Long Deck Single Layer Rocking Tube Rotator Brushless DC Motor
- Gentle rocking and rotating action supports controlled laboratory sample mixing
- Adjustable speed range from 0 to 30 rpm suits low-speed mixing procedures
- Fixed 30 ± 3° tilt angle provides consistent rocking movement during operation
- Continuous operating mode supports procedures requiring uninterrupted sample motion
- Brushless DC motor supports reliable extended use and reduced maintenance
- Maximum load capacity of 1 kg accommodates compatible laboratory containers
- Long deck design is available with various silicone mattress accessories
$554.50 (Ex GST)
Long Time Sand Timers, Durable Classroom and Activity Timing Range
- Long time sand timer range with 10, 15, and 30 minute options
- Robust build includes moulded end caps and thick wall surrounds
- Designed for extreme durability in repeated group or individual use
- Suitable for games, event timing, and classroom lesson activities
- Useful for science, mathematics, and general educational timing tasks
From $43.90 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Loudspeakers in Protective Housing, Enclosed Laboratory Speaker
- Loudspeakers in strong housings with metal grilles, protects cones during student handling and storage
- 4 mm socket connections on each unit, supports banana plug leads for fast classroom setup
- Extension speaker options: 75 mm or 56 mm diameter, both 8 ohm impedance, reasonable fidelity output
- Wave study option: pair of 150 mm twin cone speakers, 5 W RMS, 4 ohm impedance, broad range response
- Designed for IEC Wave Lab generator use, also general purpose, includes inbuilt current limiting to reduce coil burnout risk
From $78.50 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Low Range Glass Thermometers, 305 mm Total Immersion Laboratory Range
• Low range thermometer series in 305 mm total immersion format
• Red spirit filling supports routine low temperature laboratory measurement
• Includes -100 to 50°C and -50 to 50°C working range options
• White backed version supplied for the broader low range model
• Suitable for laboratory and educational temperature monitoring
From $80.90 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Low Wall Porcelain Crucibles With Lid
• Low wall porcelain crucibles with lids, capacity options 15, 25, 30, 40, 45 and 50 mL for controlled heating and ashing tasks
• Product codes listed C10, C11, C12, C12-1, C13 and C14, supports quick ordering and size matching
• Dimensions specified for each capacity, 25 mL 47 x 24 x 27 mm through 50 mL 59 x 28 x 38 mm, 15 mL stated 43 x 19 x 23 mm
• Supplied with lids to help reduce spatter and contamination during heating, suitable for routine laboratory work
• Packing stated for 15 mL option 70 per pack and 540 per carton, supports class sets and laboratory stock control
From $1.90 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Low-Speed 220V Blood Collection Tube Centrifuge with 6-Place Rotor, up to 3,400 rpm
- Fixed speed of 3,400 rpm delivers up to 1,600 × g for routine blood sample separation
- SE6-10P rotor supports 6 × 3 to 10 mL compatible blood collection tubes
- Electronic timer operates from 30 seconds to 30 minutes, with continuous operation available
- LED display shows remaining run time for clear monitoring during centrifugation
- One acceleration level and three deceleration levels support controlled sample separation
- Soft braking helps reduce disturbance of separated serum and plasma layers
- Automatic lid lock, mechanical lid lock and explosion-proof test approval support safer routine use
Low-Speed Clinical Centrifuge Multi-Tube Rotor with P1/P2 Programs, up to 5,000 rpm
- Adjustable speed range from 300 to 5,000 rpm in precise 10 rpm increments
- Maximum relative centrifugal force of 2,600 × g, adjustable in 10 × g increments
- Supports 6 × 1.5 to 5 mL, 7 mL, 10 mL or 15 mL tubes, and 4 × 20 mL or 50 mL tubes
- P1 and P2 programs provide convenient one-key access to routine centrifugation procedures
- LCD displays speed or RCF and operating time for clear monitoring
- One acceleration level and two deceleration settings support different separation requirements
- Brushless DC motor, automatic lid release and integrated safety monitoring support routine laboratory operation
Low-Speed Clinical Centrifuge with Blood, Urine and Faecal Programs, up to 4,000 rpm
- Adjustable speed range from 300 to 4,000 rpm in 100 rpm increments, delivering up to 1,900 × g
- Default 8-place angle rotor accommodates 8 × 15 mL compatible centrifuge tubes
- Optional 12-place angle rotor supports 12 × 10 mL compatible laboratory tubes
- Blood, urine and faecal programs provide convenient settings for routine specimen processing
- Three acceleration levels and four deceleration levels support controlled starting and braking
- LED display allows operating speed to be selected and monitored in rpm or RCF
- Maintenance-free brushless DC motor supports quiet operation at ≤60 dB(A)
Low-Speed Clinical Centrifuge with Optional Rotors, up to 4,000 rpm
- Supplied with one selectable rotor from DS6-15, DS4-50, DA24-15P, DA8-15P or DA12-10P
- Adjustable speed range from 500 to 4,000 rpm in 100 rpm increments
- Maximum relative centrifugal force of 2,500 × g supports routine clinical sample separation
- Compatible rotor options support 6 × 15 mL, 4 × 50 mL, 24 × 15 mL, 8 × 15 mL or 12 × 10 mL tubes
- Blood, urine and faecal programs provide convenient routine sample-processing settings
- Three acceleration levels and four deceleration levels support controlled starting and braking
- LCD display, automatic internal diagnosis and brushless DC motor support reliable laboratory operation
Low-Speed Dual-Ring Centrifuge for 10 mL and 15 mL Tubes, up to 3,500 rpm
- Dual-ring rotor accommodates 12 × 10 mL tubes in the inner ring and 12 × 15 mL tubes in the outer ring
- Adjustable speed range from 100 to 3,500 rpm in 100 rpm increments
- Maximum relative centrifugal force of 2,260 × g supports routine low-speed sample separation
- Timed operation from 30 seconds to 99 minutes 59 seconds, with continuous mode available
- Six selectable deceleration levels help reduce sample disturbance during braking
- LCD shows speed, time and operating status for clear real-time monitoring
- Brushless DC motor and dynamically balanced rotor support operation at ≤55 dB(A)
Low-Speed Multi-Rotor Centrifuge with 4 × 100 mL Capacity, up to 6,000 rpm
- Adjustable speed range from 300 to 6,000 rpm in precise 10 rpm increments
- Maximum relative centrifugal force of 4,100 × g supports routine sample separation
- Maximum rotor capacity of 4 × 100 mL accommodates larger-volume laboratory samples
- Compatible with optional fixed-angle and swing-out rotors for varied tube configurations
- Nine acceleration levels and ten braking levels support controlled sample separation
- Stores up to nine procedures for faster recall of frequently used centrifugation settings
- Automatic rotor identification, quick-spin operation and integrated safety monitoring support controlled use
Magdeburg Hemispheres, 75 mm Atmospheric Pressure Demonstration Apparatus
- Metal Magdeburg hemispheres, 75 mm diameter, classic atmospheric pressure demonstration apparatus.
- Valve allows sealing and evacuation, supports comparison of separation force with air inside versus reduced pressure.
- Uses two spring scales, measure pull force when separating hemispheres under different internal pressure states.
- Vacuum pump step increases holding force, shows atmospheric pressure effect through larger force readings.
- Laboratory or educational use only, supervise vacuum handling and secure grip during pull-apart demonstration.
$72.50 (Ex GST)
Magnesium Ribbon, 25 g Reel 3 mm Wide Laboratory Demonstration Type
- 25 g reel, approx 14.5 m per roll, 3 mm wide, 0.25 mm thick ribbon.
- Declared composition 99% magnesium, 1% zinc and lead, uniform ribbon for demonstrations.
- Burns with very intense bright white light and high heat, leaves flaky magnesium oxide residue.
- Eye safety critical, UV-blocking goggles recommended, avoid direct viewing for more than seconds, supervised use.
- EUD required, Cat. 2 purchase, store securely, handle as regulated reactive metal ribbon.
$72.50 (Ex GST)
Magnet Teaching and Demonstration Range
- Magnet teaching and demonstration range supports physics lessons on poles, attraction and repulsion, magnetic fields and basic electromagnetism concepts
- 7 piece teaching kit includes bar magnets, U magnet, horseshoe magnet and ring magnet plus compass, magnetic needle and stand and iron filings, supplied in case 247 x 182 x 68 mm
- Neodymium rare earth magnet listed grade N35 with max working temperature 80°C, strong compact format for experiments, handle with care due to pinch risk
- Additional demonstration options include hematite magnetoids pair 60 x 18 mm and large U magnet with keeper 110 x 103 x 50 mm lifting stated 68 kg
- Also listed floating ring magnet stand, U shape magnet 50 mm and permanent magnet wand moulded in plastic, choose item based on lesson focus and supervision requirements
From $7.50 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Magnetic Field Demonstrator Kit, Acrylic Cavities with Metal Bars
- Magnetic field demonstrators for classroom visualisation of field behaviour, supports clearer observation than loose filings in many setups
- Acrylic cavity type option listed with iron bars, size stated 200 x 100 mm and interlocking lugs feature to join multiple units into a larger display
- Acrylic cavities with metal bars kit option listed, supports modular teaching demonstrations where multiple cavities can be aligned for wider viewing areas
- Flat form oil filled demonstrator listed 190 x 100 mm, supports smooth visual tracking of magnetic effects in a contained format
- Observation box style demonstrator listed acrylic type, supports safe hands on viewing, select format based on class size, display area needed and bench space
From $17.50 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Magnetic Hotplate Stirrer, IKA RCT Basic Type, up to 20 L Capacity
- Tempered shatterproof glass surface for optimal chemical resistance and easy cleaning
- Largest display in its class with easy-to-read LED display
- Illuminated symbols for displaying important status information (set and actual temperature, heating status, temperature sensor
- USB and RS232 interface for control or documentation of the test parameters via a PC
- Compatible with labworldsoft laboratory software
- QR code for quick access to device information, accessories, downloads and extended warranty
- Easily accessible main switch on the front of the device
$1,580.00 (Ex GST)
Magnetic Stirrer for Lab Mixing, 2 to 20 L, up to 2500 rpm
- Compact and large models support 2 L to 20 L stirring applications
- Suitable for dissolving solids, volatile solutions and lab mixing
- Rare earth magnets support strong connection to the stir bar
- Analogue speed control allows light agitation or vigorous churning
- Nitrile rubber mats support flask and container stability during use
- Correct stir bar size and flat base containers support best results
From $526.00 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Magnetic Stirrer Hotplate IKA C-Mag HS10, up to 15 L Capacity
- Powerful motor supports stirring quantities up to 15 L H₂O for laboratory mixing.
- Fixed 550°C safety circuit helps protect the unit during high-temperature operation.
- Hot Top indicator warns users of hot surfaces to help prevent accidental burns.
- Digital LED display allows accurate temperature setting and clear operating control.
- DIN 12878 bushing supports contact thermometer connection for precise temperature control.
- Digital error code display and elevated control panel improve safety and spill protection.
$2,894.00 (Ex GST)
Magnetic Stirrer Hotplate IKA C-Mag HS4 with Ceramic Heating Plate, Up to 5 L Capacity
- Powerful motor supports stirring quantities up to 5 L H₂O for routine lab mixing.
- Fixed 550°C safety circuit helps protect the unit during high-temperature operation.
- Hot Top indicator warns users of hot surfaces to help reduce burn risk.
- Digital LED display allows exact temperature setting and clear operating control.
- Digital error code display supports easier fault identification during operation.
- Elevated control panel helps protect controls against leaking liquids and spills.
$1,677.50 (Ex GST)
Magnetic Stirrer Hotplate IKA C-Mag HS7 with Ceramic Heating Plate, Up to 10 L Capacity
- Powerful motor supports stirring quantities up to 10 L H₂O for laboratory mixing.
- Fixed 550°C safety circuit helps protect the unit during high-temperature operation.
- Hot Top indicator warns of hot surfaces to help reduce burn risk.
- Digital LED display allows exact temperature setting and clear operating control.
- DIN 12878 bushing connects contact thermometers for precise temperature control.
- Digital error code display and elevated panel improve fault visibility and spill protection during use.
$1,668.50 (Ex GST)
Magnetic Stirrer IKA Big Squid with Glass Surface, Up to 5 L Capacity
- Digital LED speed display provides clear visibility of stirring speed settings.
- Electronically controlled motor supports higher capacity and stable performance.
- Wide speed range from 0 to 2,500 rpm allows flexible stirring control.
- Maximum stirring quantity supports up to 1.5 L for routine lab mixing.
- Glass top and TPC-ET synthetic bottom provide excellent chemical resistance.
- Recyclable materials support a more sustainable laboratory equipment choice.
$881.00 (Ex GST)
Magnetic Stirrer IKA Squid with Glass Surface up to 1 L Capacity
- Digital LED speed display provides clear visibility of stirring speed settings.
- Electronically controlled motor supports greater capacity and stable performance.
- Wide speed range from 0 to 2500 rpm allows flexible stirring control.
- Maximum stirring quantity supports up to 1 L for routine lab mixing.
- Chemical-resistant top and TPC-ET synthetic bottom support durable lab use.
- Recyclable materials support a more sustainable laboratory equipment choice.
$917.50 (Ex GST)
Magnetic Stirrer, 5 Inch, up to 20 L Capacity
- Speed range from 0 to 1500 rpm supports controlled laboratory stirring.
- Maximum stirring quantity supports up to 20 L H₂O for larger solution mixing.
- Ceramic work plate provides excellent corrosion resistance for routine lab use.
- Compact 5 inch platform is suitable for space-saving benchtop operation.
- Designed for consistent magnetic stirring of samples, reagents and solutions.
- Practical choice for schools, research labs and LabChoice Australia equipment ranges.
$729.50 (Ex GST)
Magnetic Stirrer, 5 Inch, up to 3 L Capacity
- Digital speed control from 0 to 1500 rpm supports controlled laboratory stirring.
- Maximum stirring quantity supports up to 3 L H₂O for routine solution mixing.
- Simple laboratory stirring option for controlled sample and reagent mixing tasks.
- Suitable for schools, research laboratories and general laboratory applications.
- Practical magnetic stirrer for the LabChoice Australia laboratory equipment range.
$286.50 (Ex GST)
Magnetic Stirrer, Square 7 Inch Glass Ceramic Plate for 10 L Mixing
- Speed range from 0 to 1500 rpm supports controlled laboratory stirring.
- Maximum stirring quantity supports up to 10 L H₂O for solution mixing.
- Ceramic work plate provides excellent corrosion resistance for routine lab use.
- Glass ceramic plate supports smooth heating, stirring and easy surface cleaning.
- Suitable for laboratory, education, research and general sample preparation workflows.
- Practical magnetic stirring option for the LabChoice Australia equipment range.
$1,107.50 (Ex GST)
Magnetic Stirrer, up to 1500 rpm
- Magnetic stirrer for efficient laboratory liquid mixing
- Variable speed control for adjustable stirring performance
- Supports uniform mixing of solutions and liquid samples
- Suitable for routine laboratory, research, and educational applications
- Compact benchtop design for convenient day-to-day use
- Designed for sample preparation, chemical mixing, and solution agitation
- User-friendly operation for controlled stirring tasks
- Available from LabChoice Australia for Australian laboratory environments
From $611.50 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Magnetism Teaching Accessories
- Magnetism accessories for clearer classroom demonstrations, supports safer and cleaner visualisation of magnetic fields compared with loose filings
- Coloured magnetic line chips listed 100 g with 5 mixed colours per pack, designed to show a three dimensional magnetic field display around magnets
- Chips described as clean easy alternative to iron filings, supports repeated demonstrations with reduced mess and faster classroom reset between groups
- Magnetising box listed for recharging bar magnets without power, supports maintaining magnet performance for repeated teaching use
- Box dimensions stated 210 x 90 x 40 mm with weight 0.5 kg, compact bench accessory, store with magnet kits and use under appropriate supervision
From $80.90 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Manifold Kit for Dry Block Heaters
- 4 Way and 12 Way kits support compatible nitrogen blow-down workflows
- Suits compatible block heaters with 2 or more block positions
- Removable surgical stainless steel gas needles allow easy replacement
- Fits EMS1000, EMS2000 and EMS4000 stands for manifold support
- Individual rear heater valves allow gas flow control to the manifold
- Blanking needles and custom options support varied test tube setups
From $1,119.00 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Manual Hand-Operated Centrifuge, 4-Place Tube
- Simple hand-driven centrifuge suitable for laboratory and educational use
- Designed for 10 to 15 mL tubes, supporting basic sample separation tasks
- Supplied with a table mounting clamp for stable manual operation
- Ideal for field work where powered centrifugation is not required
- Overall length: 280 mm, with 22 mm ring ID for tube placement
- Plastic body with metal side plate and metal clamping plate
- Handle should only be turned clockwise during operation
- Intended for laboratory or educational settings only
$87.50 (Ex GST)
Manual Plastic Vacuum Pump Handheld with Built in Pressure Gauge
- Compact design for portable vacuum creation
- Integrated pressure gauge for accurate readings
- Ergonomic handheld operation—no power required
- Ideal for filtration, degassing, and lab testing
- Durable plastic body resists chemical exposure
- Supplied by LabChoice Australia – Reliable & efficient
- Packaging: Single Unit
$65.00 (Ex GST)
MCE Syringe Filters, Mixed Cellulose Ester Laboratory Filtration Range
• Mixed cellulose ester syringe filters supplied pack of 100, supports routine laboratory filtration and sample clarification tasks
• Pore size options listed 0.45 µm and 0.8 µm, select based on particle load and target clarification level
• Diameter options listed 13 mm and 25 mm, supports different sample volumes and flow preferences in syringe filtration
• Consistent pack quantity 100 supports lab stocking and batch preparation workflows, reduces reordering frequency
• Clear specification by membrane type, pore size and diameter supports correct selection, keep filters sealed until use and handle under appropriate laboratory supervision
From $115.90 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Measuring Cylinder Class A, Interchangeable Stopper, Round Base, Borosilicate Glass (BORO 3.3)
- Class A accuracy enables precise liquid measurement
- Interchangeable stopper allows secure liquid sealing
- Stable round base ensures safety during pouring
- Ideal for titration, reagent prep, and quantitative work
- Used in analytical, educational, and R&D laboratories
- Made from LabChoice BORO 3.3 glass – High quality
From $28.50 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Measuring Cylinder Class A, Spout & Break-Resistant Collar, Borosilicate Glass (BORO 3.3)
- Class A tolerance enables precision volume analysis
- Spout provides accurate, spill-free liquid dispensing
- Break-resistant collar increases durability and safety
- Used for titration, dilution, and reagent measurement
- Trusted in analytical, QC, pharma, and teaching labs
- Made from LabChoice BORO 3.3 glass – High quality
From $11.20 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
didn't see what you are looking for ?
We’ll source it or make it for you. LabChoice supports your research every step.