Test Tubes Round Bottom, Rimless, Heat Resistant, BORO 3.3 Glass
- Rimless edge minimizes contamination and chipping
- Round bottom supports even heating distribution
- Highly heat resistant – suitable for open flame use
- Ideal for flame sealing, boiling, and autoclaving
- Used in chemistry, biology, plant science, and TLC
- Made from LabChoice BORO 3.3 glass – High quality
From AUD 31.00 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Test Tubes with Graduation and Stopper, BORO 3.3 Glass
- Test tubes with graduation marks for easy volume reference during lab use.
- Made from BORO 3.3 borosilicate glass for reliable laboratory handling.
- Supplied with stopper to support secure sample closure when required.
- Clear glass body allows easy viewing of sample level and contents.
- Graduation markings help with routine measuring, mixing and sample preparation.
- Suitable for storage, observation and general laboratory applications.
- Designed for laboratory and educational use only.
From AUD 4.59 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Test Tubes, Round Bottom with Rim, Borosilicate Glass (BORO 3.3)
- Round bottom enables uniform heat distribution
- Rimmed edge supports safe handling and pouring
- Suitable for heating, mixing, and sample storage
- Used in teaching labs, research, and diagnostics
- Durable under flame, autoclave, and chemical exposure
- Made from LabChoice BORO 3.3 glass – High quality
From AUD 18.50 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
TH Bridge Plate, IT2400 Steam Protection
- Bridge plate for IT2400 to suit TH series immersion circulator use
- Easily removable design supports quick and easy cleaning after use
- Provides protection from steam to the connected TH unit during operation
- Required when both a TH immersion circulator and lid are being used
- No-port bridge plate version suits THx000 immersion circulator setups
- Bridge with recirculation ports is available as an alternative option
Thermal Conductivity Bars
• Four-metal thermal conductivity bars plate, copper brass aluminium steel, 200 × 50 × 6 mm.
• Beaker method, dip exposed end into hot water, 60°C or higher, observe heating.
• Thermochromic 1 cm blackish squares change transparent/brighter as heat conducts along each metal.
• Same immersion depth and timing, compare conduction speed between copper, aluminium, brass, steel.
• Hot water hazard, use precautions with 60°C+ or boiling water, supervised laboratory or education use only.
AUD 34.90 (Ex GST)
Thermometer Anti-Roll Rings, Blue Rubber, Pack of 100
- Anti-roll ring accessory for compatible laboratory thermometers
- Blue rubber construction as listed
- Helps reduce thermometer rolling on bench surfaces
- Practical accessory for school and teaching laboratory use
- Suitable for compatible glass thermometer handling workflows
- Helps improve bench organisation during practical activities
- Useful for laboratory maintenance and replacement stock
- Supplied as a pack of 100 rings
- Confirm thermometer diameter compatibility before ordering
- Anti-roll rings only, thermometers are not included
- Handle glass thermometers carefully during fitting
- Use under appropriate laboratory or educational supervision
AUD 44.90 (Ex GST)
Thermometer Cone Adapter, Borosilicate Glass with Threaded Top
- Threaded top ensures secure thermometer positioning
- Cone joint allows integration with lab apparatus
- Ideal for distillation, reflux, and temperature monitoring
- Supports airtight sealing and precise placement
- Used in teaching, research, and industrial labs
- Made from LabChoice BORO 3.3 glass – High quality
From AUD 21.00 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Thermometer Stand, 18 Place Aluminium Storage Rack with Rubber Base
- Rugged thermometer stand for laboratory thermometer storage
- Holds up to 18 standard thermometers
- Aluminium construction as listed
- Powder coated blue finish
- Rugged and sturdy design for routine laboratory use
- Protective rubber foam bottom helps protect thermometer bulbs
- Rack dimensions listed as 170 × 120 × 130 mm
- Hole diameter listed as 9.8 mm
- Suitable for standard thermometers up to 9 mm diameter
- Suitable for thermometers up to 405 mm high
- Thermometer stand only, thermometers are not included
- Use under appropriate laboratory or educational supervision
AUD 34.90 (Ex GST)
Thermostat Control Adjustable Hot Plate
- Thermostat controlled hot plate with adjustable temperature regulation
- Designed for accurate and stable laboratory heating applications
- Adjustable heat settings for flexible temperature control
- Suitable for routine sample heating, preparation, and laboratory procedures
- Durable heating surface for reliable day-to-day laboratory use
- User-friendly control system for convenient operation
- Suitable for laboratories, schools, and scientific testing environments
- Available from LabChoice Australia for Australian laboratory applications
From AUD 712.50 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Save 25%
Thermostat Heat Control with Combined Hot Plates & Magnetic Stirrer
- Thermostat heat control for regulated laboratory heating
- Hot plate and magnetic stirrer combination for heating and mixing
- Adjustable temperature control helps maintain the selected heat setting
- Variable stirring function supports routine mixing applications
- Suitable for sample preparation, solution heating, and classroom experiments
- Designed for laboratories, schools, and science teaching environments
- Practical benchtop unit for controlled heating with magnetic stirring
- Available from LabChoice Australia for Australian laboratory use
From AUD 715.00 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Thin Heating Block for 0.2 mL Tubes, 54 Holes
- Thin heating block for compatible dry bath systems, providing efficient heat transfer and stable temperature control
- Designed for 0.2 mL tubes used in molecular biology and small-volume workflows
- 54-hole capacity supports simultaneous processing of multiple samples
- Hole dimensions approximately 6.4 mm diameter × 15 mm depth for proper tube fit
- Suitable for heating, incubation and sample preparation tasks
- Ideal for research, teaching and routine laboratory use
- Confirm dry bath compatibility and tube fit before use
Thin Heating Block for 0.5 mL Tubes, 40 Holes
- Thin heating block for compatible mini dry bath and dry bath systems
- Designed for 0.5 mL tube formats
- 40-hole capacity for small-volume sample workflows
- Hole size stated as 8.2 mm diameter × 26.4 mm depth
- Supports controlled dry bath heating applications
- Suitable for temperature-controlled small-volume sample preparation
- Confirm dry bath compatibility and 0.5 mL tube fit before use
Thin Heating Block for 1.5 mL Tubes, 40 Holes
- Thin heating block for compatible mini dry bath and dry bath systems
- Designed for 1.5 mL tube formats
- 40-hole capacity for small-volume sample workflows
- Hole size stated as 11 mm diameter × 34.7 mm depth
- Supports controlled dry bath heating applications
- Suitable for temperature-controlled small-volume sample preparation
- Confirm dry bath compatibility and 1.5 mL tube fit before use
Thin Heating Block for 2 mL Tubes, 40 Holes
- Thin heating block for compatible mini dry bath and dry bath systems
- Designed for 2 mL tube formats
- 40-hole capacity for small-volume sample workflows
- Hole size stated as 11 mm diameter × 34.7 mm depth
- Supports controlled dry bath heating applications
- Suitable for temperature-controlled small-volume sample preparation
- Confirm dry bath compatibility and 2 mL tube fit before use
Thistle Funnel, BORO 3.3 Glass
- BORO 3.3 borosilicate glass thistle funnel for controlled liquid addition in lab setups
- Long stem design helps deliver liquids into flasks or apparatus with reduced splashing
- Suitable for reagent transfer in chemistry, distillation, and general laboratory work
- Clear glass construction allows easy visibility of liquid flow during use
- Good thermal and chemical resistance for routine laboratory applications
- Reusable glassware option for schools, universities, research, and industrial labs
- Easy to clean and compatible with standard wet chemistry bench procedures
AUD 8.40 (Ex GST)
Three Finger Clamp with Double Adjustable Swivel Bosshead
- Heavy duty three finger clamp provides secure, stable holding of laboratory glassware and apparatus
- Double adjustable swivel bosshead allows flexible positioning and precise angle control on retort stands
- Rubber coated jaws help improve grip and reduce risk of glass damage during clamping
- Suitable for supporting condensers, burettes, flasks, columns, and general lab assemblies
- Durable metal construction designed for repeated use in teaching, research, and industrial labs
- Ideal for distillation, reflux, filtration setups, and general bench support tasks
AUD 39.90 (Ex GST)
Three-Way Corner Mirror for Light Reflection Experiments
- Corner mirror for optics and reflection demonstrations
- Contains 3 front surfaced mirrors as listed
- Mirrors are mounted inside a plastic moulded housing
- Three mirror faces are mutually positioned at 90°
- Side size listed as 120 mm
- Demonstrates retroreflection of incident light rays
- Reflects light back towards the source over a range of incident angles
- Useful for teaching reflection, ray tracing and optical alignment
- Demonstrates the principle used in road and post reflectors
- Suitable for school, university and teaching laboratory use
- Handle front surfaced mirrors carefully to avoid scratches
- Use under appropriate laboratory or educational supervision
AUD 22.50 (Ex GST)
Three-Way Glass Adapter, Dual Parallel Necks with 45° Side Arm BORO 3.3 Glass
- Three way multiple neck adapter designed for complex laboratory reaction and distillation setups
- Two parallel necks with one angled 45° connection support simultaneous additions or monitoring
- Enables efficient integration of condensers, thermometers, dropping funnels, or gas lines
- Optimised joint orientation improves workflow access and reduces apparatus crowding
- Suitable for synthesis, reflux, distillation, and vacuum applications in research and teaching labs
- Made from LabChoice BORO 3.3 glass – High quality, supplied by LabChoice Australia
From AUD 31.90 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Timers and Counters
- Microprocessor controlled timers for physics labs, fast timing with auto ranging down to 0.1 ms resolution
- Memory capacity up to 20 readings, functions include add, average, purge and clear depending on model
- Timing modes include start stop, photogate, period and pendulum, supports common mechanics experiments
- Power options include 3 x AA battery, 12V AC/DC plug pack, and 240V AC mains, with LED or LCD displays
- Advanced models add counting and frequency modes, photogate power, dual gate timing, free fall solenoid control, and Geiger counting with adjustable tube high voltage plus audio and oscilloscope outputs
From AUD 328.90 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
TISAB Solution, Fluoride Measurement Support Solution
- TISAB solution for LAQUAtwin F-11 fluoride testing
- Designed for use with compatible fluoride measurement workflows
- Supports routine test preparation and meter use
- Suitable for LAQUAtwin F-11 applications
- Practical solution for ongoing fluoride analysis
AUD 110.00 (Ex GST)
Tissue culture (TC) Treated Cell Culture Petri Dishes
- Tissue culture (TC) treated NEST cell culture dishes for adherent cell culture workflows
- High clarity polystyrene supports microscopic cell observation
- Vacuum plasma TC treatment supports excellent cell adherence
- Numeric marks on the base help identify cell locations during observation
- Flat transparent surface supports distortion-free viewing
- Sterilised by E-Beam and described as non-pyrogenic
- Available in 35 mm, 60 mm, 100 mm and 150 mm dish sizes
From AUD 180.90 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
TM104 Stopwatch with Pouch and Lanyard, Black
- TM104 stopwatch for timing laboratory and educational activities
- Black stopwatch supplied with soft pouch and lanyard
- Runs on 1 × AA battery, included
- Stopwatch resolution listed as 1/100th of a second
- Displays lap times up to 30 minutes
- Auto restart function for lap timing
- Includes 12 or 24 hour clock display
- Date display included
- No protruding knobs to reduce breakage risk
- Supplied with desk mount
- Suitable for science, sport, classroom and laboratory timing workflows
- Use under appropriate laboratory or educational supervision
AUD 31.50 (Ex GST)
TOC Vials with Bonded Caps, BORO 5.1
- BORO 5.1 borosilicate glass construction for dependable chemical resistance and thermal stability
- Designed for TOC sample collection and handling in analytical laboratory applications
- Bonded cap format supports convenient use and helps keep cap and vial together
- Suitable for workflows where clean sample handling and consistent closure are important
- Clear vial design supports easy sample visibility and identification
- Practical for research, quality control, and water testing laboratory environments
- Reliable choice for routine TOC analysis and related sample preparation tasks
From AUD 315.50 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Top Cup for Infrared Digital Vortex Mixture
- Top Cup for Infrared Digital Vortex Mixer accessory use
- Designed for compatible infrared digital vortex mixer units
- Helps support tube or small vessel contact during mixing
- Suitable as a spare or replacement vortex mixer component
- Supports routine sample agitation and quick laboratory mixing
- Useful for labs, schools, universities and testing environments
AUD 18.50 (Ex GST)
Top Cup for Digital Vortex Mixer
- Replacement top cup for compatible digital vortex mixers
- Supports routine sample mixing and vortexing workflows
- Helps provide stable contact during mixer operation
- Useful accessory for maintaining vortex mixer performance
- Suitable for laboratory, education, and testing environments
- Supplied by LabChoice Australia for lab equipment support
AUD 18.50 (Ex GST)
Transformer 240V AC to 12V AC 12A ,Triple Output Terminals
- 220/240 V to 12 V AC transformer, supplies three separate low-voltage circuits from one mains unit.
- Total load up to 12 A across all outputs, suitable for multiple 12 V AC classroom devices.
- Three output pairs on 4 mm spin-free IEC terminals, easy wiring to three independent circuits.
- Designed to run up to three Hodson light boxes or similar 12 V AC equipment as specified.
- Fixed mains cable, non-removable lead, simple plug-in operation for lab benches and classrooms.
AUD 267.90 (Ex GST)
Tri-Mode Signal Generator, Power Supply and Amplifier
- Three-in-one teaching instrument for electronics experiments
- Includes regulated ±1.2 to 20 V DC power supply
- DC power supply output is stated as 250 mA
- Signal generator frequency range is stated as 0.1 Hz to 100 kHz
- High power signal generator output is stated as 0.5 A
- Includes audio amplifier with high and low sensitivity inputs
- Provides oscilloscope output and internal speaker
AUD 1,023.90 (Ex GST)
Triangular Prisms, Acrylic and Glass Optics Experiment Type
- Triangular prisms in acrylic and glass for optics experiments, supports refraction, dispersion and light path demonstrations
- Acrylic giant prisms listed in equilateral and 45-45-90 isosceles formats, lightweight and impact resistant for classroom use
- Glass options include 30-60-90, equilateral 60-60-60 and right angle 90-45-45 geometries, supports varied optics setups
- Double extra flint option listed 25 mm, 60 degree with RI 1.65, supports refractive material comparison work
- Choose prism material, geometry and size to match beam visibility, handling needs and experiment objectives
From AUD 6.50 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Tripod Stand Round Cast Iron, Heat-Resistant and Durable - 125 x 200 mm
- Round cast iron top for balanced support
- 125 mm surface diameter suits common labware
- 200 mm height ideal for Bunsen burner clearance
- Heat-resistant design for open flame use
- Stable steel legs ensure secure positioning
- Supplied by LabChoice Australia – Trusted quality
AUD 11.90 (Ex GST)
Tripod Stand Stainless Steel, Triangular, Stable Support for Heating Glassware, 200 mm High
- Stainless steel construction offers corrosion resistance
- Triangular top ensures balanced support for glassware
- 200 mm height suits Bunsen burner setups
- Stable tripod design prevents tipping during heating
- Ideal for chemistry, teaching, and industrial labs
- Supplied by LabChoice Australia – Trusted performance
AUD 16.50 (Ex GST)
Tripod Stand with Wire Gauze Mat Kit, Laboratory Heating Support
- Complete laboratory heating support kit including a stable metal tripod stand and wire gauze mat
- Designed to safely support beakers, flasks, and other glassware during heating operations
- Wire gauze mat distributes heat evenly, reducing thermal stress on glassware
- Tripod stand provides strong, stable support over Bunsen burners and spirit lamps
- Suitable for routine heating experiments in schools, universities, and research laboratories
- Reliable, lab-grade construction supplied by LabChoice Australia.
AUD 12.90 (Ex GST)
Tripod Stand, Triangular Cast Iron, Heat-Resistant and High Quality, Size 125 x 200 mm
- Triangular cast iron top: 125 mm wide
- 200 mm tall for optimal burner clearance
- Heat-resistant for direct flame applications
- Stable support for flasks, crucibles, gauze
- Common in chemistry, teaching, and QC labs
- Durable steel legs for long-term performance
AUD 12.90 (Ex GST)
didn't see what you are looking for ?
We’ll source it or make it for you. LabChoice supports your research every step.