Autoclave Bags 121°C Natural Printed, 50 µm, Medium, 700 x 550 mm, Pack of 50 / Ctn of 250
- Autoclave bags made from high-quality virgin HDPE material
- Heat resistant for compatible autoclave use up to 121°C
- Printed with biohazard logo for clear laboratory waste identification
- Natural colour bag with 50 µm thickness
- Medium size listed as 700 x 550 mm
- Supplied as pack of 50, with carton quantity of 250
AUD 95.00 (Ex GST)
Autoclave Bags 121°C Natural Printed, 50 µm, Small, 630 x 270 mm, Pack of 50 / Ctn of 500
- Autoclave bags made from high-quality virgin HDPE material
- Heat resistant for compatible autoclave use up to 121°C
- Printed with biohazard logo for clear laboratory waste identification
- Natural colour bag with 50 µm thickness
- Small size listed as 630 x 270 mm
- Supplied as pack of 50, with carton quantity of 500
AUD 99.00 (Ex GST)
Autoclave Bags 121°C Natural Printed, Medium, 700 x 550 mm, Pack of 50 / Ctn of 250
- Medium autoclave bag format for routine laboratory waste collection workflows
- 121°C heat resistance supports compatible sterilisation preparation before disposal
- Natural colour design suits general laboratory waste-handling applications
- Virgin HDPE construction supports practical strength during regular handling
- 700 x 550 mm size offers balanced capacity for bench, prep-room and lab use
- Pack of 50 / carton of 250 supports planned stock control and replenishment
AUD 122.00 (Ex GST)
Autoclave Bags 121°C Natural Printed, Small, 630 x 270 mm, Pack of 50 / Ctn of 500
- Small autoclave bag format for bench-side and low-volume laboratory waste collection
- 121°C heat resistance supports compatible autoclave sterilisation workflows
- Natural colour design suits routine laboratory waste-handling applications
- Virgin HDPE construction supports dependable handling during daily lab use
- 630 x 270 mm size is practical for compact collection points and preparation areas
- Pack of 50 / carton of 500 supports bulk replenishment for laboratories and schools
AUD 84.00 (Ex GST)
Autoclave Bags 121°C Yellow Printed, 50 µm, Large, 910 x 720 mm, Pack of 50 / Ctn of 250
- Large autoclave bag format supports higher-capacity laboratory waste collection workflows
- Yellow printed design helps improve visibility at controlled waste collection points
- Virgin HDPE material supports dependable handling before compatible autoclave processing
- 121°C heat resistance suits routine sterilisation preparation in laboratory environments
- 50 µm thickness provides practical flexibility for day-to-day waste handling
- 910 x 720 mm size, supplied as pack of 50 / carton of 250 for planned replenishment
AUD 133.00 (Ex GST)
Autoclave Bags 121°C Yellow Printed, 50 µm, Medium, 700 x 550 mm, Pack of 50 / Ctn of 250
- Made from high-quality virgin HDPE material
- Heat resistant for compatible autoclave use up to 121°C
- Yellow colour format for visible laboratory waste segregation
- Printed with biohazard logo for clear waste identification
- 50 µm thickness for practical laboratory handling
- Medium size 700 x 550 mm, supplied as pack of 50 / carton of 250
AUD 95.00 (Ex GST)
Autoclave Bags 121°C Yellow Printed, 50 µm, Small, 630 x 270 mm, Pack of 50 / Ctn of 500
- Small autoclave bag format suits bench-side collection and lower-volume laboratory waste workflows
- Yellow printed design improves visibility for controlled waste segregation areas
- Virgin HDPE construction supports dependable handling before compatible autoclave processing
- 121°C heat resistance supports routine sterilisation preparation in laboratory environments
- 50 µm thickness provides practical flexibility for daily waste-handling use
- 630 x 270 mm size, supplied as pack of 50 / carton of 500 for bulk replenishment
AUD 98.00 (Ex GST)
Autoclave Bags 121°C Yellow Printed, 50 µm, XL, 1220 x 860 mm, Pack of 25 / Ctn of 100
- Made from high-quality virgin HDPE material
- Heat resistant for compatible autoclave use up to 121°C
- Yellow colour format for visible laboratory waste segregation
- Printed with biohazard logo for clear waste identification
- 50 µm thickness for practical laboratory handling
- XL size 1220 x 860 mm, supplied as pack of 25 / carton of 100
AUD 85.00 (Ex GST)
Autoclave Bags 131°C Natural Printed, 80 µm, Medium, 700 x 550 mm, Pack of 50 / Ctn of 250
- Higher 131°C rating supports more demanding compatible autoclave waste workflows
- 80 µm virgin HDPE construction provides added handling strength for routine laboratory waste loads
- Medium 700 x 550 mm format suits preparation areas, bench-side bins and shared lab spaces
- Natural printed design supports visible waste identification without heavy colour coding
- Biohazard logo helps separate controlled laboratory waste from general disposal streams
- Pack of 50 / carton of 250 supports regular replenishment for schools, labs and testing facilities
AUD 152.00 (Ex GST)
Autoclave Bags 131°C Natural Printed, 80 µm, Small, 630 x 270 mm, Pack of 25 / Ctn of 100
- Made from high-quality virgin HDPE material
- Heat resistant for compatible autoclave use up to 131°C
- Natural colour format for routine laboratory waste workflows
- Printed with biohazard logo for clear waste identification
- 80 µm thickness for stronger laboratory handling
- Small size 630 x 270 mm, supplied as pack of 25 / carton of 100
AUD 100.00 (Ex GST)
B.S.S. Viscometers, Autoclavable BORO 3.3 Glass
- B.S.S. glass viscometers for laboratory and educational use
- Made from 3.3 borosilicate glass
- Autoclavable glass construction
- Suitable for viscosity and flow time experiments
- Useful for student, training and teaching laboratory activities
- Available B.S.S. No. 1, 2, 3 and 4
- Supplied as 1 piece per pack
- Suitable for school, university and teaching laboratory use
- Handle carefully as precision laboratory glassware
- Confirm method, liquid compatibility and cleaning procedure before use
- Stand, clamp, timer and bath are not included unless specified separately
- Use under appropriate laboratory or educational supervision
Banana Plugs, 4mm
- Banana plug accessories for laboratory and teaching circuit connections
- Supports use with meters, power supplies and experiment boards
- 2 mm plug to 4 mm socket adaptor links different connector systems
- 4 mm stackable banana plugs support plug-through circuit connections
- Three wire termination methods support flexible cable attachment
- Colour options help with polarity marking and circuit identification
- Suitable for supervised electrical and electronics teaching setups
From AUD 5.50 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Banana Plugs, 4mm Laboratory Type
- 4 mm banana sockets for building connection points in educational circuits, lab panels and experiment boards
- Pack quantity stated as 10 sockets per option, supports class sets, repairs and bench spares for frequent practical use
- Colour options black, blue, green, red and yellow support polarity marking and clear circuit identification
- Compatible with standard 4 mm banana plugs commonly used on meters, power supplies and teaching equipment
- Suitable for laboratory or educational environments where repeated plug in connections are required, select colour coding to match wiring conventions and reduce setup errors
From AUD 14.50 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Bare Copper Wire, Standard Wire Gauge Electrical Reel Range
- Bare copper wire designed for laboratory electrical experiments, physics demonstrations and general-purpose applications
- Available in nine Standard Wire Gauge (SWG) sizes from 14 SWG to 30 SWG
- Copper wire diameters ranging from 0.31 mm to 2.0 mm
- Uninsulated copper construction suitable for electrical conductivity investigations
- Supplied in 125 g reels across all nine gauge sizes
- Additional 500 g roll available in 18 SWG
- 16 SWG wire measures approximately 6.75 metres per 125 g reel
- 18 SWG wire measures approximately 11.75 metres per 125 g reel
- Suitable for electrical circuits, electromagnetism demonstrations and wire resistance experiments
- Copper provides high electrical and thermal conductivity
- Different wire gauges support investigations of conductor diameter and electrical resistance
- Ideal for physics, electrical science, research and educational laboratories
From AUD 21.50 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Basic Electronics Kit with Links and Signal Generator
- IEC Basic Electronics Kit for laboratory and educational use
- Designed for practical electronics and electrical circuit experiments
- Individually housed electronic components for organised circuit assembly
- Uses 2 mm banana plug connections for compact circuit arrangements
- Supports 4 mm connections using suitable adaptors where required
- Includes short connecting links to minimise loose wiring
- Components engage with a back panel for logical circuit construction
- Includes mini regulated power supply and mini signal generator
- Operates using a compatible 12 V PlugPak power source
- Supplied in a strong carry case with an experiment book
- Suitable for school, university and technical electronics teaching
AUD 1,153.50 (Ex GST)
Basic Solar Education Kit in Jar
- Basic solar education kit for science and STEM learning
- Supplied in jar for compact classroom storage
- Includes motor for motion demonstrations
- Includes solar cell for solar energy activities
- Includes wire for simple circuit connection
- Includes fan for mechanical output demonstration
- Includes buzzer for sound output demonstration
- Includes lamp for light output demonstration
- Useful for teaching solar energy and energy conversion
- Suitable for school, university and teaching laboratory use
- Confirm circuit layout and component compatibility before use
- Intended for laboratory or educational settings only
AUD 34.90 (Ex GST)
Basket with Adaptor for Low-Speed Multi-Rotor Centrifuge, 10-15 mL Tubes
- Basket with adaptor for compatible low-speed multi-rotor centrifuge systems
- Supports 10-15 mL tube use based on the supplied product information
- Suitable for compatible swing-out rotor configurations where a matching basket and adaptor setup is required
- Helps laboratories configure supported tube placement within a swing-out rotor basket system
- Suitable for routine clinical sample handling, general laboratory preparation and low-speed separation workflows
- Useful for laboratories working with 10-15 mL tube formats in compatible centrifuge rotor setups
- Rotor compatibility, basket fit, adaptor setup and approved tube size should be confirmed before use
Basket with Adaptor for Low-Speed Multi-Rotor Centrifuge, 100 mL Tubes
- Basket with adaptor for compatible low-speed multi-rotor centrifuge systems
- Supports 100 mL tube use based on the supplied product information
- Suitable for compatible swing-out rotor configurations where a matching basket and adaptor setup is required
- Helps laboratories configure supported 100 mL tube placement within a swing-out rotor basket system
- Suitable for routine sample handling, general laboratory preparation and low-speed separation workflows
- Useful for laboratories working with 100 mL tube formats in compatible centrifuge rotor setups
- Rotor compatibility, basket fit, adaptor setup and approved tube size should be confirmed before use
Basket with Adaptor for Low-Speed Multi-Rotor Centrifuge, 3-7 mL Tubes
- Basket with adaptor for compatible low-speed multi-rotor centrifuge systems
- Suitable for compatible swing-out rotor configurations where a matching basket and adaptor setup is required
- Supports 3-7 mL tube use based on the supplied product information
- Helps laboratories configure tube support within a swing-out rotor basket system
- Suitable for clinical sample handling, general laboratory preparation and low-speed separation workflows
- Useful for routine centrifugation where 3-7 mL tubes need supported placement in compatible rotor setups
- Rotor compatibility, basket fit, adaptor setup and approved tube size should be confirmed before use
Basket with Adaptor for Low-Speed Multi-Rotor Centrifuge, 50 mL Tubes
- Basket with adaptor for compatible low-speed multi-rotor centrifuge systems
- Supports 50 mL tube use based on the supplied product information
- Suitable for compatible swing-out rotor configurations where a matching basket and adaptor setup is required
- Helps laboratories configure supported 50 mL tube placement within a swing-out rotor basket system
- Suitable for routine sample handling, general laboratory preparation and low-speed separation workflows
- Useful for laboratories working with 50 mL tube formats in compatible centrifuge rotor setups
- Rotor compatibility, basket fit, adaptor setup and approved tube size should be confirmed before use
Battery Holder for 2 × 1.5 V AA Cells
- Battery holder designed for 2 × 1.5 V AA cells
- Suitable for laboratory and educational circuit experiments
- Holds batteries securely during demonstrations and student projects
- Provides a practical power source connection point for simple circuits
- Useful for low-voltage experiments with lamps, buzzers, motors and switches
- Supports introductory electricity and electronics activities
- Helps reduce loose battery connections during classroom use
- Suitable for school, university and STEM teaching environments
- Confirm polarity and circuit requirements before use
- Batteries are not included unless specified separately
- Avoid short circuits, overheating and incorrect battery installation
- Use under appropriate laboratory or educational supervision
AUD 1.90 (Ex GST)
Battery Holders for D Cells with 4 mm Terminals
- Battery holders for 1.5 V D cell batteries
- Available for 1, 2, 3 or 4 D cell configurations
- Fitted with 4 mm terminals for classroom circuit connection
- Suitable for laboratory and educational circuit experiments
- Helps hold batteries securely during demonstrations and student projects
- Provides a practical power source connection point for compatible circuits
- Useful for lamps, buzzers, motors, switches and low-voltage investigations
- 4-cell holder is listed with 1.5 V, 3 V, 4.5 V and 6 V output options
- 4-cell holder has listed size of 190 × 122 × 16 mm
- Batteries are not included unless specified separately
- Confirm polarity, voltage and circuit requirements before use
- Use under appropriate laboratory or educational supervision
From AUD 11.50 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Battery Hydrometer Acid Tester, High Quality
- Battery hydrometer acid tester for laboratory and workshop use
- Designed for checking battery acid specific gravity
- Measuring range listed as 1.10 to 1.30
- Brand listed as Thimson
- Boxed complete set as listed
- Includes glass tube as listed
- Includes rubber bulb as listed
- Includes hydrometer as listed
- Useful for compatible lead-acid battery electrolyte testing
- Helps indicate relative electrolyte density during battery checks
- Battery acid is corrosive and requires suitable PPE
- Use under appropriate laboratory or technical supervision
AUD 24.50 (Ex GST)
Baumé Hydrometer Brannan for Liquid Density Measurement, 305 mm
- Brannan Baumé hydrometer for laboratory and industrial liquid testing
- Designed for measuring liquids with specific gravity greater than water
- Baumé scale range listed as 0–70° Bé
- Overall hydrometer length of 305 mm
- Zero degrees Baumé corresponds to specific gravity of 1.000 at 60/60°F
- Manufactured in the United Kingdom by Brannan
- Part of Brannan's Twaddle and Baumé hydrometer range
- UKAS or traceable calibration certificates available upon request
- Suitable for liquid density and concentration monitoring applications
- Ideal for chemistry, research, quality control and industrial laboratories
AUD 78.90 (Ex GST)
Baumé Hydrometer Brannan for Measuring Liquids Heavier than Water
- Brannan Baumé hydrometers designed for measuring liquids heavier than water
- Available in 250 mm lengths with different measurement ranges
- Four variations covering 0–10, 10–20, 0–30 and 0–50° Baumé
- Zero degrees Baumé corresponds to a specific gravity of 1.000 at 60/60°F
- Manufactured in the UK by Brannan
- Part of Brannan's established Twaddle and Baumé hydrometer range
- Suitable for laboratory density measurement and quality control applications
- Optional UKAS or traceable calibration certificates available on request
- Designed for chemistry, research, industrial and educational laboratory use
From AUD 78.90 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Beaker Cleaning Brush, Nylon Bristles, 400 mm Length
- Beaker cleaning brush for laboratory glassware cleaning
- Suitable for cleaning beakers and similar wide laboratory vessels
- Nylon bristles for routine cleaning applications
- Bristle section listed as approximately 150 mm long
- Bristle width listed as approximately 80 to 85 mm
- Overall brush length listed as approximately 400 mm
- Metal wire handle for controlled manual cleaning
- White bristle colour
- Useful for school, university and general laboratory use
- Confirm vessel size and cleaning compatibility before use
- Avoid excessive force when cleaning glassware
- Use under appropriate laboratory or educational supervision
AUD 4.90 (Ex GST)
Beaker Polypropylene, Autoclavable, Excellent Clarity & Chemical Resistance
- Exceptional chemical resistance for versatile use
- Crystal-clear polypropylene ensures easy visibility
- Graduated markings for quick volume checks
- Autoclavable and reusable for cost-effective use
- Lightweight, unbreakable alternative to glass
- Supplied by LabChoice Australia – High performance
From AUD 2.50 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Beaker Polypropylene, Blue Printed Graduation, Autoclavable Lab Beaker, High Quality
- Made from premium polypropylene – shatterproof
- Blue printed graduations for easy readability
- Autoclavable – withstands repeated sterilization
- Chemical resistant for acids, bases, and solvents
- Available in 7 sizes from 50 ml to 5000 ml
- Supplied by LabChoice Australia – Reliable quality
From AUD 2.50 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Beehive Shelf Porcelain, for Gas Collection
- Porcelain beehive shelf designed for gas collection experiments in chemistry laboratories
- Available in two diameters: 75 mm and 100 mm
- Manufactured from porcelain for routine laboratory applications
- Used to support inverted gas jars or receiving tubes during gas collection over water
- Designed for use with compatible laboratory pneumatic troughs
- Raised support arrangement allows gas to enter the receiving vessel through water displacement
- Suitable for collecting gases that are sufficiently insoluble in water
- Provides stable support for compatible gas collection vessels
- Reusable porcelain construction for repeated laboratory experiments
- Suitable for studying gas preparation, collection and displacement methods
- Ideal for chemistry, research and educational laboratories
From AUD 5.90 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
BeeSpi V Photogate Holder, Adjustable Height and Angle
- Holder accessory for compatible BeeSpi V photogate use
- Designed to hold the photogate firmly during classroom experiments
- Adjustable height supports different apparatus and motion setups
- Adjustable angle supports slope, cart and free fall investigations
- Useful for timing, motion and mechanics demonstrations
- BeeSpi V photogate is sold separately as specified
- Suitable for supervised laboratory and educational use
AUD 93.50 (Ex GST)
BeeSpi V Photogate, Battery Operated Speed Measurement Type
- Easy-to-use photogate for speed measurement in physics experiments
- Suitable for free fall, cart motion and projectile velocity demonstrations
- Two parallel photogates detect objects passing through the sensing area
- Measures and displays speeds from zero to 99.99 km/h
- Measurement units include cm/s and km/h for classroom comparison
- Stores up to 5 measurements at a time for practical data review
- Operates with 2 × AAA batteries, not included
AUD 143.50 (Ex GST)
Bell Jar and Electric Bell Vacuum Experiment Kit
- Complete bell jar and ringer kit for sound in vacuum demonstrations
- Includes glass bell jar, vacuum plate with valve and rubber seal
- Supplied with battery-operated electric bell and instructions
- Demonstrates that sound becomes fainter as air is removed
- Bell can be removed for other suitable vacuum experiments
- Electric vacuum pump, tubing and 2 × AA batteries are not included
- For laboratory or educational use under appropriate supervision
AUD 211.90 (Ex GST)
didn't see what you are looking for ?
We’ll source it or make it for you. LabChoice supports your research every step.