Viscometer Holding Clamp for Glass Viscometers
- Laboratory holder for compatible glass viscometers
- Designed to support viscometers during viscosity testing
- Helps keep the viscometer positioned during approved methods
- Suitable for use with compatible viscosity bath setups
- Adjustable screw mechanism visible on the holder
- Useful for student, training and laboratory applications
- Supports safer handling of delicate viscometer glassware
- Helps reduce movement during filling, timing and measurement
- Suitable for school, university and general laboratory use
- Confirm viscometer type and bath compatibility before ordering
- Holder only, viscometer is not included unless specified separately
- Use under appropriate laboratory or educational supervision
Viscometer, Cannon-Fenske Type, for Transparent Liquids, BS/IP/CF, BORO 3.3 Glass
- Cannon-Fenske type viscometers for transparent liquids
- BS/IP/CF pattern glass viscometers
- Supplied without constant certificate
- Made from 3.3 borosilicate glass
- Autoclavable glass construction
- Suitable for viscosity and flow time experiments
- Available in sizes 25, 50, 100, 150, 200, 300, 350, 400, 450, 500 and 600
- Listed viscosity ranges from 0.5 to 20,000 mm²/sec
- Supplied as 1 piece per pack
- Useful for laboratory, student and training applications
- Handle carefully as precision laboratory glassware
- Confirm size, viscosity range and method requirements before ordering
Viscometer, Cannon-Fenske U-Tube Type, BORO 3.3 Glass, Calibrated at 40°C
- Cannon-Fenske U-tube viscometers for transparent liquids
- Supplied with constant certificate
- Listed as calibrated at 40°C
- Made from 3.3 borosilicate glass
- Autoclavable glass construction
- Suitable for transparent Newtonian liquids
- Commonly used for petroleum products and lubricants
- Listed for measurement according to ASTM D445 and ISO 3104
- Specifications listed as conforming to ASTM D446 and ISO 3105
- Available in sizes 25, 50, 75, 100, 150, 200, 300, 350, 400, 450, 500 and 600
- Minimum sample volume listed as 7 mL
- Use under appropriate laboratory or educational supervision
Viscometer, Cannon-Fenske, for Opaque Liquids, BORO 3.3 Glass
- Cannon-Fenske type viscometers for opaque liquids
- Listed for ASTM D445 viscosity testing applications
- Supplied without constant certificate
- Made from 3.3 borosilicate glass
- Autoclavable glass construction
- Suitable for viscosity and flow time experiments
- Available in sizes 100, 150, 200, 300, 350, 400, 450, 500 and 600
- Listed viscosity ranges from 3 to 20,000 mm²/sec
- Supplied as 1 piece per pack
- Useful for laboratory, student and training applications
- Handle carefully as precision laboratory glassware
- Confirm size, viscosity range and method requirements before ordering
Viscometer, Cannon-Fenske, for Opaque Liquids, BORO 3.3 Glass, Calibrated at 40°C
- Cannon-Fenske C/F viscometers for opaque liquids
- Supplied with constant certificate
- Listed as calibrated at 40°C
- Made from 3.3 borosilicate glass
- Autoclavable glass construction
- Suitable for dark Newtonian liquids
- Listed for kinematic viscosity measurement according to ASTM D445, ISO 3104 and ASTM D2170
- Available in sizes 100, 150, 200, 300, 350, 400, 450, 500 and 600
- Listed viscosity ranges from 3 to 20,000 mm²/sec
- Minimum sample volume listed as 12 mL
- Supplied as 1 piece per pack
- Use under appropriate laboratory or educational supervision
Viscometer, Cannon-Manning Type, BORO 3.3 Glass
- Cannon-Manning viscometers for laboratory and educational use
- Supplied with certificate
- Made from 3.3 borosilicate glass
- Autoclavable glass construction
- Suitable for viscosity and flow time experiments
- Available in sizes 11, 12 and 13
- Supplied as 1 piece per pack
- Useful for laboratory, student and training applications
- Suitable for compatible liquid viscosity demonstrations
- Handle carefully as precision laboratory glassware
- Confirm certificate type and method requirements before ordering
- Use under appropriate laboratory or educational supervision
Viscometer, Suspended Level, BORO 3.3 Glass, Calibrated at 40°C
- Suspended level viscometers for kinematic viscosity measurement
- Supplied with constant certificate
- Listed as calibrated at 40°C
- Made from 3.3 borosilicate glass
- Autoclavable glass construction
- Suitable for transparent Newtonian liquids
- Listed for measurement according to ASTM D445 and ISO 3104
- Specifications listed as conforming to ASTM D446 and ISO 3105
- Available in sizes 1, 1A, 2, 2A, 3, 3A, 4, 4A and 5
- Viscosity ranges listed from 2 to 100,000 mm²/sec
- Minimum sample volume listed as 11 mL
- Use under appropriate laboratory or educational supervision
Viscometer, Suspended Level, BS/IP/SL, BORO 3.3 Glass
- Suspended level BS/IP/SL viscometers for laboratory use
- Supplied without constant certificate
- Made from 3.3 borosilicate glass
- Autoclavable glass construction
- Suitable for viscosity and flow time experiments
- Available in sizes 1, 1A, 2, 2A, 3, 3A, 4, 4A and 5
- Listed viscosity ranges from 2 to 100,000 mm²/sec
- Supplied as 1 piece per pack
- Useful for student, training and teaching laboratory activities
- Handle carefully as precision laboratory glassware
- Confirm size, viscosity range and method requirements before ordering
- Use under appropriate laboratory or educational supervision
Viscometer, U-Tube Reverse Flow, BORO 3.3 Glass, Calibrated at 40°C
- Reverse flow U-tube viscometers for opaque liquids
- Supplied with constant certificate
- Listed as calibrated at 40°C
- Made from 3.3 borosilicate glass
- Autoclavable glass construction
- Suitable for opaque Newtonian liquids
- Listed for kinematic viscosity measurement according to ASTM D445 and ISO 3104
- Specifications listed as conforming to ASTM D446 and ISO 3105
- Available in sizes 2, 3, 4, 5, 6, 7, 8, 9, 10 and 11
- Listed viscosity ranges from 2 to 300,000 mm²/sec
- Minimum sample volume listed as 7 mL
- Use under appropriate laboratory or educational supervision
Viscometer, U-Tube Reverse Flow, BS/IP/RF, BORO 3.3 Glass
- Reverse flow U-tube BS/IP/RF viscometers for laboratory use
- Supplied without constant certificate
- Made from 3.3 borosilicate glass
- Autoclavable glass construction
- Suitable for viscosity and flow time experiments
- Available in sizes 2, 3, 4, 5, 6, 7, 8, 9, 10 and 11
- Listed viscosity ranges from 2 to 300,000 mm²/sec
- Supplied as 1 piece per pack
- Useful for laboratory, student and training applications
- Handle carefully as precision laboratory glassware
- Confirm size, viscosity range and method requirements before ordering
- Use under appropriate laboratory or educational supervision
Viscometer, Ubbelohde Type 501-20 II, 10–100 mm²/s, Calibrated BORO 3.3 Glass
- Ubbelohde type capillary viscometer for manual viscosity measurement
- Model listed as SI Analytics Ubbelohde 501-20 II
- Measured range listed as 10 to 100 mm²/s
- Maximum measured value listed as 100 mm²/s
- Minimum measured value listed as 10 mm²/s
- Viscometer constant listed as 0.1
- Capillary number listed as II
- Internal diameter listed as 1.13 mm
- Capacity listed as 15 to 20 mL
- Overall length listed as 290 mm
- Standards listed as ISO 3105 and DIN 51562
- Supplied as the selected calibrated viscometer only
Visking Dialysis Tubing, Laboratory Membrane Tubing for Diffusion Work
- Visking dialysis tubing for diffusion and osmosis demonstration work
- Made from seamless regenerated cellulose membrane material
- Supplied in practical 5 metre roll format
- Supports teaching of permeability, equilibrium, gradients, and plasmolysis
- Two size formats allow selection by supplied tubing dimensions
From AUD 134.50 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Volumetric Flask with PE Stopper, Class A, Borosilicate Glass (BORO 3.3)
- Class A tolerance for precision measurements
- Leak-resistant PE stopper ensures secure sealing
- Narrow neck design improves volumetric accuracy
- Used in titration, education, and research labs
- Preferred by professionals across Australia
- Made from LabChoice BORO 3.3 glass – High quality
From AUD 9.50 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Volumetric Flask with PE Stopper, Class B, Borosilicate Glass (BORO 3.3)
- Class B tolerance suitable for general lab use
- Leak-proof PE stopper provides secure closure
- Narrow neck ensures better volume control
- Used in school labs, research, and QC testing
- Preferred for everyday solution preparation
- Made from LabChoice BORO 3.3 glass – High quality
From AUD 6.90 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Volumetric Transfer Pipette, Class A, BORO 3.3
- Class A volumetric transfer pipette for precise fixed-volume liquid transfer
- Made from BORO 3.3 borosilicate glass for chemical and thermal resistance
- Designed for accurate measuring and dispensing in analytical laboratory work
- Suitable for education, research, quality control, and routine lab applications
- Clear calibration mark supports reliable volume reading and repeatable results
From AUD 5.90 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Vortex Mixer, Fixed Speed 3000 rpm Laboratory Mixing Type
- 3,000rpm for shaking to rapid mixing of samples
- Touch or continuous operation mode
- Includes a standard top head for mixing a single test tube or other small vessel up to 30mm in diameter
- Electronic speed control maintains constant speed even during changes in load
- Steel base with specially designed vacuum suction feet provides stability and dampens vibration
- Robust aluminum-cast construction
AUD 350.50 (Ex GST)
Save 30%
Vortex Mixer, Portable Laboratory Mixing Type up to 3000 rpm
- Compact , portable and fits nicelyon bench-top (erase desktops and table tops)
- Touch operation,Fixed speed of 3,000rpm for rapid mixing of samples
- Powerful and efficient 12V DC brushless motor is smooth operation and has long life
- Foot pad design secures the mixer in place and does not wobble during operation
AUD 225.00 (Ex GST)
Save 27%
Vortex Mixer, Variable Speed Laboratory Mixing Type up to 3000 rpm
- Variable speed of 0 to 3,000rpm for gentle shaking to rapid mixing of samples
- Touch or continuous operation mode
- Includes a standard top head for mixing a single test tube or other small vessel up to 30mm in diameter
- Electronic speed control maintains constant speed even during changes in load
- Steel base with specially designed vacuum suction feet provides stability and dampens vibration
- Robust aluminum-cast construction
AUD 275.50 (Ex GST)
Wall Mount Drying Rack, 39 Points, 790 × 580 mm
- Wall mount laboratory drying rack for glassware drying
- Coated wire construction for routine laboratory use
- Includes 39 drying points
- Suitable for drying test tubes, boiling tubes, conical flasks and beakers
- Approximate rack size listed as 790 × 580 mm
- 790 mm measurement includes the attachment hooks
- Mounting point distance listed as 500 mm horizontally
- Mounting point distance listed as 780 mm vertically
- Weight listed as 2.5 kg
- Helps organise washed laboratory glassware during drying
- Designed for wall mounting in suitable laboratory areas
- Use under appropriate laboratory or educational supervision
AUD 136.90 (Ex GST)
Warming Coil Adapter B24 Joint BORO 3.3 Glass Laboratory Grade
- Designed for gentle heating and temperature control in glassware setups
- Compatible with B24 standard joints for secure connections
- Facilitates even heat distribution during distillation or reaction processes
- Ideal for maintaining sample temperature and preventing condensation
- Made from durable, heat-resistant BORO 3.3 borosilicate glass
- Expertly manufactured and quality-tested by LabChoice Australia
AUD 89.90 (Ex GST)
Warming Coil Septa Support Adapter, BORO 3.3 Glass - Each
- Warming coil septa support adapter for laboratory glassware setups.
- Made from BORO 3.3 glass for chemical and thermal resistance.
- Supports controlled heating or warming around compatible assemblies.
- Septa support design allows use with suitable sampling or sealing points.
- Clear glass construction supports visual inspection during operation.
- Suitable for chemistry, research and teaching laboratory applications.
AUD 9.90 (Ex GST)
Warming Trays
- Warming trays for controlled heating of laboratory samples and vessels
- Suitable for gentle warming across a flat heated surface
- Supports use with bottles, containers, glassware, and lab items
- Practical benchtop format for routine laboratory workflows
- Suitable for research, education, and general laboratory applications
From AUD 1,254.00 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Wash Bottle with Fixed Straw, Leakproof, Material LDPE, High Quality - Each
- Fixed straw allows steady, upright dispensing
- Leakproof screw cap prevents accidental spills
- Flexible LDPE body for easy squeeze control
- Clear volume markings for accurate dispensing
- Ideal for solvents, distilled water, and lab rinsing
- Supplied by LabChoice Australia – Reliable quality
From AUD 2.70 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Wash Bottle with Flexible Straw, Leakproof, Material LDPE, High Quality - Each
- Flexible straw enables precise directional dispensing
- Leakproof cap prevents spills and contamination
- Soft LDPE body allows easy squeeze action
- Graduated for controlled volume use
- Suitable for rinsing, dispensing solvents, or water
- Supplied by LabChoice Australia – Reliable quality
From AUD 2.30 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Washable Adhesive Work Mat
- 60 x 60 mm and 332 x 166 mm sizes suit varied bench setups
- Double-sided adhesive supports placement on clean, dry, flat surfaces
- Helps keep containers, glassware and flat-bottomed flasks in place
- Washable surface can be wiped clean with a damp cloth to restore tack
- Reusable thousands of times for repeated laboratory holding support
- Can be trimmed to size for benches, trolleys and preparation areas
Watch Glasses, Soda Lime Glass, Laboratory Evaporation Cover Plates
- Manufactured from high quality soda lime glass for routine laboratory use
- Smooth, flat surface ideal for evaporation, sample observation, and small volume handling
- Commonly used as cover plates for beakers to reduce contamination and splashing
- Suitable for weighing solids, drying samples, and general laboratory handling
- Clear glass provides good visibility of samples during experiments
- Widely used in schools, universities, and routine laboratory applications
- Reliable laboratory-grade quality supplied by LabChoice Australia
From AUD 10.99 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Water Bath Temperature Controller for Hot Plate
- Thermostat control for compatible IEC water bath and hot plate setup
- Fits to the edge of the IEC water bath
- Controls the hot plate to help hold water temperature constant
- Thermostat element slides down into the inner corner of the bath
- Probe can remain submerged when only a small water volume is used
- Suitable for wet water bath temperature control
- Can also support dry bath operation where the method is suitable
- For dry use, probe should press against the inside face of the metal bath
- Provides better regulation than manual hot plate adjustment
- Purchased separately from the IEC water bath
AUD 236.90 (Ex GST)
Water Hardness Test Paper Strips, 50 Strip Pack
• Measures calcium carbonate water hardness quickly • Dual scale reading, ppm and grains per gallon • Calibrated from 0 to 500 ppm hardness • Fast hard or soft water assessment tool • Suitable for education and general water testing
AUD 59.90 (Ex GST)
Water Turbine Hydro-Electric Power Demo Spare Belt
- Replacement belt for water turbine hydro-electric power demo
- Suitable for LC-80-EM1639-01 demonstration apparatus
- Supports continued operation of classroom hydro-electric experiments
- Approximate belt diameter is 70 mm
- Spare belt only, main demonstration unit not included
- Useful for routine maintenance or belt replacement
- For laboratory or educational use under appropriate supervision
AUD 11.50 (Ex GST)
Water Turbine Hydro-Electric Power Educational Model
- Demonstrates hydro-electric power generation in classroom experiments
- Shows energy conversion from moving water to electrical output
- Suitable for renewable energy and sustainability lessons
- Helps teachers explain turbine-driven electricity generation
- Supports hands-on physics and environmental science activities
- Useful for group demonstrations and student observation
- For laboratory or educational use under appropriate supervision
AUD 216.90 (Ex GST)
Wave Demonstration Spring, Plastic Model for Physics
- Plastic spring for wave demonstration activities
- Lightweight design as listed
- Highly visible spring for classroom use
- Demonstrates waves in mid-air as listed
- Expands from 50 cm to 370 cm as listed
- Useful for transverse and longitudinal wave demonstrations
- Supports teaching of compression, rarefaction and wave motion
- Suitable for physics and general science practicals
- Practical for teacher-led classroom demonstrations
- Made from plastic as listed
- Keep clear of faces and eyes during stretching or release
- Use under appropriate laboratory or educational supervision
AUD 27.50 (Ex GST)
Weighing Measuring Scoop, BORO 3.3 Glass
- BORO 3.3 borosilicate glass weighing and measuring scoop for precise lab handling
- Suitable for transferring powders, crystals, and small solid samples
- Clear glass design allows easy visibility of sample quantity during use
- Good chemical resistance for routine laboratory weighing and preparation tasks
- Smooth formed surface helps with clean transfer and easy cleaning
- Reusable glass scoop for schools, universities, research, and industrial labs
- Ideal for sample prep, reagent handling, and general bench work in Australian laboratories
From AUD 14.90 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
didn't see what you are looking for ?
We’ll source it or make it for you. LabChoice supports your research every step.