Electromagnetic Induction Demonstrator with Rotating Wire and Rod Magnet
- Single-turn heavy wire loop rotated by hand around strong rod magnet for core induction demonstrations.
- Loop cuts magnetic field, generates very small induced voltage detectable with a very sensitive meter.
- Demonstrates conductor cutting magnetic lines of force, fundamental electromagnetic induction theory.
- Includes a built-in “mystery” teaching prompt for student discussion during experiments and lessons.
- Optional IEC DC amplifier LB0071-001 boosts small current for reading on student mA bench meters.
$319.90 (Ex GST)
Electron Charge-to-Mass Apparatus with Tube, Solenoid Not Included
- Magic eye electron tube on base
- Heater and plate voltage terminals
- Visible electron fan, end viewing
- Magnetic deflection via solenoid field
- Curvature measurement for e/m method
$232.90 (Ex GST)
Electronic Bottle-Top Dispenser with Digital Motor Control up to 0.1 to 99.9 mL
- Motor-controlled digital dispensing supports fatigue-free liquid handling
- Volume range from 0.1 to 99.9 mL with 100 µL resolution
- High-quality stepper motor provides smooth and controlled dispensing performance
- Sixteen speed levels allow adjustable aspiration and dispensing control
- Reagent recovery feature helps minimise liquid waste during operation
- TFT display module supports simple volume selection and clear operating control
- Continuous dispensing and stepper dispensing modes support flexible laboratory workflows
$1,102.50 (Ex GST)
Electronic Burette with LCD Display and Stirrer up to 0.01-99.99 ml
- Electronic burette supports fatigue-free digital titration and liquid dispensing
- High-quality motor provides smooth operation with excellent precision and accuracy
- Volume range from 0.01 mL to 99.99 mL with 10 µL resolution
- Built-in magnetic stirrer supports complete and convenient titration operation
- Remote control panel helps reduce manual disturbance during operation
- Sixteen speed levels support controlled liquid delivery across laboratory workflows
- Large LCD display shows operating parameters clearly for easier method control
$1,510.00 (Ex GST)
Electronic Simulated Radioactive Source (Magic)
- Simulated Geiger counter behaviour, no radioactive source used, safe teaching demonstrator
- Microprocessor display shows counts leaving imaginary source, clear numeric output
- Second display mode shows particles remaining in source, supports half-life concept
- Random count behaviour output, demonstrates counting statistics and variability effects
- 240/12 V AC plug pack powered, suitable for physics and maths lessons on data
$318.50 (Ex GST)
Electronic Titrator with Touchscreen and Data Traceability
- Electronic titration system supports accurate, stable and fatigue-free titration workflows
- Volume range from 0.020 mL to 99.999 mL with minimum operation from 20 µL
- Supports single-drop, fixed-volume and manual liquid discharge modes
- Manual suction and fixed-volume suction modes support flexible reagent handling
- Touchscreen control panel and dedicated operating handle support convenient operation
- Bluetooth, WiFi and free software support upstream control and data traceability
- Stores up to 1000 experimental records for repeatable and traceable laboratory work
From $2,857.00 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Electronics and Photonics Kit, Advanced Classroom Demonstration Kit
- HSC aligned electronics and photonics teaching system, designed for guided student learning with minimal instructor input
- Fixed work panel construction, components not removable, supports consistent setups across repeated classroom sessions
- 2 mm banana plug cable and link system, with adaptors to 4 mm when required for connection flexibility
- Nine experiments supplied as copyable files, provided as a separate CD option for the kit
- CD includes student and teacher versions with answers, single CD covers whole school with free copying permission
From $46.50 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Electronics Trainer Panels, Complete Electronics Study System
- Trainer panels with non-removable components, built for repeated classroom use and consistent circuit setups
- Digital trainer covers gates and circuit building, includes AND OR NAND NOR NOT, plus advanced and counting circuits
- Systems trainer uses sensors with sensitivity controls to build input output logic systems in real application style tasks
- Demonstration gates trainer uses overlays, rear slide switches and LEDs for class prediction and verification activities
- Runs from 12 V supplies depending on model, clear cover protects during storage and holds connection cables
From $376.90 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Save 10%
Electrophoresis Power Supplies, LCD Touchscreen, 4-Channel Parallel Output Type
- CD touchscreen for simple setup and clear progress tracking
- 4-channel parallel output supports four electrophoresis units at once
- Constant voltage, current, and power modes for flexible operation
- USB data recording and multi-step programming support controlled runs
- Short-circuit and no-load protection improve laboratory safety
From $1,384.50 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Electrophorus metal with Handle and Plate
- lassic electrophorus device for collecting and removing electrostatic charge in teaching demonstrations
- Works with metal plate and insulating sheet, electrophorus placed opposite side to form capacitor system
- Flat metal disc fixed to a very insulating handle, designed for handling charged plate safely
- Supplied with handle and plate, supports repeatable electrostatics experiments on charge storage and transfer
- Diameter options 50 mm, 100 mm, 150 mm, choose size suited to demonstration scale and apparatus layout
From $52.50 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Electrostatic Magic Wand Fly Stick Demonstration Kit
- Fun classroom electrostatics demonstration wand
- Supplied with 1 fly stick levitation wand
- Includes 5 pre-cut mylar tinsel flying shapes and manual
- Demonstrates static charge, attraction, repulsion and levitation effects
- Can be used to bend water, move aluminium cans and float bubbles
- Requires 2 AA batteries, not included
- Spare flyer option available for replacement classroom use
From $6.50 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Electrostatic Pith Balls, Laboratory Charge Study Model
- Electrostatic pith balls for classroom demonstrations, available as plain or conductive coated sets
- Approx 8 mm diameter, light mass supports visible attraction, repulsion and charge transfer behaviour
- Plain option supplied as pack of 12, general ball shape, not fully round as described
- Conductive option supplied as pack of 10, surface coated with conductive paint for experiment use
- Suitable for electrostatic investigations using charged rods, electroscopes or induction setups where ball motion
- indicates field effects
From $12.50 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Electrostatic Rubbing Cloth Set (2 Pack), Cotton and Wool
- Two electrostatics rubbing cloths for charging plastic rods by friction in classroom practicals.
- Includes wool cloth and cotton flannelette, two common fabrics for static electricity demonstrations.
- Supports charge generation, attraction and repulsion observations after rubbing rods.
- Simple consumable accessory for electrostatics kits, easy to store and issue to students.
- Enables material comparison in friction charging activities without changing experiment setup.
$13.90 (Ex GST)
Electrostatics Experiment Kits, Static Electricity Experiment Set
- Two electrostatics kit levels, simple parts set for basic experiments or advanced Nuffield type for deeper teaching
- Simple kit supports introductory electrostatics activities using a straightforward selection of parts
- Advanced kit includes IEC metal vane electroscope, suited to more advanced electrostatics demonstrations and investigations
- Designed for classroom teaching, selection based on experiment complexity and the required electrostatics equipment
- Choose simple for fundamentals, or advanced for electroscope based work and extended electrostatics experiments
From $72.50 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Enamelled Copper Wire, Standard Wire Gauge Reel Range
• Copper wire range supplied with enamel insulation on 125 g reels
• SWG options from 18 to 32 support thickness-based selection
• 18 SWG variation includes stated 1.22 mm wire diameter
• Suitable for laboratory, educational, coil, and electrical bench work
• Reel format supports organised storage and practical day-to-day handling
From $27.50 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Enclosed Low Power Light Sources, 4 mm Connections, 2.5 V MES
- Enclosed low power light source range for basic electricity teaching
- Uses a 2.5 V MES lamp screwed into a socket
- Transparent plastic vial housing provides protective enclosure
- Available with 4 mm sockets or 4 mm spin-free IEC terminals
- LC-80-HL2012-001 uses 4 mm sockets for cable connection
- LC-80-HL2012-101 uses 4 mm spin-free IEC terminals for cable connection
- Suitable for low-voltage classroom circuit experiments
- Practical for teaching lamps, current flow, switches and simple circuits
- Confirm power source, voltage suitability and classroom supervision before use
From $27.50 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Energy Conversion and Fibre Optics Classroom Learning Kits
• Teaching kits for energy conversion and fibre optics communications, supports hands on STEM learning in classroom settings
• Energy conversion kit includes wind power fan 14 x 26 cm, hand crank generator 12 x 11 x 8 cm, solar panels 6.5 x 4.5 cm, battery 9.5 x 6.5 cm, buzzer, LED and small fan
• Board mounted energy conversion kit includes on/off switch, solar cell, battery holder, hand crank and 4 mm output sockets
• Accessories listed include 2 AA batteries, electromagnet, buzzer, motor with fan, LED and resistor for expanded experiments
• Fibre optics kit teaches building basic receivers, transmitters and cable interfaces, instruction booklet included, cable stated black not clear, use under supervision
From $56.50 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Erlenmeyer Conical Flask, Narrow Neck, Borosilicate Glass (BORO 3.3)
- Tapered shape ideal for swirling and mixing
- Narrow neck minimizes spillage and evaporation
- Versatile use in heating, titration, and storage
- Used in research, education, and industrial labs
- Preferred by lab technicians across Australia
- Made from LabChoice BORO 3.3 glass – High quality
From $2.90 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Erlenmeyer Conical Flask, Wide Neck, Borosilicate Glass (BORO 3.3)
- Wide neck allows easy pouring and access
- Tapered shape supports safe swirling and mixing
- Ideal for culturing, heating, and storage tasks
- Used in microbiology, teaching, and lab research
- Trusted by science professionals across Australia
- Made from LabChoice BORO 3.3 glass – High quality
From $4.00 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Erlenmeyer Flask Attachment (100mL-250ml), Operating speed: 0~1500rpm
- Erlenmeyer flask attachment for compatible vortex mixers
- Suitable for 100 mL to 250 mL Erlenmeyer flasks
- Supports flask mixing at 0 to 1500 rpm operating speed
- Helps secure flasks during controlled vortex mixing
- Practical accessory for routine laboratory sample preparation
- Supplied by LabChoice Australia for compatible mixer use
$73.50 (Ex GST)
Erlenmeyer Jointed Conical Flask without Graduation, BORO 3.3 Glass
- Erlenmeyer Jointed Conical Flask without graduation, made from BORO 3.3 borosilicate glass for dependable laboratory use
- Plain body design without graduations suits applications where volume markings are not required
- Conical shape allows safe swirling and mixing with reduced risk of splashing
- Jointed neck enables secure connection with compatible laboratory glassware and apparatus
- Suitable for heating, reaction work, sample preparation, and general laboratory procedures
- BORO 3.3 glass provides excellent resistance to heat, chemicals, and thermal shock
- Ideal for laboratory, research, educational, and scientific applications requiring durable jointed glassware
From $59.90 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Erlenmeyer Jointed Conical Flask, BORO 3.3 Glass
- Erlenmeyer Jointed Conical Flask made from BORO 3.3 borosilicate glass for reliable laboratory performance
- Conical flask shape supports efficient mixing and swirling with reduced splash risk
- Interchangeable joint allows secure connection with compatible laboratory glassware
- Suitable for heating, sample preparation, reaction work, and general bench use
- BORO 3.3 glass offers strong resistance to heat, chemicals, and thermal shock
- Clear glass construction helps with easy observation of liquid level and reaction process
- Ideal for laboratory, educational, research, and routine scientific applications
From $6.90 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Ether Cooling Condenser, BORO 3.3 Glass
- Restricted Item – EUD Required: an End User Declaration (EUD) must be completed. A valid photo ID (such as a Passport, Driver Licence, or Proof of Age Card) is also required. Orders will not be shipped until all documentation is received and approved.
- Designed for efficient condensation of low boiling point solvents such as diethyl ether and other volatile organics
- Extended cooling surface improves vapour contact and heat exchange during distillation and reflux
- Supports smooth solvent recovery with reduced vapour loss in routine and research applications
- Compatible with standard laboratory joint sizes for easy integration into existing glassware setups
- Suitable for organic synthesis, solvent purification, teaching laboratories, and research workflows
- Made from LabChoice BORO 3.3 glass – High quality, supplied by LabChoice Australia
Evap System Needles, Replacement and Blanking Options
- Evaporation system needle accessory range
- Suitable for compatible Ratek evaporation system manifold kits
- Replacement needle option supports gas delivery through active manifold ports
- Blanking needle option blocks gas flow through unused manifold ports
- Replacement needle is surgical stainless steel with polycarbonate hub
- Blanking needle is made from surgical stainless steel
- Removable design supports routine manifold setup and maintenance
- Easy to install during replacement or configuration changes
- Sold individually
- Confirm manifold compatibility, gas setup and port fit before ordering
From $11.00 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Evaporating Dishes, Laboratory Glass Dish Range for Solvent Removal
- Glass evaporating dishes in multiple diameters and heights, supports solvent evaporation and concentration steps in routine lab work
- Base styles listed flat bottom or round bottom, choose format to suit heating setup and stability requirements
- Sizes stated 60 x 30 mm, 90 x 45 mm, 120 x 60 mm and 150 x 75 mm, match surface area to sample volume and evaporation rate
- Sold individually for flexible ordering, supports replacement of single items and small quantity lab stocking
- Carton quantity stated for 60 mm dish, 300 pieces per full carton, supports bulk purchasing for teaching labs and prep rooms
From $9.90 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Expansion Adapter, BORO 3.3 Glass
- Designed to expand joint compatibility for smooth glassware connections
- Provides secure transitions between ground glass joints in distillation and reflux setups
- Precision made for tight sealing and reduced vapor loss during heating work
- Ideal for organic chemistry, teaching labs, and research scale assemblies
- Crafted for reliable performance in high temperature and chemical environments
- Made from LabChoice BORO 3.3 glass, high quality
From $19.90 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Expansion-Type Wilson Cloud Chamber, Radioactive Sources Not Included
- Expansion-type Wilson cloud chamber method
- Alcohol pad vapour supersaturation setup
- Partial vacuum via pump for expansion
- Alpha pin source creates visible tracks
- Light source required, sources not included
$573.50 (Ex GST)
Extension Adapter Borosilicate Glass Laboratory Grade
-
- Extends the connection between glassware components with precision fit
- Ensures secure, leak-free joints in complex lab setups
- Suitable for distillation, reflux, and extraction assemblies
- Resistant to thermal shock and chemical corrosion
- Made from durable BORO 3.3 borosilicate glass for long-term use
- Manufactured and quality-tested by LabChoice Australia
From $14.50 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Extra High Voltage Power Supply, 0 to 6000 V DC / 3 mA
- Extra high voltage DC power supply for supervised laboratory and education use
- Output listed as 0 to 6000 V DC
- Centre-referenced output listed as 3000 / 0 / 3000 V DC
- Maximum output current limited to 3 mA
- Includes digital meter for output monitoring
- Low voltage outputs listed as 2 × 6.3 V AC at 4 A
- 6.3 V AC outputs are normally used for electron tube heater applications
- Suitable for spectrum tubes, Teltron tubes and Aepinus capacitor charging
- Designed with poor regulation so voltage falls quickly as current is drawn
- Use only under appropriate teacher or laboratory supervisor control
$768.90 (Ex GST)
Fast-Freeze Flask for Lyophilisation, BORO 3.3 Glass
- Fast-freeze flask for lyophilisation and freeze-drying sample preparation
- Made from G3.3 borosilicate glass for high thermal resistance
- Designed for use with 47 mm diameter filter membrane
- Compatible with standard 1/2 inch and 3/4 inch valve ports
- Suitable for EYELA, LABCONCO and VIRTIS systems with compatible valve ports
- Maximum flask temperature is listed as 490°C, with topper temperature up to 450°C
- Replacement tops, bottoms and filter paper are available separately
From $209.90 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Filter Funnel with Perforated Disc, BORO 3.3 Glass
- BORO 3.3 borosilicate glass construction for reliable chemical and heat resistance
- Perforated disc design provides stable support for filter paper during filtration
- Clear glass body allows easy visibility of liquid flow and filtration progress
- Suitable for routine laboratory filtration work in schools, research, and industrial labs
- Reusable, durable glassware option for consistent wet chemistry applications
- Smooth laboratory finish for easy cleaning and repeated use
- Designed for accurate, controlled filtration with compatible flask or receiver setups
Filter Funnels Long Stem 60 Degree Cone, BORO 3.3 Glass
- 60 degree cone long stem filter funnel designed for steady gravity filtration and clean transfer
- Manufactured from BORO 3.3 borosilicate glass for strong chemical resistance and thermal shock protection
- 60 degree cone supports secure seating of filter paper and helps maintain consistent flow
- Long stem improves reach into narrow neck flasks, reduces splashing, and supports drip control
- Smooth glass surface minimises residue, supports easier cleaning, and reduces sample loss
- Suitable for routine filtration in Australian school labs, universities, research, and QC environments
From $1.90 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
didn't see what you are looking for ?
We’ll source it or make it for you. LabChoice supports your research every step.