Laboratory Tongs, Beaker Crucible and Dish Handling Type
- Laboratory tongs for handling hot beakers, crucibles, and evaporating dishes during practical heating work
- Includes rubber sleeved beaker tongs, forged stainless steel crucible tongs, and evaporating dish handling option
- Beaker tongs state 260 mm length, 130 mm opening width, and maximum temperature of 120°C
- Crucible tongs state 200 mm length with maximum opening width of 110 mm when open
- Evaporating dish tongs state 240 mm length and suitability for dishes up to 125 mm
From AUD 9.50 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Laboratory Tray, Polypropylene, for Lab Storage and Handling
- Multipurpose laboratory tray for storage and handling
- Moulded in polypropylene as listed
- Brand listed as PolyLab
- Autoclavable tray as listed
- Suitable for sterilising and drying compatible laboratory items
- Useful for glassware, porcelain ware and laboratory instruments
- Tapered walls support nesting and easier storage
- Approximate overall size listed as 18.5 × 14 × 3 inch
- Inside tray size listed as 16 × 12 inch
- Inside wall height listed as 3 inch
- Confirm autoclave conditions and chemical compatibility before use
- Use under appropriate laboratory or educational supervision
From AUD 35.90 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Laboratory Tubing for Bunsen Burner, Vacuum and Pressure
- Laboratory tubing range for Bunsen burner, vacuum and pressure use
- Gas rubber tubing option to suit Bunsen burners
- Grey silicone Bunsen burner tubing with anti-roll design
- Silicone tubing size stated as 8 × 12 mm
- Vacuum and pressure rubber tubing option available
- Sold by the metre and cut to requested size where stated
- Check tubing for cracks, splits or hardening before use
From AUD 4.50 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Large Audio Amplifier, Built-In Speaker for Physics Experiments
- IEC large audio amplifier for laboratory and educational use
- Rugged construction designed to withstand regular student use
- Built-in 75 mm diameter loudspeaker
- Operates directly from 220–240 V AC mains supply
- 3.5 mm phone jack input with maximum signal level of 15 mV
- Banana plug input with maximum signal level of 150 mV
- Integrated loudspeaker with dedicated on/off switch
- 4 mm output sockets for connection to a compatible oscilloscope
- Supports audio signal amplification and waveform observation
- Suitable for sound, acoustics and electronics experiments
- Smaller portable battery-operated model available separately
- Designed for school, university and physics teaching laboratories
AUD 246.50 (Ex GST)
Large Demonstration Compass, 77 mm Diameter
- Large demonstration compass for science education
- Magnetic compass designed for classroom visibility
- Diameter listed as 77 mm
- Useful for teacher-led demonstrations
- Supports lessons on magnetism and Earth’s magnetic field
- Practical tool for showing compass direction and needle movement
- Suitable for physics, geography, field science and STEM teaching
- Larger size helps students observe compass behaviour more clearly
- Suitable for school, university and teaching laboratory use
- Keep away from strong magnets and magnetic interference when reading
- Use under appropriate laboratory or educational supervision
AUD 4.90 (Ex GST)
Large Demonstration Manometer for Low-Pressure Measurement
- Large demonstration manometer for laboratory and educational use
- Designed as a water U-tube manometer
- Measurement range listed as ±300 mm
- Overall size listed as 100 × 560 mm, W × H
- Fitted with a ring for wall hanging as listed
- Uses clear PVC hose formed into a U-tube
- PVC hose diameter listed as 12 mm
- Scale length listed as 400 mm
- Tube ends protrude from the top for attaching other tubing
- Useful for demonstrating low pressure measurement in mm water height
- Suitable for small pressure and gas pressure demonstrations
- Use under appropriate laboratory or educational supervision
AUD 156.90 (Ex GST)
Large Platform Multi-Specimen Test Tube Adapter, 44 holesXφ5mm+55 holesXφ6.6mm+30 holesXφ9.8mm, used with VT1.3/ VT1.2/PS1.1
- Large platform adapter for compatible digital vortex mixer use
- Multi-size layout supports organised specimen tube mixing
- Includes 44 holes × Ø5 mm, 55 holes × Ø6.6 mm and 30 holes × Ø9.8 mm
- Helps hold multiple tube sizes in one accessory setup
- Practical for high-throughput sample preparation workflows
- Supplied by LabChoice Australia for compatible mixer use
AUD 53.50 (Ex GST)
Large Pulley with Universal Clamp, 70 mm
- Large pulley with universal clamp for mechanics, force and motion experiments
- 70 mm plastic pulley mounted on a metal clamp
- Universal clamp can be fixed to a bench up to 38 mm thick
- Clamp can also be attached to a support rod up to 13 mm diameter
- Suitable for classroom demonstrations involving tension, load, force direction and simple pulley systems
- Compact design supports quick setup on compatible benches or laboratory support rods
- Useful for physics teaching, science education and laboratory mechanics experiments
- Bench thickness, support rod diameter, load condition and experiment setup should be confirmed before use
AUD 19.00 (Ex GST)
Laser View Kit and Part Sets for Optical Fibre
- Laser view kit for classroom optics and photonics demonstrations
- Specially moulded prisms and bars make a laser beam visible as it passes through the plastic
- Full set includes 8 parts
- Part set option includes 6 shaped optical pieces
- Bar-only option includes 2 bars
- Special prism shapes match the Hodson Light Box kit formats
- Straight and curved bars support optical fibre and internal reflection demonstrations
- Suitable for teaching light paths, refraction, internal reflection and photonics concepts
- Confirm laser source, classroom method and supervision requirements before use
From AUD 103.50 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Law of Conservation of Mass Apparatus Bottle
- Experiment bottle for demonstrating the Law of Conservation of Mass
- Popular classroom chemistry demonstration product
- Narika product as listed
- Designed for comparing mass before and after a chemical reaction
- Uses a sealed reactor format to help contain gas produced during reaction
- Suitable for reaction between hydrochloric acid and sodium hydrogen carbonate
- Special rubber ring helps seal the reactor as listed
- Helps students understand mass conservation in a closed system
- Size listed as 65 × 150 mm
- Useful for school and university chemistry teaching
- Chemicals and balance are not included unless specified separately
- Use under appropriate laboratory or educational supervision
AUD 64.90 (Ex GST)
LCD 15-Channel Magnetic Stirrer, Aluminium Work Plate, up to 0.4 L Capacity
- Efficient, simple, safe, multi-position agitator is the ideal choice for sample testing.
- Simple and easy operation panel: 15 stirring positions are controlled by 3 independent channels, all channels are available at different speeds and times.
- Brushless DC motor and powerful magnetic ensure fast and accurate stirring speed.
- Aluminum laser engraving disk surface, skid and corrosion proof anti-abrasive.
AUD 2,040.00 (Ex GST)
LCD 3D Shaker with Non-Slip Dish Platform, 9° Tilt, 5 kg Load Capacity
- Supplied with dish platform, non-slip mat and 8 fixed strings for compatible sample holding
- Dish platform dimension is listed as 30 x 28.5 cm
- Gentle 3D motion with fixed 9° tilt angle supports uniform shaking and mixing
- Large multifunctional 3D shaker for controlled laboratory mixing workflows
- Speed range supports 10-70 rpm for adjustable rotational mixing
- Maximum load capacity is listed as 5 kg with platform
- Anti-slip silicone disc surface supports improved sample placement stability
- Independent LCD displays show time and speed for clear operation monitoring
- Time setting range supports 1 minute to 19 hours 59 minutes
- Incubator compatible, subject to size, temperature, humidity and operating condition confirmation
- Various platform accessories support use with different compatible vessels
- Work plate dimension is listed as 300 x 285 mm
- Unit dimensions are listed as 360 x 430 x 106 mm, with 9 kg weight
- Platform compatibility, vessel type, load balance, incubator suitability and speed setting should be confirmed before use
AUD 1,489.00 (Ex GST)
LCD Digital Glass Ceramic Hotplate with Package, 10 Inch and Heating Temperature up to 500°C
- 10-inch glass ceramic work plate provides excellent chemical resistance and efficient heat transfer
- Heating range from room temperature to 500°C in 1°C increments for high-temperature sample preparation
- LCD display shows temperature and timer settings for clear routine operation
- PT1000 external temperature sensor supports sample temperature control with ±0.2°C sensor accuracy
- HOT warning flashes when the work plate temperature is above 50°C, even after the hotplate is turned off
- Timer function from 1 minute to 99 hours 59 minutes supports controlled heating procedures
- SD card data recording supports real-time recording of instrument running data
AUD 1,204.00 (Ex GST)
LCD Digital Glass Ceramic Hotplate with Package, 4 Inch and Heating Temperature up to 550°C
- Residual heat warning flashes above 50°C for safer heated laboratory operation.
- HOT alert continues after power-off to indicate remaining surface heat.
- Dual safety circuits monitor faults and support dependable device protection.
- Auto heating stop helps reduce risk during abnormal operating conditions.
- LCD shows set and real-time temperature, time and operating values.
- Timer range: 1 min to 99 h 59 min, with temperature sensor and support clamp included for practical laboratory setup use.
AUD 714.50 (Ex GST)
LCD Digital Glass Ceramic Hotplate with Package, 7 Inch and Heating Temperature up to 550°C
- Residual heat warning flashes above 50°C to support safer heated laboratory operation.
- HOT alert remains visible after power-off, helping users recognise post-use surface heat.
- Dual safety circuits monitor device and support reliable operator protection during use.
- Auto power cut-off helps reduce risk during abnormal heating or operating conditions.
- LCD shows set and real-time values for clear speed and temperature control.
- Timer: 1 min to 99 h 59 min, sensor and support clamp.
AUD 898.50 (Ex GST)
LCD Digital Glass Ceramic Hotplate, 10 Inch, Heating Temperature up to 500°C
- LCD screen displays temperature clearly for easy heating control.
- Maximum heating temperature reaches up to 500°C for demanding lab use.
- 10 inch glass ceramic work plate supports efficient heat transfer.
- PT1000 sensor supports external temperature control with ±0.2°C accuracy.
- HOT warning flashes above 50°C to indicate residual surface heat.
- Heating range from room temperature to 500°C supports flexible lab workflows.
AUD 1,143.00 (Ex GST)
LCD Digital Horizontal Tube Rotator with Timer 16-Place 50 mL Vertical Tube Holder
- LCD displays speed and operating time for clear monitoring during use
- Adjustable speed range from 10 to 70 rpm supports controlled tube rotation
- Continuous 360° horizontal rotation provides gentle but effective sample mixing
- Adjustable 0° to 90° tilt angle supports different tube mixing orientations
- Continuous and timed operating modes suit routine and scheduled workflows
- Brushless DC motor supports extended operation and longer service life
- Compatible with disk and rotisserie accessories for 1.5 mL and 50 mL centrifuge tubes
AUD 1,490.00 (Ex GST)
LCD Digital Hotplate with 4 Inch Glass Ceramic Plate and Heating Temperature up to 550°C
- Residual heat warning flashes above 50°C to indicate a hot surface.
- HOT alert continues after power-off for post-use heat awareness.
- Dual safety circuits monitor faults for improved device protection.
- Auto heating stop supports safer operation during abnormal conditions.
- LCD shows set and real-time temperature and time values clearly.
- Timer range from 1 min to 99 h 59 min supports controlled heating cycles.
AUD 653.50 (Ex GST)
LCD Digital Hotplate with 7 Inch Glass Ceramic Plate and Heating Temperature up to550°C
- Residual heat warning flashes above 50°C to indicate a hot surface.
- HOT alert continues after power-off for safer post-use handling.
- Dual safety circuits monitor the device for improved protection.
- Auto power cut-off helps protect the operator during abnormal conditions.
- LCD shows set and real-time values for clear operating control.
- Timer range from 1 min to 99 h 59 min supports controlled heating cycles.
AUD 837.50 (Ex GST)
LCD Digital Hotplate With Package, 6 Inch Ceramic-Coated Aluminium Plate, up to 380°C Heating
- 6-inch ceramic-coated aluminium work plate supports routine laboratory heating
- Heating temperature range from room temperature to 380°C in 1°C increments
- LCD display shows temperature and time for clear digital operation
- PT1000 external temperature sensor connection supports sample temperature monitoring
- Temperature display accuracy of ±1°C supports routine heating visibility
- Overheating temperature protection is set at 420°C for controlled operation
- Compact single-position design suits laboratories, schools and technical workspaces
AUD 490.50 (Ex GST)
LCD Digital Hotplate, 6 Inch Ceramic-Coated Aluminium Plate, up to 380°C Heating
- 6-inch ceramic-coated aluminium work plate supports routine laboratory heating
- Heating temperature range from room temperature to 380°C in 1°C increments
- LCD display shows temperature and time for clear operating visibility
- PT1000 external temperature sensor supports accurate sample temperature monitoring
- Overheating temperature protection is set at 420°C for controlled operation
- Compact single-position design suits routine benchtop heating workflows
- Suitable for laboratories, schools, testing areas and technical workspaces
AUD 428.50 (Ex GST)
LCD Digital Infrared Heating Magnetic Stirrer with Package, 7 Inch, up to 20 L Capacity
- LCD digital infrared heating magnetic stirrer package for laboratory heating and mixing workflows
- 180 × 180 mm, 7 inch microcrystalline glass work plate
- Maximum stirring quantity listed as 20 L for water
- Speed range from 100 to 1500 rpm with ±10 rpm accuracy
- Heating temperature range from room temperature to 280°C in 1°C increments
- LCD display shows speed and temperature for clear parameter setup
- Brushless DC motor supports stable, spark-free stirring operation
- PT1000 temperature sensor supports improved accuracy up to ±0.2°C
- RS232 data connector supports compatible remote control use
- Package includes support clamp and temperature sensor
AUD 634.00 (Ex GST)
LCD Digital Infrared Heating Magnetic Stirrer, 7 Inch Microcrystalline Glass Plate, up to 20 L Capacity
- LCD digital infrared heating magnetic stirrer for laboratory heating and mixing workflows
- 180 × 180 mm, 7 inch microcrystalline glass work plate
- Maximum stirring quantity listed as 20 L for water
- Speed range from 100 to 1500 rpm with ±10 rpm accuracy
- Heating temperature range from room temperature to 280°C in 1°C increments
- LCD display shows speed and temperature for clear parameter setup
- Temperature control accuracy listed as ±1°C below 100°C and ±1% above 100°C
- Brushless DC motor supports stable stirring operation
- RS232 data connector supports compatible remote control use
- Hot warning flashes above 50°C with overheating protection at 340°C
AUD 572.00 (Ex GST)
LCD Digital Magnetic Hotplate Stirrer for 5L Heating
- Maximum heating reaches 380°C for routine laboratory heat mixing and sample preparation.
- High-resolution LCD shows actual temperature and stirring speed for clear operation control.
- Brushless DC motor supports maintenance-free use, while digital speed control provides stirring up to 1500 rpm.
- Ceramic-coated aluminium work plate enables fast heat transfer.
- PT1000 sensor support allows external temperature control for more accurate heating performance in suitable laboratory heating and stirring workflows across daily lab use.
AUD 510.00 (Ex GST)
LCD Digital Magnetic Stirrer, 7 Inch, up to 20 L Capacity
- High-temperature-resistant strong magnets support powerful stirring for viscous liquids.
- Safety lock helps prevent accidental operation changes.
- Residual heat warning flashes “HOT” above 50°C, even after power-off.
- Brushless DC motor delivers spark-free, low-noise, maintenance-free operation.
- LCD shows set and real-time speed, time, and temperature values.
- Timer range from 1 min to 99 h 59 min, with heating stop at countdown end.
AUD 898.50 (Ex GST)
LCD Digital Magnetic Stirrer, Round Plate 5 Inch, up to 20 L Capacity
- Strong magnets support reliable mixing of viscous liquids and solutions.
- Parallel magnetic field provides uniform stirring force across the vessel base.
- IP42 protection level supports safer operation in routine laboratory environments.
- Brushless DC motor is spark-free, quiet and maintenance-free for daily lab use.
- LCD shows set and real-time speed, time and temperature values clearly.
- Timer adjustable from 1 min to 99 h 59 min for controlled mixing cycles.
AUD 837.50 (Ex GST)
LCD Digital Magnetic Stirrer, up to 5 L Capacity
- High-resolution LCD displays actual stirring speed for clear operating control.
- Maintenance-free brushless DC motor supports reliable long-term laboratory use.
- Ceramic-coated aluminium work plate is corrosion resistant and easy to clean.
- Digital speed control provides adjustable stirring performance up to 1500 rpm.
- Maximum stirring quantity supports up to 5 L of H₂O for routine lab mixing.
AUD 408.50 (Ex GST)
LCD Digital Thermo Mix with Heating, Cooling, Mixing and Choice of 1 Heating Block
- Heating, cooling and mixing functions in one compact thermo mix unit
- Supplied with choice of 1 compatible heating block
- Temperature control range supports 15°C below room temperature up to 100°C
- Temperature setting range listed as 0°C to 100°C
- Mixing speed range from 200 to 1500 rpm with 3 mm mixing orbit
- Mechanical fixation supports secure block positioning during operation
- Touch operation with real-time speed, temperature and time display
- Programmable operation with multiple memory settings for repeatable workflows
- Quick interchange block system enables tool-free block changes and flexible tube compatibility
- Built-in safety and calibration features support consistent performance and long-term temperature stability
AUD 2,857.00 (Ex GST)
LCD Digital Thermo Mix with Heating, Mixing, Touch Operation and Choice of 1 Heating Block
- Heating and mixing functions in one compact thermo mix unit, designed to streamline sample preparation and reduce bench space requirements in laboratory environments
- Supplied with choice of 1 compatible heating block, allowing users to select a format suited to their specific tube or vessel application
- Temperature range supports room temperature to 100°C for flexible heating and incubation-style workflows
- Temperature setting range listed as 15°C to 100°C for precise programmable control across common laboratory protocols
- Mixing speed range from 200 to 1500 rpm with 3 mm mixing orbit for consistent and reliable sample agitation
- Mechanical fixation supports secure block positioning during operation, improving stability and safety during mixing and heating cycles
- Touch operation with real-time speed, temperature and time display for clear monitoring and intuitive digital control throughout use
AUD 2,244.00 (Ex GST)
LCD Digital Thermo Mixer with Heating, Cooling, Touch Control and Choice of 1 Magnetic Heating Block
- Integrated heating and cooling thermo system for flexible laboratory workflows
- Supplied with choice of 1 compatible heating block to suit selected tube or vessel formats
- Wide temperature range from 25°C below room temperature up to 110°C
- Temperature setting range listed as -5°C to 110°C for precise heating and cooling control
- Temperature accuracy and uniformity specified as ±0.5°C at 20 to 45°C
- Magnetic fixation system allows fast, tool-free block placement and secure positioning
- Touch operation interface with TFT display for clear control and real-time monitoring
- Programmable operation supports repeatable multi-stage laboratory procedures
- Suitable for sample preparation, incubation, mixing and temperature-controlled reactions
- Compact benchtop design with interchangeable blocks for different sample formats
AUD 2,244.00 (Ex GST)
LCD Digital Tube Rotator with 8-Place 50 mL Tube Holder Disk
- LCD displays the selected speed and operating time for clear monitoring
- Adjustable speed range from 10 to 70 rpm supports controlled tube mixing
- Continuous 360° rotating action provides gentle but effective sample movement
- Adjustable tilt angle from 0° to 90° supports different mixing orientations
- Continuous and timed operating modes suit routine and scheduled laboratory workflows
- Brushless DC motor supports extended operation and a longer service life
- Compatible with holder accessories for 1.5 mL and 50 mL centrifuge tubes
AUD 1,265.50 (Ex GST)
Save 23%
LCD Digital Vortex Mixer Up to 3000 rpm, Brushless DC Motor
- LCD screen displays real-time speed and time for easy adjustment and monitoring.
- Adjustable speed ranges from gentle to vigorous mixing to suit various needs.
- Stable with pressure-mounted accessories to prevent slippage and splashing.
- Brushless DC motor for high stability and maintenance-free operation.
- Sturdy base ensures stability during operation for safety.
- Includes various accessories for different sizes and types of tubes and plates.
- Low noise for a quiet working environment.
AUD 495.50 (Ex GST)
didn't see what you are looking for ?
We’ll source it or make it for you. LabChoice supports your research every step.