Simple Wheel and Axle Pulley Set, Two Sizes Included 150 mm and 75 mm
- Wheel and axle apparatus for mechanical ratio and pulley demonstrations
- Includes two fixed pulley diameters: 150 mm and 75 mm
- Pulleys are made from strong 5-ply timber sealed against moisture
- Dual-diameter design supports comparison of radius, effort and load
- Central bearing allows free rotation on a strong 10 mm diameter rod
- Suitable for use with compatible cords and slotted weights
- Designed for supervised mechanics and classroom physics experiments
$89.90 (Ex GST)
Single Edge Razor Blades, Pack of 100
- Single edge razor blades for routine laboratory cutting tasks
- Supplied as a pack of 100 blades for classroom and lab stock use
- Suitable for trimming, slicing, scraping and preparation work
- Single edge format supports controlled manual cutting applications
- Useful for biology, microscopy, preparation room and teaching workflows
- Sharp blade product, use only with appropriate supervision and PPE
- Intended for laboratory and educational use, not personal grooming use
$27.50 (Ex GST)
Single Range Student Meters For Circuit
- Single range student meters for classroom circuit current measurement
- Designed to reduce scale confusion during practical electricity lessons
- Available across DC microamp, DC milliamp, AC amp and DC amp ranges
- Suitable for basic circuit work, current flow and component investigations
- Economical and durable design stated for repeated student handling
- Large viewing window supports clearer reading during group demonstrations
- Use within the stated range under appropriate supervision
From $43.90 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Single Range Student Volt Meters, AC and DC Voltage
- Single range student volt meters for classroom voltage measurement
- Available for AC and DC voltage experiments in teaching laboratories
- Designed to simplify reading during circuit analysis activities
- Range options include AC 0 to 25 V and DC 0 to 3 V, 0 to 10 V and 0 to 25 V
- 0 to 25 V models list scale increments of 0, 5, 10, 15, 20 and 25
- Accuracy is stated as approximately 2.0 to 2.5% for listed 0 to 25 V models
- Use within the stated voltage range under appropriate supervision
From $43.90 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Sloping Steam Distillation Heads BORO 3.3 Glass
- Restricted Item – An End User Declaration (EUD) must be completed. A valid photo ID (such as a Passport, Driver Licence, or Proof of Age Card) is also required. Orders will not be shipped until all documentation is received and approved.
- Designed for efficient steam distillation with improved condensate flow control
- Sloping head geometry helps reduce liquid hold-up and improves separation efficiency
- Suitable for essential oil extraction, organic chemistry distillation, and teaching laboratories
- Precision ground joints ensure secure, leak-resistant connections with standard lab glassware
- Durable, heat and chemical resistant construction for repeated high-temperature use
- Made from LabChoice BORO 3.3 glass – High quality, supplied by LabChoice Australia
Soxhlet Extraction Set with Allihn Condenser BORO 3.3 Glass
- Soxhlet extraction set for continuous solvent extraction of soluble compounds
- Made from BORO 3.3 borosilicate glass for chemical and thermal resistance
- Includes Allihn condenser to support efficient vapour condensation and reflux
- Suitable for extraction work in chemistry, research, education, and analytical laboratories
- Designed for controlled heating, solvent cycling, and repeatable extraction procedures
- Durable laboratory glassware construction supports reliable routine use in Australian labs
$499.90 (Ex GST)
Spare Bell for Bell Jar Experiment Kit
- Replacement bell for Bell Jar Experiment Kit
- Suitable for LC-80-MS0019-01 experiment kit
- Used for sound in vacuum demonstrations
- Bell diameter stated as 60 mm
- Overall dimensions stated as approximately 130 mm × 85 mm
- Bell jar kit, vacuum plate and pump are not included
- For laboratory or educational use under appropriate supervision
$26.50 (Ex GST)
Spare Pestles, Replacement Pestles for Glass and Porcelain Mortars
- Spare pestles for replacing damaged or misplaced mortar pestles
- Suitable for use with compatible glass and porcelain mortars
- Options listed for 100 mL, 300 mL, 500 mL and 1000 mL mortars
- Additional option listed for 60 mm glass mortar compatibility
- Pestle length is stated as approximately 100 mm across the listed options
- Supports grinding, mixing and crushing tasks in laboratory workflows
- For laboratory or educational use only under appropriate supervision
From $2.50 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Spectrum Tube EHV Unit and Tube Support, Without Tubes
- EHV power supply unit for compatible spectrum discharge tubes
- Supplied with tube support for holding different spectrum tube lengths
- Self-contained unit designed to operate from 240 V AC mains power
- Deep recessed high-voltage socket supports direct tube connection
- Stainless steel rod and sliding clamp support tube positioning
- Removable mains cable supports practical setup and storage
- High-voltage apparatus for supervised educational use only
$422.50 (Ex GST)
Spectrum Tubes 208 mm Length, Set of 6
- Set of 6 spectrum tubes for spectroscopy and discharge demonstration work
- Includes hydrogen, mercury, helium, nitrogen, neon and argon tubes
- Bright discharge supports clear classroom observation of spectral lines
- Each tube has a stated size of 208 mm overall length × 12 mm diameter
- Supplied in a foam case for organised storage and handling
- Designed for use with a compatible spectrum tube EHV power unit
- For supervised laboratory or educational use with suitable high-voltage safety
$254.90 (Ex GST)
Spring Balance Newton Meters, Cylindrical, 1 N to 100 N
- Cylindrical spring balance range for force measurement demonstrations
- Also known as Newton meters for physics and educational use
- Colour coded by range to support quick classroom identification
- Measures force in gram and Newton ranges from 100 g or 1 N to 10,000 g or 100 N
- Selected models include stated gram scale divisions for practical readings
- Suitable for basic force, weight, spring and accelerometer activities
- Designed for supervised laboratory, classroom and educational use
From $13.90 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Spring Balance Newton Meters, Plastic and Aluminium, 1 N to 50 N
- Plastic and aluminium spring balances for direct force measurement
- Also known as Newton meters for physics and educational use
- Range options cover 100 g or 1 N through to 5000 g or 50 N
- Gram division steps range from 2 g to 50 g by model
- Suitable for pulling force, load change and spring extension activities
- Useful for basic force, motion and accelerometer-style demonstrations
- Designed for supervised laboratory, classroom and practical use
From $9.50 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Square Plate Magnetic Stirrer, Brushless DC Motor, up to 1.5 L Capacity
- Compact small-footprint design with 12 V operation for mobile lab use.
- Square work plate supports up to 1.5 L stirring capacity for routine mixing.
- Holder with clamp accommodates a pH electrode or other laboratory sensor.
- PET top plate provides excellent chemical resistance for daily laboratory work.
- Colourful stickers allow simple DIY identification and workspace customisation.
- Maintenance-free brushless DC motor supports reliable and low-noise stirring.
$98.00 (Ex GST)
Stainless Steel Probe, Double Ended 14 cm Fine Point
- Double-ended stainless steel probe for routine laboratory use
- 14 cm length supports practical handling and fine manipulation
- 1.5 mm tip on each end for accurate probing and positioning
- Two-ended design allows continued use by rotating the tool
- Suitable for small sample handling, alignment and demonstration work
- Stainless steel construction provides a rigid reusable probe format
- For laboratory or educational use only under appropriate supervision
$1.90 (Ex GST)
Stainless Steel Scalpel Handles for Dissection
- Stainless steel scalpel handle range for laboratory and educational use
- Available in No. 3 and No. 4 handle options
- Material listed as AISI 410 grade stainless steel
- No. 3 handle is listed for use with #10 to #15 scalpel blades
- Provides secure blade-to-handle fit where compatible blades are used
- Reusable handle format for compatible disposable scalpel blades
- Suitable for dissection, biology teaching and laboratory preparation work
- Confirm blade compatibility before ordering or use
- Blades are not included unless specified separately
- Use only under appropriate laboratory or teacher supervision
From $4.50 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Standard Mini Rollers, 6 and 11 Roller Options
- Mini roller for liquid mixing, cell culture and hybridisation workflows
- Available in 6-roller and 11-roller configurations
- Variable roller speed from 0.5 to 80 rpm
- Suitable for benchtop, standard incubator and CO₂ incubator use
- Anti-corrosive and wear-resistant construction for humid environments
- Supports tubes and bottles up to maximum Ø120 mm
- Supplied with O-rings in two stated sizes for setup support
From $2,070.00 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Steam Distillation Kit For Oil Essential, BORO 3.3
- Steam distillation kit for extracting essential oils from botanical material using steam separation
- BORO 3.3 borosilicate glass for strong thermal performance and chemical resistance in routine lab use
- Supports clean collection of volatile oil fraction and hydrosol during distillation runs
- Suitable for teaching demonstrations, R&D trials, and small-scale essential oil workflows
- Designed for repeatable setup, easy cleaning, and reliable results across distillation cycles
From $648.90 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Straight Splash Heads Adapter for Distillation Assemblies, BORO 3.3 Glass
- Restricted Item – EUD Required: an End User Declaration (EUD) must be completed. A valid photo ID (such as a Passport, Driver Licence, or Proof of Age Card) is also required. Orders will not be shipped until all documentation is received and approved.
- Straight splash head adapter designed for efficient vapour control in distillation assemblies
- Helps prevent liquid carryover while maintaining smooth vapour flow
- Suitable for simple distillation and reflux laboratory setups
- Compatible with standard laboratory flasks and condensers
- Manufactured for thermal and chemical resistance in routine lab use
- Made from LabChoice BORO 3.3 glass – High quality, supplied by LabChoice Australia
From $40.50 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Student Flame Spectrometer for Emission and Atomic Absorption
- Student spectrometer for flame emission, atomic absorption and colourimetry
- Designed for classroom teaching, demonstration and supervised practical work
- Can be used with or without a computer for flexible lesson setup
- Includes air and gas controls for sample atomisation and burner operation
- Supplied with nebuliser, all cables and Windows-based software
- RS232 connection supports computer use with compatible systems
- Atomic absorption work normally requires a sodium light source, not supplied
$2,025.50 (Ex GST)
Student Gyroscope Kit for Inertia and Precession
- Student gyroscope for rotational motion, inertia and precession demonstrations
- Well-balanced solid metal rotor supports clear gyroscopic stability observation
- Adjustable free-running bearings support smooth classroom operation
- Runs for more than two minutes from a single cord-pull start
- 175 g rotor with stated moment of inertia about 2 × 10⁻⁵ kg·m²
- Supplied with gimbals, pivoting housing, two stands, cord and handle
- Suitable for supervised mechanics and physics teaching demonstrations
$47.50 (Ex GST)
Student Triple Range DC Ammeter, Classroom Current Meter
- Triple range DC ammeter for classroom current measurement
- Measures current across three selectable ranges in one instrument
- Available in 0 to 100 mA / 0 to 500 mA / 0 to 1 A configuration
- Available in 0 to 50 mA / 0 to 500 mA / 0 to 5 A configuration
- Brass threaded binding post terminals suit 4 mm banana plugs
- External zero adjust supports pointer setting before measurement
- Economical and durable design stated for repeated student use
From $43.90 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Student Triple Range DC Voltmeter, Physics Lab Voltage Teaching Meter
- Triple range student DC voltmeters for classroom voltage measurement
- Three selectable voltage ranges support varied circuit experiments
- Suitable for circuit analysis, Ohm’s Law and DC polarity teaching
- Accuracy is stated as ±2.5% of full scale
- Dimensions are stated as 133 × 97 × 100 mm
- Weight is stated as 0.3 kg for practical bench and classroom use
- Use within the selected voltage range under appropriate supervision
From $43.90 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Superconductivity Kit, Complete Set
- Complete kit for classroom superconductivity demonstrations
- Includes petri dish, magnet, superconductivity disc, forceps and instruction book
- Spare superconductivity disc option available for replacement use
- Spare magnet option supports continued kit maintenance
- Disc size is 29 mm diameter × 2.9 mm thick
- Disc lifespan depends on correct handling, drying and humidity control
- Suitable for supervised classroom and laboratory demonstration use
From $18.90 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Surgical Blades, Laboratory Cutting Blade Range Pack of 100
- Surgical blade pack for laboratory and educational cutting tasks
- Supplied as a pack of 100 pieces for lab and classroom stock use
- Single-use blade format supports controlled preparation workflows
- Suitable for supervised trimming, cutting and sample preparation tasks
- Sterility is not guaranteed if the packet is broken
- Extremely sharp blades, handle carefully with suitable PPE
- Intended for laboratory or educational use under appropriate supervision
From $27.50 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
TC Treated Cell Culture Flasks, Sterile Culture Surface Range for Routine Cell Work
- TC treated cell culture flasks for routine adherent cell culture workflows
- Growth area options include 25 cm², 75 cm² and 175 cm²
- Flask volume options include 50 mL, 250 mL and 750 mL
- Cap options include plug seal cap and vent cap formats
- 25 cm² sealed cap option has recommended medium volume of 5 to 7.5 mL
- 25 cm² sealed cap option is supplied as pack 10, case 200
- Suitable for research, teaching and routine cell culture laboratory use
From $168.50 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Teaching Stethoscope, Single Head, Single Diaphragm
- Teaching stethoscope for nursing student training and healthcare education
- Single head and single diaphragm format supports straightforward learning
- Aluminium chestpiece has a stated diameter of 4.7 cm
- Aluminium earhooks have a stated length of 17 cm
- PVC tube has a stated length of 60 cm for practical student handling
- Full stethoscope length is stated as 75 cm
- Suitable for supervised classroom demonstration and basic listening practice
$22.50 (Ex GST)
Test Tube Holder, Wooden Peg Type, 180 mm Long
- Wooden peg type test tube holder for routine laboratory use
- Holds compatible test tubes up to 20 mm diameter
- 180 mm length provides practical reach during tube handling
- Peg style design supports simple manual gripping of test tubes
- Wooden construction provides a lightweight reusable holder format
- Suitable for classroom demonstrations and preparation room use
- For supervised laboratory and educational use only
$3.50 (Ex GST)
Test Tube Rack Aluminium, High Quality
- Aluminium test tube rack for laboratory tube holding
- High quality construction for routine laboratory use
- Lightweight rack format for practical bench handling
- Suitable for organising compatible test tubes during workflows
- Supports upright tube placement on laboratory benches
- Practical for teaching, research and routine sample preparation
- Confirm tube diameter, rack capacity and cleaning suitability before use
Test Tube Rack Stainless Steel, High Quality
- Stainless steel test tube rack for laboratory tube holding
- High quality construction for routine laboratory use
- Suitable for organising compatible test tubes during workflows
- Supports upright tube placement on laboratory benches
- Practical for teaching, research and routine sample preparation
- Easy to clean using suitable laboratory cleaning procedures
- Confirm tube diameter, rack capacity and chemical compatibility before use
Test Tube Racks, Polypropylene 24 Holes for 25 mm Tubes Laboratory Type
- Polypropylene test tube racks for organised holding of 25 mm tube types
- 24-hole layout supports routine tube handling in laboratories and classrooms
- 3 × 8 row design helps keep test tubes stable and easy to access
- Colour options include red, blue, white and green for simple bench organisation
- Overall rack size is stated as 250 × 105 × 70 mm across the listed variations
- Suitable for preparation, observation, handling and short-term bench organisation tasks
- Blue variation is listed as self assembly for practical laboratory setup
From $8.90 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Test Tube Racks, Polypropylene 40 Holes for 20 mm Tubes Laboratory Type
- Polypropylene test tube racks for organised holding of compatible 20 mm tubes
- 40-hole layout supports routine tube handling in laboratories and classrooms
- 4 × 10 row design helps keep tubes upright, separated and easy to access
- Colour options include red, blue, white and green for simple bench organisation
- Suitable for preparation, observation, sorting and short-term bench storage tasks
- Practical rack design supports stable tube arrangement during daily laboratory use
- Blue variation is listed as self assembly for practical laboratory setup
From $8.90 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Test Tube Racks, Polypropylene 60 Holes for 16 mm Tubes Laboratory Type
- Polypropylene test tube racks for organised holding of compatible 16 mm tubes
- 60-hole layout supports routine tube handling in laboratories and classrooms
- 5 × 12 row design helps keep tubes upright, separated and easy to access
- Colour options include red, blue, white, yellow and green for bench organisation
- Suitable for preparation, observation, sorting and short-term bench storage tasks
- White variation has a stated overall size of 250 × 106 × 68 mm
- Blue variation is listed as self assembly for practical laboratory setup
From $8.90 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
didn't see what you are looking for ?
We’ll source it or make it for you. LabChoice supports your research every step.