strong base and protective plastic enclosure for laboratory use
- Coil and magnet assembly protected against foreign particle entry
- Specially designed coil system helps minimise overheating at rated operation
- Pair of 4 mm shielded sockets for electrical input
- Top-mounted shaft provides oscillating mechanical output
- Shaft-locking mechanism protects the apparatus during storage and transportation
- Built-in fuse provides electrical protection
AUD 174.50 (Ex GST)
Victor Meyer Apparatus for Molecular Weight Determination
- Victor Meyer apparatus for laboratory and educational use
- Standard method for determining molecular weight of volatile liquids as listed
- Suitable for chemistry demonstrations and practical experiments
- Used with compatible volatile liquid samples
- Supports teaching of vapour displacement and molar mass concepts
- Carton size listed as 73 × 22 × 8 cm
- Carton weight listed as 1 kg
- Fragile glass apparatus as listed
- Requires careful handling, setup and storage
- Confirm included components before ordering
- Heating source and chemicals are not included unless specified
- Use under appropriate laboratory or educational supervision
AUD 54.90 (Ex GST)
Vigreux Fractionating Distillation Column, Borosilicate Glass (BORO 3.3)
- Restricted Item – EUD Required: For condensers with B19 ground joints or larger, an End User Declaration (EUD) must be completed. A valid photo ID (such as a Passport, Driver Licence, or Proof of Age Card) is also required. Orders will not be shipped until all documentation is received and approved.
- High-efficiency design for precise fractional distillation
- Uniform indentations ensure maximum vapour–liquid contact
- Crafted from durable BORO 3.3 borosilicate glass for heat and chemical resistance
- Ideal for purification, solvent recovery, and organic synthesis applications
- Compatible with standard ground-glass joints for easy system integration
- Made and supplied by LabChoice Australia – trusted labware quality
From AUD 37.50 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Viscometer Holding Clamp for Glass Viscometers
- Laboratory holder for compatible glass viscometers
- Designed to support viscometers during viscosity testing
- Helps keep the viscometer positioned during approved methods
- Suitable for use with compatible viscosity bath setups
- Adjustable screw mechanism visible on the holder
- Useful for student, training and laboratory applications
- Supports safer handling of delicate viscometer glassware
- Helps reduce movement during filling, timing and measurement
- Suitable for school, university and general laboratory use
- Confirm viscometer type and bath compatibility before ordering
- Holder only, viscometer is not included unless specified separately
- Use under appropriate laboratory or educational supervision
Viscometer, Cannon-Fenske Type, for Transparent Liquids, BS/IP/CF, BORO 3.3 Glass
- Cannon-Fenske type viscometers for transparent liquids
- BS/IP/CF pattern glass viscometers
- Supplied without constant certificate
- Made from 3.3 borosilicate glass
- Autoclavable glass construction
- Suitable for viscosity and flow time experiments
- Available in sizes 25, 50, 100, 150, 200, 300, 350, 400, 450, 500 and 600
- Listed viscosity ranges from 0.5 to 20,000 mm²/sec
- Supplied as 1 piece per pack
- Useful for laboratory, student and training applications
- Handle carefully as precision laboratory glassware
- Confirm size, viscosity range and method requirements before ordering
Viscometer, Cannon-Fenske U-Tube Type, BORO 3.3 Glass, Calibrated at 40°C
- Cannon-Fenske U-tube viscometers for transparent liquids
- Supplied with constant certificate
- Listed as calibrated at 40°C
- Made from 3.3 borosilicate glass
- Autoclavable glass construction
- Suitable for transparent Newtonian liquids
- Commonly used for petroleum products and lubricants
- Listed for measurement according to ASTM D445 and ISO 3104
- Specifications listed as conforming to ASTM D446 and ISO 3105
- Available in sizes 25, 50, 75, 100, 150, 200, 300, 350, 400, 450, 500 and 600
- Minimum sample volume listed as 7 mL
- Use under appropriate laboratory or educational supervision
Viscometer, Cannon-Fenske, for Opaque Liquids, BORO 3.3 Glass
- Cannon-Fenske type viscometers for opaque liquids
- Listed for ASTM D445 viscosity testing applications
- Supplied without constant certificate
- Made from 3.3 borosilicate glass
- Autoclavable glass construction
- Suitable for viscosity and flow time experiments
- Available in sizes 100, 150, 200, 300, 350, 400, 450, 500 and 600
- Listed viscosity ranges from 3 to 20,000 mm²/sec
- Supplied as 1 piece per pack
- Useful for laboratory, student and training applications
- Handle carefully as precision laboratory glassware
- Confirm size, viscosity range and method requirements before ordering
Viscometer, Cannon-Fenske, for Opaque Liquids, BORO 3.3 Glass, Calibrated at 40°C
- Cannon-Fenske C/F viscometers for opaque liquids
- Supplied with constant certificate
- Listed as calibrated at 40°C
- Made from 3.3 borosilicate glass
- Autoclavable glass construction
- Suitable for dark Newtonian liquids
- Listed for kinematic viscosity measurement according to ASTM D445, ISO 3104 and ASTM D2170
- Available in sizes 100, 150, 200, 300, 350, 400, 450, 500 and 600
- Listed viscosity ranges from 3 to 20,000 mm²/sec
- Minimum sample volume listed as 12 mL
- Supplied as 1 piece per pack
- Use under appropriate laboratory or educational supervision
Viscometer, Cannon-Manning Type, BORO 3.3 Glass
- Cannon-Manning viscometers for laboratory and educational use
- Supplied with certificate
- Made from 3.3 borosilicate glass
- Autoclavable glass construction
- Suitable for viscosity and flow time experiments
- Available in sizes 11, 12 and 13
- Supplied as 1 piece per pack
- Useful for laboratory, student and training applications
- Suitable for compatible liquid viscosity demonstrations
- Handle carefully as precision laboratory glassware
- Confirm certificate type and method requirements before ordering
- Use under appropriate laboratory or educational supervision
Viscometer, Suspended Level, BORO 3.3 Glass, Calibrated at 40°C
- Suspended level viscometers for kinematic viscosity measurement
- Supplied with constant certificate
- Listed as calibrated at 40°C
- Made from 3.3 borosilicate glass
- Autoclavable glass construction
- Suitable for transparent Newtonian liquids
- Listed for measurement according to ASTM D445 and ISO 3104
- Specifications listed as conforming to ASTM D446 and ISO 3105
- Available in sizes 1, 1A, 2, 2A, 3, 3A, 4, 4A and 5
- Viscosity ranges listed from 2 to 100,000 mm²/sec
- Minimum sample volume listed as 11 mL
- Use under appropriate laboratory or educational supervision
didn't see what you are looking for ?
We’ll source it or make it for you. LabChoice supports your research every step.