Top Cup for Infrared Digital Vortex Mixture
- Top Cup for Infrared Digital Vortex Mixer accessory use
- Designed for compatible infrared digital vortex mixer units
- Helps support tube or small vessel contact during mixing
- Suitable as a spare or replacement vortex mixer component
- Supports routine sample agitation and quick laboratory mixing
- Useful for labs, schools, universities and testing environments
AUD 18.50 (Ex GST)
Top Cup for Digital Vortex Mixer
- Replacement top cup for compatible digital vortex mixers
- Supports routine sample mixing and vortexing workflows
- Helps provide stable contact during mixer operation
- Useful accessory for maintaining vortex mixer performance
- Suitable for laboratory, education, and testing environments
- Supplied by LabChoice Australia for lab equipment support
AUD 18.50 (Ex GST)
Tri-Mode Signal Generator, Power Supply and Amplifier
- Three-in-one teaching instrument for electronics experiments
- Includes regulated ±1.2 to 20 V DC power supply
- DC power supply output is stated as 250 mA
- Signal generator frequency range is stated as 0.1 Hz to 100 kHz
- High power signal generator output is stated as 0.5 A
- Includes audio amplifier with high and low sensitivity inputs
- Provides oscilloscope output and internal speaker
AUD 1,023.90 (Ex GST)
Triangular Prisms, Acrylic and Glass Optics Experiment Type
- Triangular prisms in acrylic and glass for optics experiments, supports refraction, dispersion and light path demonstrations
- Acrylic giant prisms listed in equilateral and 45-45-90 isosceles formats, lightweight and impact resistant for classroom use
- Glass options include 30-60-90, equilateral 60-60-60 and right angle 90-45-45 geometries, supports varied optics setups
- Double extra flint option listed 25 mm, 60 degree with RI 1.65, supports refractive material comparison work
- Choose prism material, geometry and size to match beam visibility, handling needs and experiment objectives
From AUD 6.50 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Tripod Stand Round Cast Iron, Heat-Resistant and Durable - 125 x 200 mm
- Round cast iron top for balanced support
- 125 mm surface diameter suits common labware
- 200 mm height ideal for Bunsen burner clearance
- Heat-resistant design for open flame use
- Stable steel legs ensure secure positioning
- Supplied by LabChoice Australia – Trusted quality
AUD 11.90 (Ex GST)
Tripod Stand Stainless Steel, Triangular, Stable Support for Heating Glassware, 200 mm High
- Stainless steel construction offers corrosion resistance
- Triangular top ensures balanced support for glassware
- 200 mm height suits Bunsen burner setups
- Stable tripod design prevents tipping during heating
- Ideal for chemistry, teaching, and industrial labs
- Supplied by LabChoice Australia – Trusted performance
AUD 16.50 (Ex GST)
Tripod Stand with Wire Gauze Mat Kit, Laboratory Heating Support
- Complete laboratory heating support kit including a stable metal tripod stand and wire gauze mat
- Designed to safely support beakers, flasks, and other glassware during heating operations
- Wire gauze mat distributes heat evenly, reducing thermal stress on glassware
- Tripod stand provides strong, stable support over Bunsen burners and spirit lamps
- Suitable for routine heating experiments in schools, universities, and research laboratories
- Reliable, lab-grade construction supplied by LabChoice Australia.
AUD 12.90 (Ex GST)
Tripod Stand, Triangular Cast Iron, Heat-Resistant and High Quality, Size 125 x 200 mm
- Triangular cast iron top: 125 mm wide
- 200 mm tall for optimal burner clearance
- Heat-resistant for direct flame applications
- Stable support for flasks, crucibles, gauze
- Common in chemistry, teaching, and QC labs
- Durable steel legs for long-term performance
AUD 12.90 (Ex GST)
Trolley Accessories, Bin and Tub Laboratory Support Type
- Trolley accessories for added storage and support in laboratory and educational trolley applications
- Includes bin and tub options for organised holding, collection, and handling of materials during routine use
- Listed sizes are 330 × 230 × 560 mm for the bin and 330 × 230 × 175 mm for the tub
- Designed for compatibility with stated trolley models LC-80-GE5577-01 and GE5577-02 respectively
- Supplied note states laboratory or educational use only, with operation under appropriate supervision
From AUD 24.90 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Trundle Wheels, Plastic Distance Measuring Type
- Plastic trundle wheels for practical distance measurement in classroom, outdoor, and educational activities
- Includes standard clicker model and counter-equipped model for different measuring and recording preferences
- Standard variation states a loud clicking device activated with each full metre revolution in either direction
- Counter variation is suitable for measuring length, area, and perimeter with adjustable overall length
- Portable format supports storage, reassembly, and routine use for long distance measurement tasks and demonstrations
From AUD 68.50 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Tube Adapter for Digital Vortex Mixer, 16 holes, Ø10mm (2-5mL Compatible with standard 5 mL centrifuge tubes.)
- Tube adapter with 16 holes for vortex mixer use
- Ø10 mm hole size suits 2 mL to 5 mL tubes
- Compatible with standard 5 mL centrifuge tubes
- Helps keep tubes positioned during vortex mixing
- Practical accessory for routine sample preparation workflows
- Supplied by LabChoice Australia for compatible mixer use
AUD 44.50 (Ex GST)
Tube Adapter for Digital Vortex Mixer, 21 holes, Ø8mm (1.5-2mL)
- Tube adapter with 21 holes for vortex mixer use
- Ø8 mm hole size suits 1.5 mL to 2 mL tubes
- Designed for compatible digital vortex mixer setups
- Helps hold tubes securely during vortex mixing
- Practical accessory for routine sample preparation workflows
- Supplied by LabChoice Australia for compatible mixer use
AUD 44.50 (Ex GST)
Tube Adapter for Digital Vortex Mixer, 25 holes, Ø4.5mm (0.1-0.5mL)
- Tube adapter with 25 holes for small tube mixing
- Ø4.5 mm hole size suits 0.1 mL to 0.5 mL tubes
- Designed for compatible digital vortex mixer setups
- Helps keep small tubes organised during vortex operation
- Practical accessory for routine sample preparation workflows
- Supplied by LabChoice Australia for compatible mixer use
AUD 44.50 (Ex GST)
Tube Adapter for Digital Vortex Mixer, 4 holes, Ø25.5mm (50mL)
- Tube adapter with 4 holes for digital vortex mixer use
- Ø25.5 mm hole size suits 50 mL tubes
- Helps keep larger tubes positioned during vortex mixing
- Practical accessory for routine sample preparation workflows
- Suitable for compatible vortex mixer accessory setups
- Supplied by LabChoice Australia for compatible mixer use
AUD 44.50 (Ex GST)
Tube Adapter for Digital Vortex Mixer, 8 holes, Ø14mm (10-15mL, Supports 5 mL Conical Tubes)
- Tube adapter with 8 holes for digital vortex mixer use
- Ø14 mm hole size suits 10 mL to 15 mL tubes
- Supports 5 mL conical tubes where compatible
- Helps keep tubes positioned during vortex mixing
- Practical accessory for routine sample preparation workflows
- Supplied by LabChoice Australia for compatible mixer use
AUD 44.50 (Ex GST)
Tube Adapter Range for Microplate Mixer and Vortex Mixture - 12 holesXØ9.8mm+12 holesXØ6.6mm+12 holesXØ5mm（1.5/2.0/0.5/0.2mL）
- Tube adapter range for microplate mixer and vortex mixer use
- Mixed-hole design for 1.5 mL, 2.0 mL, 0.5 mL and 0.2 mL tubes
- Includes 12 holes Ø9.8 mm, 12 holes Ø6.6 mm and 12 holes Ø5 mm
- Supports organised tube placement during laboratory mixing workflows
- Suitable for compatible microplate mixer and vortex mixer accessories
- Practical adapter option for small-volume sample mixing and preparation
AUD 44.50 (Ex GST)
Tube Adapter Range for Microplate Mixer and Vortex Mixture - 15 holes test tubes, Ø10mm (1.5-2mL)
- 15-hole tube adapter for compatible microplate mixers and vortex mixers
- Designed for Ø10 mm test tubes with 1.5–2 mL capacity
- Helps hold multiple small tubes during routine mixing workflows
- Supports organised tube placement for repeated sample preparation
- Suitable for small-volume lab mixing and tube-based workflows
- Check tube diameter and mixer compatibility before use
AUD 44.50 (Ex GST)
Tube Adapter Range for Microplate Mixer and Vortex Mixture - 16 holes test tubes, Ø12mm (5mL)
- 16-hole tube adapter for compatible microplate mixers and vortex mixers
- Designed for Ø12 mm test tubes with 5 mL capacity
- Helps hold multiple 5 mL tubes during routine mixing workflows
- Supports organised tube placement for repeated sample preparation
- Suitable for reagent mixing, sample handling, and tube-based lab use
- Check tube diameter and mixer compatibility before use
AUD 44.50 (Ex GST)
Tube Adapter Range for Microplate Mixer and Vortex Mixture - 24 holes test tubes, Ø10mm (1.5-2mL)
- 24-hole tube adapter for compatible microplate mixers and vortex mixers
- Designed for Ø10 mm test tubes with 1.5–2 mL capacity
- Helps hold multiple small-volume tubes during routine mixing
- Supports organised tube placement for repeated sample preparation
- Suitable for reagent mixing, sample handling, and tube-based lab use
- Check tube diameter and mixer compatibility before use
AUD 44.50 (Ex GST)
Tube Adapter Range for Microplate Mixer and Vortex Mixture - 4 holes test tubes, Ø28mm (50mL)
- 4-hole tube adapter for compatible microplate mixers and vortex mixers
- Designed for Ø28 mm test tubes with 50 mL capacity
- Helps hold larger tubes during routine laboratory mixing
- Supports stable tube placement for repeated sample preparation
- Suitable for reagent mixing, sample handling, and tube-based workflows
- Check tube diameter and mixer compatibility before use
AUD 44.50 (Ex GST)
Tube Adapter Range for Microplate Mixer and Vortex Mixture - 48 holes test tubes, Ø6mm (1mL)
- 48-hole tube adapter for compatible microplate mixers and vortex mixers
- Designed for Ø6 mm test tubes with 1 mL capacity
- Helps hold multiple small tubes during routine mixing workflows
- Supports organised sample placement for repeated lab mixing tasks
- Suitable for small-volume sample preparation and tube-based mixing
- Compatibility should be checked with the mixer model before use
AUD 44.50 (Ex GST)
Tube Adapter Range for Microplate Mixer and Vortex Mixture - 8 holes test tubes, Ø16mm (10mL)
- 8-hole tube adapter for compatible microplate mixers and vortex mixers
- Designed for Ø16 mm test tubes with 10 mL capacity
- Helps hold multiple 10 mL tubes during routine mixing workflows
- Supports organised tube placement for repeated sample preparation
- Suitable for sample handling, reagent mixing, and tube-based lab use
- Check tube diameter and mixer compatibility before use
AUD 44.50 (Ex GST)
Tube Adapter Range for Microplate Mixer and Vortex Mixture - 56-well, PCR-8Strips, (0.1ml-0.5ml)
- 56-well PCR 8-strip adapter for compatible mixers
- Suitable for PCR 8-strips in 0.1–0.5 mL range
- Helps hold small-volume PCR strips during mixing
- Supports organised strip placement for lab workflows
- Useful for sample preparation and reagent mixing
- Check PCR strip and mixer compatibility before use
AUD 44.50 (Ex GST)
Tube Adapter Range for Microplate Mixer and Vortex Mixture - 8 holes test tubes, Ø20mm (10-15mL)
- 8-hole tube adapter for compatible microplate mixers and vortex mixers
- Designed for Ø20 mm test tubes with 10–15 mL capacity
- Helps hold larger tubes during routine laboratory mixing workflows
- Supports organised tube placement for repeated sample preparation
- Suitable for reagent mixing, sample handling, and tube-based lab use
- Check tube diameter and mixer compatibility before use
AUD 44.50 (Ex GST)
Tube Clip Tray
- TCT10, TCT15 and TCT25 support OM11, OM15, OM8 and OM25 setups
- Drop-in, lift-out format secures conical flasks for high-speed mixing
- Accepts mixed Ratek tulip clip sizes for varied conical flask setups
- Stainless steel clips can be removed, rearranged and secured by screws
- Clip positions relocate with simple screw fittings for flexible tray layouts
- Maximum capacity depends on clip size and can be confirmed with the office
From AUD 2.00 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Tube Holding Rod for Vortex Mixture
- Supports tube adapter use where a LC-85-DVT1.2 holding rod is required
- Provides a clear tube holding rod option for adapter-based setups
- Suitable for users matching components by LC-85-DVT1.2 model reference
- Keeps product selection simple when ordering tube adapter accessories
- Clear naming supports accurate website listing and customer selection
AUD 111.50 (Ex GST)
Tube Rotator for Sample Blood mixing, 0 to 80rpm
- Supplied with disk and rotisserie accessories for 12 × 1.5 mL, 12 × 15 mL and 12 × 50 mL centrifuge tubes
- Interchangeable accessories support microtubes, standard conical tubes and larger-volume centrifuge tubes
- Adjustable rotation speed from 0 to 80 rpm supports controlled laboratory sample mixing
- Scale-based speed control allows simple and direct manual speed adjustment
- Continuous operating mode supports procedures requiring uninterrupted sample rotation
- DC motor drive provides stable rotational movement during routine laboratory operation
- Suitable for biotechnology, molecular biology, clinical, pharmaceutical, research and teaching laboratories
AUD 612.50 (Ex GST)
Tulip clip for Conical Flask
- 100 mL, 1000 mL and 2000 mL clips suit conical flask holding
- Stainless spring steel construction supports secure flask retention
- Simple screw fitting allows attachment to compatible mounting trays
- Clips can be removed, rearranged or combined with other clip sizes
- Extra support spring is included for 1000 mL and 2000 mL clips
- Compatible with TCT5, TCT7, TCT10, TCT15 and TCT25 trays
Tungsten Filament Lamp Replacement T500-5 for TN500 and TN420 Turbidity Meters
- Replacement tungsten filament lamp for compatible Apera Instruments turbidity meters
- Designed for use with TN500 and TN420 turbidity meter models
- Suitable for replacing the original lamp when maintenance or lamp replacement is required
- Easy-to-install replacement component for routine turbidity meter upkeep
- Helps support continued operation of compatible turbidity testing instruments
- Meter model compatibility and installation procedure should be confirmed before replacement
AUD 130.00 (Ex GST)
Tuning Fork Set of 8, Blued Steel in Case
- Blued steel tuning fork set for sound demonstrations
- Set includes 8 tuning forks
- Supplied in a polystyrene storage case
- Listed notes and frequencies include C256, D288 and E320
- Also includes F341.3, G384, A426.6, B480 and C512
- Suitable for pitch, frequency and vibration teaching
- Useful for resonance, sound wave and acoustics demonstrations
- Suitable for school physics and general science laboratories
- Helps compare different musical notes and sound frequencies
- Use under appropriate laboratory or educational supervision
AUD 33.90 (Ex GST)
Tuning Fork Set, 8 Pieces with Wooden Case and Hammer
- High quality tuning fork set for sound and vibration demonstrations
- Set includes 8 tuning forks
- Supplied in a wooden storage box
- Includes hammer or rubber mallet for striking
- Frequency set includes 256 Hz, 288 Hz, 320 Hz and 341 Hz
- Also includes 384 Hz, 426 Hz, 480 Hz and 512 Hz
- Suitable for pitch, frequency, resonance and sound wave teaching
- Useful for school physics and general science laboratories
- Supports practical comparison of different sound frequencies
- Use under appropriate laboratory or educational supervision
AUD 118.50 (Ex GST)
Tuning Forks on Resonance Boxes, Pair, 2 × 426.6 Hz
- Pair of steel tuning forks mounted on resonance boxes
- Nominal frequency listed as 426.6 Hz for each fork
- Designed for demonstrating sympathetic resonance and beats
- One fork includes an adjustable mass for shifting frequency
- Beat frequency depends on the difference between the two fork frequencies
- Individual resonance boxes help amplify the sound
- Suitable for sound, vibration, resonance and wave demonstrations
- Useful for school physics and teaching laboratory workflows
- Handle and strike tuning forks according to approved teaching methods
- Use under appropriate laboratory or educational supervision
AUD 49.90 (Ex GST)
didn't see what you are looking for ?
We’ll source it or make it for you. LabChoice supports your research every step.