Smart pH Tester Kit for Small Volume and Test Tubes with LabSen 246-5 ATC Semi-Micro Electrode, -2.00 to 16.00 pH
- Smart pH tester kit for small-volume and test tube pH measurement workflows
- Supplied with LabSen 246-5 ATC semi-micro pH / temperature electrode for low-volume testing
- Ø6 mm sensor tip supports measurement in small samples as low as 60 µL when used with the semi-micro container
- Bluetooth connection to ZenTest Mobile App supports cloud-based measurement data management
- App-guided calibration helps users follow a structured calibration and parameter-setting workflow
- Complete kit includes User Manual, LabSen 246-5 pH Electrode, PH60-Z Meter Body, CalPod Solution Organizer, pH 4.00 Solution, pH 7.00 Solution, pH 10.01 Solution, 3M KCL Soaking Solution, Protective Cap and Semi-micro Container
AUD 635.00 (Ex GST)
Smart pH Tester Kit for Strong Acid and Hydrofluoric Acid Solutions with LabSen 835 ATC Electrode, -2.00 to 16.00 pH
- Smart pH tester kit for strong acidic, HF-containing and general water solution workflows
- Supplied with LabSen 835 pH Electrode and PH60-Z Meter Body for specialised acid sample testing
- Special HF membrane helps resist hydrofluoric corrosion and minimise acidic error
- Bluetooth connection to ZenTest Mobile App supports cloud-based measurement data management
- Complete kit includes User Manual, LabSen 835 pH Electrode, PH60-Z Meter Body, CalPod Solution Organizer, pH 1.68 Solution, pH 7.00 Solution, pH 10.01 Solution, 3M Soaking KCL Solution and Protective Cap
- Listed for up to 1000 HF measurements under specified conditions below 0.1 mol/L or 2000 ppm
AUD 590.00 (Ex GST)
Smart pH Tester Kit for Strong Alkaline and High Salinity Water with LabSen 845 ATC Electrode, -2.00 to 16.00 pH
- Smart pH tester kit for strong alkaline, high salinity and general water solution workflows
- Supplied with LabSen 845 ATC pH / temperature electrode for demanding sample conditions
- HA membrane helps minimise alkaline error in strong alkaline and high salinity samples
- Silver Ion Trap Reference System supports durable and stable electrode performance
- Bluetooth connection to ZenTest Mobile App supports cloud-based measurement data management
- Complete kit includes User Manual, LabSen 845 pH Electrode, PH60-Z Meter Body, CalPod Solution Organizer, pH 4.00 Solution, pH 7.00 Solution, pH 12.45 Solution, 3M Soaking KCL Solution and Protective Cap
AUD 590.00 (Ex GST)
Smart pH Tester Kit for Viscous Liquid with LabSen 855 ATC Electrode, -2.00 to 16.00 pH
- Smart pH tester kit for viscous liquid and complex sample measurement workflows
- Supplied with LabSen 855 pH Electrode and PH60-Z Meter Body for viscous sample testing
- Pre-pressurised long-life reference system helps reduce junction clogging in viscous liquids
- Bluetooth connection to ZenTest Mobile App supports cloud-based measurement data management
- Suitable for skincare products, coatings, slurry, glues, honey, resin and compatible thick liquid samples
- Complete kit includes User Manual, LabSen 855 pH Electrode, PH60-Z Meter Body, CalPod Solution Organizer, pH 4.00 Solution, pH 7.00 Solution, pH 10.01 Solution, 3M Soaking KCL Solution and Protective Cap
AUD 610.00 (Ex GST)
Smart pH Tester Kit for Wastewater, Suspensions and Emulsions with LabSen 335 ATC Electrode, -2.00 to 16.00 pH
- Smart pH tester kit for wastewater, suspensions, emulsions and other dirty liquid measurement workflows
- Supplied with LabSen 335 ATC pH electrode and PH60-Z meter body for complex liquid sample testing
- Open junction and polymer electrolyte help reduce junction clogging during dirty liquid measurement
- Bluetooth connection to ZenTest Mobile App supports cloud-based measurement data management
- Suitable for wastewater, suspensions, emulsions and compatible dirty or complex liquid samples
- Complete kit includes User Manual, LabSen 335 pH Electrode, PH60-Z Meter Body, CalPod Solution Organizer, pH 4.00 Solution, pH 7.00 Solution, pH 10.01 Solution, 3M Soaking KCL Solution and Protective cap
AUD 450.00 (Ex GST)
Smart Pocket ORP Tester Kit ZenTest® ORP60-Z for ORP and Temperature
- Smart pocket ORP tester kit for ORP and temperature measurement workflows
- Bluetooth connection to ZenTest mobile app supports guided operation, calibration records and email data sharing
- Four display modes include Simple Mode, Dial Mode, Graph Mode and Table Mode
- Smart controlling functions include operation reminders, self-diagnosis, alarm function, hold function and calibration reminder
- IP67 waterproof and dustproof design supports portable water testing and routine field use
- Complete kit includes Rugged Carrying Case, Quick Manual, ORP60-Z Smart Pocket ORP Tester, 3M KCl Soaking Solution, Calibration Bottle, 222 mV Calibration Solution and Lanyard
AUD 310.00 (Ex GST)
Smart Pocket pH Tester Kit ZenTest® PH60-Z for Water Testing, -2.00 to 16.00 pH
- Smart pocket pH tester kit for professional pH measurement in general water solution workflows
- Bluetooth connection to ZenTest mobile app supports guided calibration, measurement records and data sharing
- Four display modes include Simple Mode, Dial Mode, Graph Mode and Table Mode
- Smart controlling functions include calibration reminder, alarm function, hold function, self-diagnosis and electrode health reminder
- Double-junction electrode and blue-gel inner solution support stable pH measurement performance
- Complete kit includes Rugged Carrying Case, Quick Manual, PH60-Z Smart Pocket pH Tester, 3M KCl Soaking Solution, Calibration Bottle, pH 7.00 Calibration Solution, pH 4.00 Calibration Solution and Lanyard
AUD 260.00 (Ex GST)
Smart Spear pH Tester Kit ZenTest® PH60S-Z for Food, Solid and Viscous Samples, -2.00 to 16.00 pH
- Smart spear pH tester kit for food, solid and viscous sample measurement workflows
- Suitable for cheese, meat, fruit, dough, yogurt, sushi rice, jam, sauce and skincare product testing
- Bluetooth connection to ZenTest mobile app supports guided calibration, measurement records and email data sharing
- Smart controlling functions include operation reminders, self-diagnosis, alarm function, hold function and calibration reminder
- Four display modes include Simple Mode, Dial Mode, Graph Mode and Table Mode
- Complete kit includes Rugged Carrying Case, Quick Manual, PH60S-Z Smart Spear pH Tester, 3M KCl Soaking Solution, Calibration Bottle, pH 7.00 Calibration Solution, pH 4.00 Calibration Solution and Lanyard
AUD 495.00 (Ex GST)
Snap Ring Chromatography Vials, BORO 3.3
- BORO 3.3 borosilicate glass construction for excellent chemical resistance and thermal durability
- Snap ring design allows quick and convenient sealing for routine chromatography workflows
- Suitable for GC and HPLC sample handling in laboratory and analytical applications
- Clear vial format supports easy sample visibility and identification
- Designed for reliable sample preparation, storage, and autosampler use
- Suitable for research, quality control, and general analytical laboratory testing
- Practical choice for laboratories requiring consistent chromatography vial performance
From AUD 21.50 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Snap-in Microplate Clamp for Digital Vortex Mixer
- Snap-in microplate clamp for compatible digital vortex mixers
- Suitable for full-skirt PCR plates, cell culture plates, ELISA plates and deep well plates
- Supports half-skirt and no-skirt PCR plates when used with the included rectangular foam
- Helps hold plates securely during vortex mixing workflows
- Practical accessory for organised plate-based sample preparation
- Supplied by LabChoice Australia for compatible mixer use
AUD 44.50 (Ex GST)
Snap-in Universal top plate for Digital Vortex Mixer
- Snap-in universal top plate for compatible digital vortex mixers
- Designed for quick attachment and easy accessory setup
- Supports suitable tube adapters and mixer attachments
- Helps keep samples stable during vortex mixing
- Practical replacement or spare part for routine lab use
- Supplied by LabChoice Australia for compatible mixer workflows
AUD 44.50 (Ex GST)
Soda Glass Tubing, 50 cm Length, 6 mm to 10 mm OD
- Soda glass tubing for laboratory and educational use
- Also known as flint glass tubing
- Sold in kilogram packs
- Suitable for compatible classroom glass tubing activities
- Practical for demonstrations, apparatus construction and general lab setups
- Supplied quantity per kilogram varies by tubing diameter
- Dimensional tolerance listed as ±1 mm
- Confirm chemical, heat and dimensional suitability before use
- Use under appropriate laboratory or educational supervision
- Soda Glass Tubing, 50 cm Length, 6 mm OD × 3.90 mm ID, 56 Pieces per 1 kg Pack, ±1 mm
- Soda Glass Tubing, 50 cm Length, 7 mm OD × 4.8 mm ID, 42 Pieces per 1 kg Pack, ±1 mm
- Soda Glass Tubing, 50 cm Length, 8 mm OD × 5.5 mm ID, 33 Pieces per 1 kg Pack, ±1 mm
- Soda Glass Tubing, 50 cm Length, 10 mm OD × 7.7 mm ID, 25 Pieces per 1 kg Pack, ±1 mm
From AUD 19.90 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Sodium Ion Electrode, Replacement Sensor with 2 to 9900 ppm Range
- Replacement sodium ion sensor for LAQUAtwin B-722 and Na-11
- Direct measurement from 0.3 mL sample, or 0.05 mL with Sampling Sheet B
- Measures sodium ion concentration from 2 to 9900 ppm
- Sliding sensor guard cap helps scoop water samples
- Waterproof design with built-in temperature sensor
AUD 227.70 (Ex GST)
Sodium Ion Standard Solution, 150 ppm Calibration for Pocket Sodium Meters
- 150 ppm sodium ion standard solution
- Designed for LAQUAtwin and Cardy sodium meter calibration
- Suitable for B-722, Na-11, and Cardy C-122
- Supplied in practical 14 mL bottles
- Pack includes 6 bottles with SDS noted
AUD 110.00 (Ex GST)
Sodium Ion Standard Solution, 2000 ppm Calibration for Pocket Sodium Meters
- 2000 ppm sodium ion standard solution
- Designed for LAQUAtwin and Cardy sodium meter calibration
- Suitable for B-722, Na-11, and Cardy C-122
- Supplied in practical 14 mL bottles
- Pack includes 6 bottles with SDS noted
AUD 110.00 (Ex GST)
Soil Test Kit, Soil Acidity and Nutrient Balance Testing Kit
- Tests pH and NPK values to support practical soil condition assessment across a range of growing applications
- Includes 32 tests in one kit, helping with repeat checking for classrooms, gardens, and demonstration use
- Identifies acid or alkaline soil condition alongside nutrient relevance for lawns, vegetables, shrubs, trees, and flowering plants
- Useful for simple soil analysis where nutrient balance and plant suitability need to be assessed clearly
- Safety guidance recommends glasses and gloves, with care required if test capsules break during handling
AUD 74.90 (Ex GST)
Solar Furnace, 305 mm, for Heating Materials Using the Sun
- Solar furnace demonstration apparatus for science education
- Uses a 12" diameter parabolic dish to concentrate solar energy
- 305 mm diameter format for classroom demonstrations
- Reflective mirror helps focus sunlight onto the heating area
- Includes attached copper receptacle for heating compatible materials
- Demonstrates the power of concentrated solar radiation
- Useful for lessons on solar energy, heat transfer and renewable energy
- Supplied with teacher’s guide including 6 experiments
- Suitable for laboratory or educational settings only
- Use outdoors or in suitable direct sunlight under controlled supervision
- Concentrated sunlight can cause burns, fire risk and eye hazard
- Use under appropriate teacher or laboratory supervision
AUD 221.90 (Ex GST)
Solar Panel, 1.5 V, 450 mA, 62 × 120 mm
- Solar panel module for general science experiments
- Suitable for solar energy and electricity demonstrations
- Output listed as 1.5 V
- Current listed as 450 mA
- Panel size listed as 62 × 120 mm
- Epoxy resin construction for practical classroom use
- Useful for renewable energy, circuit and energy conversion activities
- Suitable for school, university and teaching laboratory use
- Can be used with compatible low-voltage experiment circuits
- Confirm load, wiring and polarity before use
- Intended for laboratory or educational settings only
- Use under appropriate teacher or laboratory supervision
AUD 17.50 (Ex GST)
Solution Kit, Calcium Ion Calibration and Cleaning Set
- Solution kit for LAQUAtwin Ca-11C
- Includes Y052L and Y052H calcium ion standard solutions
- Includes 251 cleaning solution, 3 bottles
- Supports calibration and routine meter care
- Practical kit for compatible Ca-11C workflows
AUD 918.50 (Ex GST)
Sonometer Spare Set of Wires
- Spare wire set for compatible sonometer apparatus
- Suitable for sound, vibration and Mersenne’s law demonstrations
- Includes brass wire
- Includes iron wire
- Includes badminton racket wire
- Supports comparison of different string or wire materials
- Useful for frequency, pitch and vibrating string experiments
- Suitable for school physics and teaching laboratory workflows
- Confirm compatibility with the sonometer before ordering
- Use under appropriate laboratory or educational supervision
AUD 18.90 (Ex GST)
Sound Level Meter for Measuring Noise and Sound Levels
- Sound level meter for laboratory and educational sound measurement
- Measurement range listed as 30.0 dB to 130.0 dB
- Supports A weighting and C weighting as listed
- Frequency range listed as 31.5 Hz to 8000 Hz
- Fast and slow response selectable
- LED backlit display for easier reading
- Pocket sized design as listed
- Plastic casing as listed
- Size listed as 210 × 55 × 32 mm
- 9 V format listed in supplied specification
- Confirm calibration requirement before use
- Use under appropriate laboratory or educational supervision
AUD 171.90 (Ex GST)
Soxhlet Extraction Set with Allihn Condenser BORO 3.3 Glass
- Soxhlet extraction set for continuous solvent extraction of soluble compounds
- Made from BORO 3.3 borosilicate glass for chemical and thermal resistance
- Includes Allihn condenser to support efficient vapour condensation and reflux
- Suitable for extraction work in chemistry, research, education, and analytical laboratories
- Designed for controlled heating, solvent cycling, and repeatable extraction procedures
- Durable laboratory glassware construction supports reliable routine use in Australian labs
AUD 499.90 (Ex GST)
Soxhlet Stillhead for Extraction Apparatus, Borosilicate Glass (BORO 3.3), Heavy Quality
- Heavy quality design ensures long-lasting durability
- Compatible with standard Soxhlet extraction setups
- Facilitates efficient solvent condensation and return
- Tight joint connections reduce vapor loss
- Used in organic chemistry, food, and pharma labs
- Made from LabChoice BORO 3.3 glass – High quality
From AUD 68.50 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Spare Bell for Bell Jar Experiment Kit
- Replacement bell for Bell Jar Experiment Kit
- Suitable for LC-80-MS0019-01 experiment kit
- Used for sound in vacuum demonstrations
- Bell diameter stated as 60 mm
- Overall dimensions stated as approximately 130 mm × 85 mm
- Bell jar kit, vacuum plate and pump are not included
- For laboratory or educational use under appropriate supervision
AUD 26.50 (Ex GST)
Spare Pestles, Replacement Pestles for Glass and Porcelain Mortars
- Spare pestles for replacing damaged or misplaced mortar pestles
- Suitable for use with compatible glass and porcelain mortars
- Options listed for 100 mL, 300 mL, 500 mL and 1000 mL mortars
- Additional option listed for 60 mm glass mortar compatibility
- Pestle length is stated as approximately 100 mm across the listed options
- Supports grinding, mixing and crushing tasks in laboratory workflows
- For laboratory or educational use only under appropriate supervision
From AUD 2.50 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Spare Receiver for Dean and Stark Apparatus with Stopcock Cap, Borosilicate Glass (BORO 3.3), Heavy Quality
- Compatible with standard Dean-Stark assemblies
- Integrated stopcock allows precise drainage control
- Heavy wall glass for durability under heat
- Ideal for water content analysis via distillation
- Used in chemical synthesis, petrochemicals, and R&D
- Made from LabChoice BORO 3.3 glass – High quality
From AUD 79.00 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Spare Wick, Alcohol Burner Replacement Wick for Spirit Lamps
- High-absorbency cotton ensures steady flame
- Compatible with most spirit and alcohol burners
- Trim-to-fit design for various burner types
- Essential for routine replacement and safety
- Supports consistent burning in lab settings
- Packaging: 10 Pcs and 25 Pcs
From AUD 6.00 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Spatula Knife Wooden Handle, Stainless Steel Blade, High Quality
- Stainless steel blade resists corrosion and staining
- Wooden handle offers comfortable, firm grip
- Ideal for scraping, mixing, and sample transfer
- Used in chemistry, biology, and material labs
- Durable design supports repeated daily use
- Supplied by LabChoice Australia – Trusted quality
From AUD 7.50 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Spatula, Stainless Steel Laboratory with Spoon and Shovel Ends
- Multipurpose stainless steel laboratory spatula for sampling and transfer
- Dual-ended design with spoon end and shovel end for flexible handling
- Spoon end supports scooping powders, salts, granules and small samples
- Shovel end assists with lifting, spreading and transferring solid materials
- Made from stainless steel 304 for durable routine laboratory use
- Suitable for general laboratory sample preparation and bench handling
- Useful for education, research, testing and industrial QC laboratories
- Available in 150 mm, 180 mm and 200 mm lengths
- 200 mm size is heavy duty for more demanding laboratory applications
- Supplied individually as the selected spatula only
- Confirm chemical compatibility and cleaning method before use
From AUD 4.50 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Specimen Insect Bug Viewer, 25 mm, Magnified with Grid
- Specimen viewer for insects and small samples
- Designed for laboratory and educational observation
- Magnified viewer as listed
- Includes grid as listed for visual reference
- Size listed as 25 mm
- Useful for observing insects, bugs and small specimens
- Supports biology, ecology and nature study activities
- Compact format for classroom and field demonstrations
- Helps students view specimen details more clearly
- Suitable for supervised hands-on science activities
- Confirm magnification level before ordering
- Use under appropriate laboratory or educational supervision
AUD 3.90 (Ex GST)
Spectrum Tube EHV Unit and Tube Support, Without Tubes
- EHV power supply unit for compatible spectrum discharge tubes
- Supplied with tube support for holding different spectrum tube lengths
- Self-contained unit designed to operate from 240 V AC mains power
- Deep recessed high-voltage socket supports direct tube connection
- Stainless steel rod and sliding clamp support tube positioning
- Removable mains cable supports practical setup and storage
- High-voltage apparatus for supervised educational use only
AUD 422.50 (Ex GST)
Spectrum Tubes 208 mm Length, Set of 6
- Set of 6 spectrum tubes for spectroscopy and discharge demonstration work
- Includes hydrogen, mercury, helium, nitrogen, neon and argon tubes
- Bright discharge supports clear classroom observation of spectral lines
- Each tube has a stated size of 208 mm overall length × 12 mm diameter
- Supplied in a foam case for organised storage and handling
- Designed for use with a compatible spectrum tube EHV power unit
- For supervised laboratory or educational use with suitable high-voltage safety
AUD 254.90 (Ex GST)
didn't see what you are looking for ?
We’ll source it or make it for you. LabChoice supports your research every step.