Scale Pans with Hooks, Laboratory Weighing Unit
- Scale pans with hooks for mechanics, force and weighing demonstrations
- Suitable for hanging masses in pulley, spring and force experiments
- Traditional pans are stated as 75 mm diameter × 12 mm deep
- Available in plastic, aluminium and brass pan formats
- Strong hook is stated as the same style used in pulley sheaves
- Plastic version uses three miniature chains to connect pan to hook
- One-piece black nylon pan has integrated hook with no loose parts
From $7.90 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Schlenk Reaction Flask Single Neck with Stopcock, BORO 3.3 Glass
- High clarity borosilicate glass supports inert and moisture sensitive reactions
- Single neck design allows secure attachment of condensers, adapters or septa
- Thermal and chemical resistance suits synthesis, purification and catalyst work
- Integrated PTFE stopcock enables controlled vacuum and gas line operation
- Reliable choice for research labs, universities and advanced teaching setups
- Made from LabChoice BORO 3.3 glass – High quality
From $119.90 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Selectavolt Regulated DC Power Supply, 1.5 / 3 / 6 V
- Selectavolt regulated DC power supply for laboratory and education use
- Selectable output voltages of 1.5 V, 3 V and 6 V DC
- Output current listed as 2 A continuous or 3 A intermittent
- Smooth regulated DC output designed to simulate dry cell batteries
- Rear panel slide switch for voltage selection
- No AC output provided
- Output via 4 mm spin-free IEC terminals
- Rear 4 mm sockets permit trickle charging of compatible NiCd cells
- Suitable for school electricity, electronics and low-voltage circuit experiments
- Use under appropriate teacher or laboratory supervision
$325.90 (Ex GST)
Self-Sealing Gas Cartridge for Portable Bunsen Burner
- Self-sealing gas cartridge designed for safe and convenient use with compatible portable Bunsen burners in laboratory environments
- Coleman 250 type cartridge, code 250, ensuring compatibility with standard portable burner fittings
- Contains a balanced propane and butane gas mix for consistent and reliable flame performance
- Cartridge content stated as 220 g, suitable for extended laboratory sessions
- Approximate burn time of 2.75 to 3 hours, depending on flame intensity and usage conditions
- Classified as dangerous goods, with freight surcharges applied by carriers
- Intended strictly for laboratory or educational use under appropriate supervision
$18.90 (Ex GST)
Separating Funnel Kit Polypropylene with Stopcock, High Quality
- Polypropylene separatory funnel kit designed for safe liquid–liquid separation in routine laboratory work
- Integrated polypropylene stopcock provides smooth, controlled flow with reliable leak resistance
- Lightweight, impact resistant construction reduces breakage risk compared to glass funnels
- High chemical resistance to acids, alkalis, and most organic solvents
- Easy to clean and maintain, suitable for repeated laboratory use
- Ideal for educational laboratories, research facilities, quality control, and industrial applications
- High quality lab plasticware supplied by LabChoice Australia
From $49.90 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Separating Funnel Kit PTFE Stopcock with SS Retort Ring, BORO 3.3 Glass
- Complete separatory funnel kit designed for efficient liquid liquid extraction and phase separation
- Precision PTFE stopcock provides smooth, leak free flow control and excellent chemical resistance
- Clear body allows easy visual identification of phase boundaries during separation
- Secure stopper and stopcock assembly supports safe handling of volatile or corrosive solvents
- Suitable for teaching labs, research laboratories, and routine analytical workflows
- Made from LabChoice BORO 3.3 glass – High quality
From $69.90 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Separating Funnel, PTFE Key Stopcock, Interchangeable Stopper, Pear Shape, Plain Stem, Borosilicate Glass (BORO 3.3)
- Restricted Item – EUD Required: For flask sizes 500 mL or larger, an End User Declaration (EUD) must be completed. A valid photo ID (such as a Passport, Driver Licence, or Proof of Age Card) is also required. Orders will not be shipped until all documentation is received and approved.
- Pear-shaped body enables efficient phase separation
- PTFE key stopcock provides smooth solvent control
- Plain stem allows accurate, dropwise dispensing
- Interchangeable stopper ensures secure, airtight seal
- Used in solvent extraction, chemistry, and teaching labs
- Made from LabChoice BORO 3.3 glass – High quality
From $24.70 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Serological Pipettes, Polypropylene Individually Wrapped Sterile Transfer Type
- Sterile individually wrapped serological pipettes for tissue culture and bacterial culture workflows
- Made from high clarity polystyrene for clear sample visibility during aspiration and dispensing
- Colour-coded bands support quick identification of different pipette volumes
- Negative graduations support extra volume handling during liquid transfer tasks
- E-beam sterilised with polyolefin fibre filter to help reduce contamination risk
- Non-pyrogenic, non-cytotoxic, non-haemolytic, DNase free and RNase free
- Available in 1 mL, 2 mL, 5 mL, 10 mL, 25 mL and 50 mL options
From $80.90 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Short Path Distillation Heads BORO 3.3
- Restricted Item – An End User Declaration (EUD) must be completed. A valid photo ID (such as a Passport, Driver Licence, or Proof of Age Card) is also required. Orders will not be shipped until all documentation is received and approved.
- Short vapour pathway for fast, efficient separation under vacuum
- Integrated condenser for rapid cooling of heat sensitive compounds
- Made from BORO 3.3 glass compliant with ISO 3585 and ASTM E438
- Ideal for micro scale distillation, purification and high value compound recovery
- Precision ground joints provide secure, leak free system connections
- Widely used in research labs, essential oil work and advanced chemical processing
Silicone Beaker Covers, Reusable - Pack of 10
- Reusable silicone beaker covers for laboratory and educational handling tasks
- Supplied in packs of 10 to support repeated use and laboratory stock control
- Helps reduce spillages during short handling, bench movement and temporary covering
- Helps protect beaker contents from dust and routine bench contamination exposure
- Size options include XSmall, Small 9 cm, Medium 11 cm and Large 14 cm
- Flexible silicone design supports practical fitting over compatible beaker rims
- Suitable for laboratory and educational use under appropriate supervision
From $22.50 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Silicone Stoppers, Lab-Grade High Quality
- Solid silicone stoppers for compatible laboratory glassware and conical flasks
- High-quality silicone material supports routine laboratory sealing applications
- Designed for high-temperature and chemical-resistant laboratory use
- Tapered stopper profile supports practical fitting into compatible flask necks
- Available in two size options for 250/500 mL and 1000/2000 mL conical flasks
- Top and bottom outside diameters are listed with ±2 mm tolerance
- Suitable for laboratory and educational use under appropriate supervision
From $9.90 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Silicone Tubing, Laboratory Grade, High Quality
- Flexible silicone tubing for general liquid and gas transfer in laboratories, schools, and industry
- Smooth bore for consistent flow, easy rinsing, and reduced residue build-up
- Suitable for water, buffers, media, and many aqueous solutions, plus air and inert gas lines
- Stays pliable across a wide temperature range, helps resist kinking in tight bends
- Common choice for peristaltic pumps and circulation lines, select correct ID and wall thickness
- Typically autoclave compatible for routine sterilisation and reuse
- Available in multiple sizes to suit standard barbs, nozzles, and lab connections
- Check chemical compatibility for oils and organic solvents, LabChoice Australia can advise on selection
From $10.90 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Simple Copper–Constantan Thermocouple, 200 mm Length
- T-type thermocouple made from copper and constantan thermocouple cable
- 200 mm cable length supports simple integration into teaching and laboratory setups
- Welded junction tip provides direct contact temperature sensing
- High-temperature glass insulation supports use near heated surfaces
- Heated junction produces a small thermoelectric voltage related to temperature
- Output can be used with compatible temperature meters or controllers
- Suitable for basic heat studies, thermal experiments and temperature feedback setups
$9.90 (Ex GST)
Simple Wheel and Axle Pulley Set, Two Sizes Included 150 mm and 75 mm
- Wheel and axle apparatus for mechanical ratio and pulley demonstrations
- Includes two fixed pulley diameters: 150 mm and 75 mm
- Pulleys are made from strong 5-ply timber sealed against moisture
- Dual-diameter design supports comparison of radius, effort and load
- Central bearing allows free rotation on a strong 10 mm diameter rod
- Suitable for use with compatible cords and slotted weights
- Designed for supervised mechanics and classroom physics experiments
$89.90 (Ex GST)
Single Edge Razor Blades, Pack of 100
- Single edge razor blades for routine laboratory cutting tasks
- Supplied as a pack of 100 blades for classroom and lab stock use
- Suitable for trimming, slicing, scraping and preparation work
- Single edge format supports controlled manual cutting applications
- Useful for biology, microscopy, preparation room and teaching workflows
- Sharp blade product, use only with appropriate supervision and PPE
- Intended for laboratory and educational use, not personal grooming use
$27.50 (Ex GST)
Single Range Student Meters For Circuit
- Single range student meters for classroom circuit current measurement
- Designed to reduce scale confusion during practical electricity lessons
- Available across DC microamp, DC milliamp, AC amp and DC amp ranges
- Suitable for basic circuit work, current flow and component investigations
- Economical and durable design stated for repeated student handling
- Large viewing window supports clearer reading during group demonstrations
- Use within the stated range under appropriate supervision
From $43.90 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Single Range Student Volt Meters, AC and DC Voltage
- Single range student volt meters for classroom voltage measurement
- Available for AC and DC voltage experiments in teaching laboratories
- Designed to simplify reading during circuit analysis activities
- Range options include AC 0 to 25 V and DC 0 to 3 V, 0 to 10 V and 0 to 25 V
- 0 to 25 V models list scale increments of 0, 5, 10, 15, 20 and 25
- Accuracy is stated as approximately 2.0 to 2.5% for listed 0 to 25 V models
- Use within the stated voltage range under appropriate supervision
From $43.90 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Sloping Steam Distillation Heads BORO 3.3 Glass
- Restricted Item – An End User Declaration (EUD) must be completed. A valid photo ID (such as a Passport, Driver Licence, or Proof of Age Card) is also required. Orders will not be shipped until all documentation is received and approved.
- Designed for efficient steam distillation with improved condensate flow control
- Sloping head geometry helps reduce liquid hold-up and improves separation efficiency
- Suitable for essential oil extraction, organic chemistry distillation, and teaching laboratories
- Precision ground joints ensure secure, leak-resistant connections with standard lab glassware
- Durable, heat and chemical resistant construction for repeated high-temperature use
- Made from LabChoice BORO 3.3 glass – High quality, supplied by LabChoice Australia
Soxhlet Extraction Set with Allihn Condenser BORO 3.3 Glass
- Soxhlet extraction set for continuous solvent extraction of soluble compounds
- Made from BORO 3.3 borosilicate glass for chemical and thermal resistance
- Includes Allihn condenser to support efficient vapour condensation and reflux
- Suitable for extraction work in chemistry, research, education, and analytical laboratories
- Designed for controlled heating, solvent cycling, and repeatable extraction procedures
- Durable laboratory glassware construction supports reliable routine use in Australian labs
$499.90 (Ex GST)
Spare Bell for Bell Jar Experiment Kit
- Replacement bell for Bell Jar Experiment Kit
- Suitable for LC-80-MS0019-01 experiment kit
- Used for sound in vacuum demonstrations
- Bell diameter stated as 60 mm
- Overall dimensions stated as approximately 130 mm × 85 mm
- Bell jar kit, vacuum plate and pump are not included
- For laboratory or educational use under appropriate supervision
$26.50 (Ex GST)
Spare Pestles, Replacement Pestles for Glass and Porcelain Mortars
- Spare pestles for replacing damaged or misplaced mortar pestles
- Suitable for use with compatible glass and porcelain mortars
- Options listed for 100 mL, 300 mL, 500 mL and 1000 mL mortars
- Additional option listed for 60 mm glass mortar compatibility
- Pestle length is stated as approximately 100 mm across the listed options
- Supports grinding, mixing and crushing tasks in laboratory workflows
- For laboratory or educational use only under appropriate supervision
From $2.50 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Spectrum Tube EHV Unit and Tube Support, Without Tubes
- EHV power supply unit for compatible spectrum discharge tubes
- Supplied with tube support for holding different spectrum tube lengths
- Self-contained unit designed to operate from 240 V AC mains power
- Deep recessed high-voltage socket supports direct tube connection
- Stainless steel rod and sliding clamp support tube positioning
- Removable mains cable supports practical setup and storage
- High-voltage apparatus for supervised educational use only
$422.50 (Ex GST)
Spectrum Tubes 208 mm Length, Set of 6
- Set of 6 spectrum tubes for spectroscopy and discharge demonstration work
- Includes hydrogen, mercury, helium, nitrogen, neon and argon tubes
- Bright discharge supports clear classroom observation of spectral lines
- Each tube has a stated size of 208 mm overall length × 12 mm diameter
- Supplied in a foam case for organised storage and handling
- Designed for use with a compatible spectrum tube EHV power unit
- For supervised laboratory or educational use with suitable high-voltage safety
$254.90 (Ex GST)
Spring Balance Newton Meters, Cylindrical, 1 N to 100 N
- Cylindrical spring balance range for force measurement demonstrations
- Also known as Newton meters for physics and educational use
- Colour coded by range to support quick classroom identification
- Measures force in gram and Newton ranges from 100 g or 1 N to 10,000 g or 100 N
- Selected models include stated gram scale divisions for practical readings
- Suitable for basic force, weight, spring and accelerometer activities
- Designed for supervised laboratory, classroom and educational use
From $13.90 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Spring Balance Newton Meters, Plastic and Aluminium, 1 N to 50 N
- Plastic and aluminium spring balances for direct force measurement
- Also known as Newton meters for physics and educational use
- Range options cover 100 g or 1 N through to 5000 g or 50 N
- Gram division steps range from 2 g to 50 g by model
- Suitable for pulling force, load change and spring extension activities
- Useful for basic force, motion and accelerometer-style demonstrations
- Designed for supervised laboratory, classroom and practical use
From $9.50 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Square Plate Magnetic Stirrer, Brushless DC Motor, up to 1.5 L Capacity
- Compact small-footprint design with 12 V operation for mobile lab use.
- Square work plate supports up to 1.5 L stirring capacity for routine mixing.
- Holder with clamp accommodates a pH electrode or other laboratory sensor.
- PET top plate provides excellent chemical resistance for daily laboratory work.
- Colourful stickers allow simple DIY identification and workspace customisation.
- Maintenance-free brushless DC motor supports reliable and low-noise stirring.
$98.00 (Ex GST)
Stainless Steel Probe, Double Ended 14 cm Fine Point
- Double-ended stainless steel probe for routine laboratory use
- 14 cm length supports practical handling and fine manipulation
- 1.5 mm tip on each end for accurate probing and positioning
- Two-ended design allows continued use by rotating the tool
- Suitable for small sample handling, alignment and demonstration work
- Stainless steel construction provides a rigid reusable probe format
- For laboratory or educational use only under appropriate supervision
$1.90 (Ex GST)
Stainless Steel Scalpel Handles for Dissection
- Stainless steel scalpel handle range for laboratory and educational use
- Available in No. 3 and No. 4 handle options
- Material listed as AISI 410 grade stainless steel
- No. 3 handle is listed for use with #10 to #15 scalpel blades
- Provides secure blade-to-handle fit where compatible blades are used
- Reusable handle format for compatible disposable scalpel blades
- Suitable for dissection, biology teaching and laboratory preparation work
- Confirm blade compatibility before ordering or use
- Blades are not included unless specified separately
- Use only under appropriate laboratory or teacher supervision
From $4.50 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Standard Mini Rollers, 6 and 11 Roller Options
- Mini roller for liquid mixing, cell culture and hybridisation workflows
- Available in 6-roller and 11-roller configurations
- Variable roller speed from 0.5 to 80 rpm
- Suitable for benchtop, standard incubator and CO₂ incubator use
- Anti-corrosive and wear-resistant construction for humid environments
- Supports tubes and bottles up to maximum Ø120 mm
- Supplied with O-rings in two stated sizes for setup support
From $2,070.00 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Steam Distillation Kit For Oil Essential, BORO 3.3
- Steam distillation kit for extracting essential oils from botanical material using steam separation
- BORO 3.3 borosilicate glass for strong thermal performance and chemical resistance in routine lab use
- Supports clean collection of volatile oil fraction and hydrosol during distillation runs
- Suitable for teaching demonstrations, R&D trials, and small-scale essential oil workflows
- Designed for repeatable setup, easy cleaning, and reliable results across distillation cycles
From $648.90 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Straight Splash Heads Adapter for Distillation Assemblies, BORO 3.3 Glass
- Restricted Item – EUD Required: an End User Declaration (EUD) must be completed. A valid photo ID (such as a Passport, Driver Licence, or Proof of Age Card) is also required. Orders will not be shipped until all documentation is received and approved.
- Straight splash head adapter designed for efficient vapour control in distillation assemblies
- Helps prevent liquid carryover while maintaining smooth vapour flow
- Suitable for simple distillation and reflux laboratory setups
- Compatible with standard laboratory flasks and condensers
- Manufactured for thermal and chemical resistance in routine lab use
- Made from LabChoice BORO 3.3 glass – High quality, supplied by LabChoice Australia
From $40.50 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Student Flame Spectrometer for Emission and Atomic Absorption
- Student spectrometer for flame emission, atomic absorption and colourimetry
- Designed for classroom teaching, demonstration and supervised practical work
- Can be used with or without a computer for flexible lesson setup
- Includes air and gas controls for sample atomisation and burner operation
- Supplied with nebuliser, all cables and Windows-based software
- RS232 connection supports computer use with compatible systems
- Atomic absorption work normally requires a sodium light source, not supplied
$2,025.50 (Ex GST)
didn't see what you are looking for ?
We’ll source it or make it for you. LabChoice supports your research every step.