Reduction / Reducer Adapter Borosilicate Glass Laboratory Grade
- Connects glassware of different joint sizes for seamless compatibility
- Ensures airtight, secure joints between apparatus of varying diameters
- Ideal for distillation, reflux, and custom lab setups
- Resistant to heat and chemical corrosion for long-lasting use
- Precision-crafted from BORO 3.3 borosilicate glass
- Manufactured and quality-tested by LabChoice Australia
From AUD 11.90 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Reflux Condenser Angled BORO 3.3 Borosilicate Glass
- Restricted Item – EUD Required: an End User Declaration (EUD) must be completed. A valid photo ID (such as a Passport, Driver Licence, or Proof of Age Card) is also required. Orders will not be shipped until all documentation is received and approved.
- Angled reflux condenser for smooth condensate return and stable reflux
- Ideal for organic synthesis, distillation and extended heating reactions
- High clarity BORO 3.3 glass for strong thermal and chemical resistance
- Efficient cooling pathway supports consistent vapour to liquid conversion
- Compatible with standard ground glass joints for easy system integration
- Made from LabChoice BORO 3.3 glass, high quality
From AUD 73.90 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Reflux Separator Receiver with PTFE Stopcock, BORO 3.3 Borosilicate Glass
- Designed for controlled condensate collection during reflux and distillation
- Vertical receiver body supports clean phase separation and monitoring
- PTFE stopcock provides smooth, inert, and precise liquid control
- Made from BORO 3.3 glass for strong thermal and chemical resistance
- Complies with ISO 3585 and ASTM E438 material standards
- Secure ground joints for leak free integration with standard glassware
Replacement Rotor for Compact High-Speed Micro Centrifuge, 12 x 1.5/2 mL and 4 x PCR8
- Replacement rotor for compatible compact high-speed micro centrifuge systems
- Holds 12 x 1.5 mL or 2 mL microcentrifuge tubes for routine sample spin-down
- Supports 4 x PCR8 strips for 0.2 mL PCR tube workflows
- Suitable for compact palm micro centrifuges used in daily laboratory sample preparation
- Practical spare rotor for maintenance, replacement or continued centrifuge use
- Designed for microtube and PCR strip compatibility where confirmed centrifuge fit is required
- Suitable for research, education, biotechnology, clinical and general laboratory environments
Respiration Apparatus with Two Boiling Tubes, BORO 3.3 Glass
- Designed for comparing inhaled and exhaled air in biology experiments
- Includes two glass boiling tubes for separate airflow pathways
- Each tube is fitted with a two-hole rubber stopper
- Supplied with one short and one long 5 mm glass delivery tube per side
- PVC tubing connects both tubes to a central plastic T-piece
- Suitable for use with an appropriate carbon dioxide indicator solution
- Ideal for school biology, respiration and gas-exchange demonstrations
AUD 199.90 (Ex GST)
Retort Clamp, 3-Prong, Adjustable with Non-Slip Rubber Jaws for Secure Grip, High Quality
- Three-prong design offers balanced and stable support
- Rubber-coated jaws prevent slipping and glass damage
- Adjustable grip accommodates various labware sizes
- Ideal for burettes, flasks, and condensers
- Commonly used in academic and industrial labs
- Made from lab-grade metal – Reliable durability
From AUD 12.00 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Retort Clamp, Four Prongs, Powder Coated Finish, High Quality
- Four-prong design ensures stable and secure grip
- Powder-coated finish resists corrosion and wear
- Adjustable jaws fit various lab glassware sizes
- Ideal for flasks, condensers, and burettes
- Used in teaching, research, and industrial labs
- Made from lab-grade metal – Reliable durability
From AUD 11.90 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Retort Ring, Mild Steel with Attached Bosshead, High Quality
- Corrosion-protected mild steel for durability
- Attached bosshead allows secure mounting to rods
- Available in 2", 3", and 4" internal diameters
- Supports funnels, flasks, and crucibles in labs
- Stable grip for heating, filtration, and support tasks
- Supplied by LabChoice Australia – High quality & reliable
From AUD 4.90 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Retort Ring, Stainless Steel with Attached Bosshead, Rust-Resistant, High Quality
- Rust-resistant stainless steel construction
- Bosshead attached for secure lab stand mounting
- Supports flasks, funnels, and crucibles
- Ideal for heating, filtration, or separation setups
- Durable, easy to clean, and corrosion-resistant
- Supplied by LabChoice Australia – Built to last
From AUD 8.90 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Retort Stand Kit, Laboratory Support Stand Set with Base, Rod and Clamps
- Laboratory retort stand kit with stable base, support rod, and clamps for secure setups
- Ideal for titration, filtration, heating, and general glassware support in lab work
- Adjustable clamp positions help achieve accurate height and angle alignment
- Suitable for schools, universities, research labs, and industrial QC environments
- Supports common apparatus such as burettes, funnels, flasks, condensers, and thermometers
- Strong, stable bench footprint helps reduce tipping during routine experiments
- Compatible with a wide range of clamp styles, check rod and bosshead fit
- High quality lab support solution from LabChoice Australia.
AUD 45.50 (Ex GST)
Retort Stand Polypropylene Base, Chemical-Resistant, Heavy Duty Lab Support
- Sturdy polypropylene base resists chemical corrosion
- Heavy-duty design supports demanding lab setups
- Compatible with rods, clamps, and labware
- Non-reactive surface ideal for chemical handling
- Used in education, pharma, and research labs
- Supplied by LabChoice Australia – Reliable quality
AUD 52.50 (Ex GST)
Retort Stand, Heavy Duty Mild Steel Base, High Quality
- Provides stable support for lab apparatus setups
- Heavy-duty steel base ensures tip-resistant stability
- 60 cm rod accommodates varied experimental needs
- Ideal for holding clamps, burettes, and glassware
- Used in teaching, research, and industrial labs
- Crafted for durability and long-term lab use
From AUD 20.50 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Ripple Tank for Wave Experiments, without Power Supply
- Economy ripple tank designed for demonstrating water wave behaviour in physics laboratories
- Transparent acrylic tank measures 580 × 500 × 80 mm with a 370 × 280 mm viewing window
- Sturdy plastic frame with four adjustable levelling feet supports stable laboratory setup
- Features a 4–6 V DC motor with an eccentric weight to generate controlled water surface waves
- Height-adjustable rippler support with two spherical point sources for wave demonstrations
- Specially shaped tank edges help minimise unwanted wave reflections during experiments
- Includes straight obstacles, curved reflector, refraction plate and wave demonstration accessories
- Supplied with a 12 V, 24 W illuminant, supporting rod and instructions for laboratory experiments
- Note: This model is supplied without a power supply. A 4–6 V DC source is required for the motor and a 12 V supply for the illuminant. Power supplies are available separately.
AUD 499.90 (Ex GST)
Rock Mineral and Fossil Specimens
- Educational geology specimen range for rocks, minerals and fossils
- Supports classroom identification, comparison and display activities
- Fossil collection includes 15 specimens with key sheet and geologic time chart
- Fossil set size is stated as 280 × 170 × 40 mm
- Rock collections support rock type classification and geology lessons
- Mineral and fluorescent mineral collections support specimen study and display
- For educational and display use only under appropriate supervision
From AUD 83.50 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Rock Mineral and Fossil Study Kits with Hardness Testing Set
- Hardness scale test kit includes numbered specimens plus streak plate, glass plate, penny and nail for classroom hardness testing workflows
- Rock, mineral and fossil collections offered as USA sets and study kits, supports identification, comparison and display activities
- Rock type options include igneous and sedimentary collections, plus rocks in a bag packs of 6 for fast classroom distribution
- Fluorescent minerals collection supports display and observation activities where fluorescence behaviour is being explored
- Safety notes provided for specimen handling, avoid dust, use ventilation and PPE, keep away from children, wash hands after handling, store dry
From AUD 47.50 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Rock Specimens For Geology - Pack of 10 Pcs
- Educational rock specimens for geology identification and display, supports classroom comparison of rock textures and mineral appearances
- Pegmatite samples option supplied pack of 10, supports teaching on coarse grained igneous rocks and mineral rich textures
- Rock options listed phyllite and quartzite, supports metamorphic rock recognition and comparison of foliation versus recrystallised textures
- Quartz variety specimens listed rose quartz, quartz crystal, jasper and agate, supports colour and form comparison within common silica materials
- Pumice listed as a specimen option, supports discussion of volcanic rock textures, keep specimens clean and store dry for long term classroom use
From AUD 24.90 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Rocker Chemker Vacuum Pump for Chemical-Resistant Laboratory Vacuum Support
- Chemical-resistant vacuum pump for lab and industrial vacuum processes
- PTFE and FFKM wetted parts resist most corrosive gases during use
- Oil-free diaphragm drive removes lubricant and regular oil changes
- Maintenance-free pump design supports clean operation with no oil pollution
- Quiet low-vibration operation supported by vibration-proof assembly
- Overheat protection shuts down when hot and resumes after cooling
From AUD 2,102.50 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Rocker Oil-Free Vacuum Pump for Clean Laboratory Vacuum Support
- Oil-free vacuum pump series for clean laboratory and industrial vacuum use
- Suitable for Rocker 300, 300DC, 400, 410, 800, 801, 810 and 811 models
- Compact oil-less pump design is lightweight and free from oil mist
- Prote overflow protection helps stop liquid being sucked into the pump
- Air inlet filter cartridge filters particles and moisture before pump entry
- Used for vacuum filtration, suspended solid testing and air sampling
From AUD 722.50 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Rocks in a Bag, Classroom Geology Specimen Sets
- Economy rock specimen packs supplied as sets of 6, supports classroom geology identification, comparison and rock cycle teaching
- Igneous pack defines igneous rocks as cooled magma or lava and lists six rocks, pumice, obsidian, rhyolite, basalt, gabbro and granite
- Specimen size stated 1 1/4 to 1 1/2 inch, each supplied in a zip lock bag with label, samples may change over time
- Metamorphic and sedimentary rocks in a bag options listed pack of 6, supports quick class distribution and basic classification tasks
- Education and display use only, safety guidance provided, avoid ingestion and dust, test in ventilated area with PPE, wet sample or tray use, wash hands, store dry, use under supervision
From AUD 27.50 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Rolling Cylinders, Metal and Plastic Pair
- Rolling cylinders pair for physics demonstrations
- Includes plastic and metal cylinders as listed
- Cylinders are identical in size as listed
- Cylinders have identical total mass as listed
- Different mass distribution causes different rolling behaviour
- Designed for rolling down a slope during demonstrations
- Useful for teaching rotational motion and moment of inertia concepts
- Suitable for school and university physics laboratories
- Helps compare how internal mass distribution affects motion
- Care should be taken not to drop the cylinders
- Rolling cylinders only, ramp and accessories are not included
- Use under appropriate laboratory or educational supervision
AUD 159.50 (Ex GST)
Rotary Evaporator Bump Trap Adapter, BORO 3.3 Glass
- BORO 3.3 glass for laboratory chemical and heat resistance
- Helps reduce sample splash and bumping carryover during evaporation
- Designed for use with compatible rotary evaporator glassware setups
- Useful for solvent removal, sample concentration and preparation work
- Clear glass construction allows easy visual monitoring during use
- Suitable for Australian schools, universities and research laboratories
From AUD 69.90 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Rotary Tube Mixer with Disc
- Variable 10 to 60 rpm speed range supports rotary tube mixer operation
- Adjustable disc angle from horizontal to vertical supports varied mixing actions
- Tilting head allows the disc to be held at any angle from horizontal to vertical
- Supplied disc has 20 threaded inserts and clips to suit tube diameters
- Centre locking screw is provided for heavier and unbalanced load operation
- Customised discs are available for small to medium tubes and bottle use
AUD 1,439.00 (Ex GST)
Rotisserie Accessory, Horizontal 24-Place Holder for 15 ml Centrifuge Tubes, Compatible with LCD Digital Tube Rotator
- Rotisserie accessory designed for a compatible LCD digital tube rotator
- Holds up to 24 × 15 mL centrifuge tubes horizontally
- Supports organised tube positioning during rotational mixing
- Enables simultaneous mixing of multiple laboratory samples
- Suitable for routine sample preparation and tube-mixing workflows
- Supplied as a horizontal centrifuge tube holder accessory, rotator not included
AUD 286.50 (Ex GST)
Rotisserie Accessory, Horizontal 24-Place Holder for 50 ml Centrifuge Tubes, Compatible with LCD Digital Tube Rotator
- Rotisserie accessory designed for a compatible LCD digital tube rotator
- Holds up to 24 × 50 mL centrifuge tubes horizontally
- Provides organised tube positioning during rotational mixing
- Supports simultaneous mixing of multiple large-volume samples
- Suitable for routine laboratory sample preparation and tube-mixing workflows
- Supplied as a horizontal tube holder accessory, rotator not included
AUD 286.50 (Ex GST)
Rotisserie Accessory, Horizontal 48-Place Holder for 1.5 ml Centrifuge Tubes, Compatible with LCD Digital Tube Rotator
- Rotisserie accessory designed for a compatible LCD digital tube rotator
- Holds up to 48 × 1.5 mL centrifuge tubes horizontally
- Supports organised tube positioning during rotational mixing
- Enables simultaneous mixing of multiple small-volume samples
- Suitable for routine sample preparation and tube-mixing workflows
- Supplied as a horizontal centrifuge tube holder accessory, rotator not included
AUD 321.50 (Ex GST)
Rotisserie Accessory, Vertical 16-Place Holder for 15 mL Centrifuge Tubes, Compatible with LCD Digital Tube Rotator
- Rotisserie accessory designed for a compatible LCD digital tube rotator
- Holds up to 16 × 15 mL centrifuge tubes vertically
- Provides organised tube positioning during rotational mixing
- Supports simultaneous mixing of multiple laboratory samples
- Suitable for routine sample preparation and tube-mixing workflows
- Supplied as a vertical centrifuge tube holder accessory, rotator not included
AUD 268.50 (Ex GST)
Rotisserie Accessory, Vertical 16-Place Holder for 50 mL Centrifuge Tubes, Compatible with LCD Digital Tube Rotator
- Rotisserie accessory designed for a compatible LCD digital tube rotator
- Holds up to 16 × 50 mL centrifuge tubes vertically
- Provides organised tube positioning during rotational mixing
- Supports simultaneous mixing of multiple large-volume samples
- Suitable for routine sample preparation and tube-mixing workflows
- Supplied as a vertical centrifuge tube holder accessory, rotator not included
AUD 268.50 (Ex GST)
Rotisserie Accessory, Vertical 32-Place Holder for 1.5 mL Centrifuge Tubes, Compatible with LCD Digital Tube Rotator
- Rotisserie accessory designed for a compatible LCD digital tube rotator
- Holds up to 32 × 1.5 mL centrifuge tubes vertically
- Provides organised tube positioning during rotational mixing
- Supports simultaneous mixing of multiple small-volume samples
- Suitable for routine sample preparation and tube-mixing workflows
- Supplied as a vertical centrifuge tube holder accessory, rotator not included
AUD 292.50 (Ex GST)
Rotor Adapter for 0.5 mL to 0.2 mL Tubes for High-Speed Microcentrifuge Rotors, 36 pcs Pack
- Rotor adapter designed to allow 0.2 mL tubes to fit into compatible 0.5 mL rotor positions
- Supplied as a 36 pcs pack for clear accessory ordering and replacement planning
- Supports 0.5 mL to 0.2 mL tube adaptation for small-volume centrifugation workflows
- Suitable for compatible high-speed microcentrifuge rotors used in routine laboratory sample preparation
- Helps laboratories use smaller 0.2 mL tubes without changing the complete rotor setup
- Useful for PCR-related workflows, small-volume sample handling and general laboratory centrifugation
- Rotor compatibility, adapter fit, tube type and approved centrifuge use should be confirmed before operation
Rotor Adapter for 2 mL to 0.2 mL Tubes for High-Speed Microcentrifuge Rotors, 24 pcs Pack
- Rotor adapter designed to allow 0.2 mL tubes to fit into compatible 2 mL rotor positions
- Supplied as a 24 pcs pack for clear accessory ordering and replacement planning
- Supports 2 mL to 0.2 mL tube adaptation for small-volume centrifugation workflows
- Suitable for compatible high-speed microcentrifuge rotors used in routine sample preparation
- Helps laboratories use smaller 0.2 mL tubes without changing the complete rotor setup
- Useful for PCR-related workflows, small-volume sample handling and general laboratory centrifugation
- Rotor compatibility, adapter fit, tube type and approved centrifuge use should be confirmed before operation
Rotor Adapter for 2 mL to 0.5 mL Tubes for High-Speed Microcentrifuge Rotors, 24 pcs Pack
- Rotor adapter designed to allow 0.5 mL tubes to fit into compatible 2 mL rotor positions
- Supplied as a 24 pcs pack for clear accessory ordering and replacement planning
- Supports 2 mL to 0.5 mL tube adaptation for small-volume centrifugation workflows
- Suitable for compatible high-speed microcentrifuge rotors used in routine sample preparation
- Helps laboratories use smaller 0.5 mL tubes without changing the complete rotor setup
- Useful for small-volume sample handling, research workflows and general laboratory centrifugation
- Rotor compatibility, adapter fit, tube type and approved centrifuge use should be confirmed before operation
Rotor Adapter for 50 mL to 15 mL Tubes for Clinical Centrifuge Rotors, 4 pcs Pack
- Rotor adapter designed to allow 15 mL tubes to fit into compatible 50 mL rotor positions
- Supplied as a 4 pcs pack for clear accessory ordering and replacement planning
- Supports 50 mL to 15 mL tube adaptation for clinical centrifuge workflows
- Accommodates 17 x 120 mm centrifuge tubes based on the supplied specifications
- Supports 13/16 x 100 mm blood collection tubes for compatible rotor applications
- Helps laboratories use smaller 15 mL tube formats without changing the complete rotor setup
- Rotor compatibility, adapter fit, tube dimensions and approved centrifuge use should be confirmed before operation
AUD 75.00 (Ex GST)
didn't see what you are looking for ?
We’ll source it or make it for you. LabChoice supports your research every step.