Motion & Dynamics
Air Track Air Tube Assembly Kit for 2 m and 2.5 m Models
- Air track air tube assembly kit only
- Suitable for compatible IEC 2 m and 2.5 m air tracks
- Same assembly kit is used for both 2 m and 2.5 m air track models
- Normally supplied with the air tube, but also available separately
- Includes sets of feet for air track support
- Includes level adjusting screws for track alignment
- Includes end caps, O-ring seals and tube screws
- Includes metric tape to suit the length of the track
- Includes end plug for blocking the air
- Complete with instructions
- Useful for air track setup, maintenance and replacement workflows
- Use under appropriate laboratory or educational supervision
AUD 160.90 (Ex GST)
Air Track Operation Kit for 2 m and 2.5 m Tracks
- Air track operation kit for physics experiments
- Suitable for compatible 2 m and 2.5 m air tracks
- Same operation kit is used for both track lengths
- Includes 2 long gliders and 2 short gliders
- Includes spring buffers and non-spring buffers
- Includes various springs and loop springs
- Includes track pulley, magnets, weights and inclination blocks
- Supplied with instructions
- Designed for performing air track motion experiments
- Included with complete 2.5 m MF0105Z-001 and 2 m MF0107Z-001 air tracks
- Also available separately as a replacement or accessory kit
- Use under appropriate laboratory or educational supervision
AUD 458.90 (Ex GST)
Air Track Photogate Kit, 2 Gates and Cables, Without Timer
- Photogate kit for IEC air track timing experiments
- Contains 2 universal photogates
- Supplied with required cables and plugs for connection to a digital timer
- Digital timer is not included
- Optional IEC Timer LB4064-101 is the recommended timer model
- Compatible with several IEC timer types where suitable
- Special legs allow the gates to engage with a triangular air track
- Gates can be slid along the air track to the required position
- Useful for motion, speed, acceleration and timing experiments
- Suitable for physics classrooms and teaching laboratories
- Confirm timer and air track compatibility before ordering
- Use under appropriate laboratory or educational supervision
AUD 458.90 (Ex GST)
Air Track Spark Recording Kits without generator
- Spark recording kit for compatible IEC air tracks
- Available for 2 m and 2.5 m air track models
- Supplied without spark generator
- Spark generator required is LC-80-LB0118-001
- Includes special insulated tracks for carrying spark electrodes
- Includes insulated tracks for carrying paper tapes
- Pens fitted to gliders carry sparks to the paper tape
- Supports friction-free air track operation during recording
- Spark marks create black dots on the paper tape
- Dot spacing can be measured to calculate velocity and acceleration
- Suitable for physics motion and mechanics experiments
- Use under appropriate laboratory or educational supervision
From AUD 389.50 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Air Track Sub Base Kits, 2 m and 2.5 m
- Optional sub base kits for compatible air track systems
- Available for 2 m and 2.5 m air tracks
- 2 m version is listed as a 10 stud kit
- 2.5 m version is listed as a 12 stud kit
- Supplied complete with assembly kit
- Mounts below the air tube for added support
- Adjustable screws help pull the air tube as straight as possible
- Designed to improve air track alignment and performance
- Feet are removed from the tube and fitted to the sub base
- Commonly used to improve straightness of 2.5 m or longer air tracks
- Suitable for physics classrooms and teaching laboratories
- Use under appropriate laboratory or educational supervision
From AUD 249.50 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Air Tracks, 2 m and 2.5 m, Complete with Kits
- Complete air track systems for physics and mechanics experiments
- Available in 2 m and 2.5 m track lengths
- Supplied complete with assembly kit and operation kit
- Designed for low-friction motion demonstrations using air support
- Suitable for velocity, acceleration, momentum and collision experiments
- Optional air blower and hose listed as LC-80-LB0115-002
- Optional photogate kit listed as LC-80-MF0138-001
- Optional electronic timer listed as LC-80-LB4065-101
- Optional sub base and assembly kit available for each track length
- Optional spark recording kit available for each track length
- Optional spark generator and cables listed as LC-80-LB0118-001
- Use under appropriate laboratory or educational supervision
From AUD 896.90 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Dynamics Carts, Laboratory Collision and Motion Kit
- Dynamics carts supplied as pairs for mechanics experiments, choose with firing pin facility or without firing pin
- Hyper Fire version: 600 g each, firing pin on each cart, safety catch locks pin to prevent firing when secured
- Inboard wheel design helps reduce tangles during runs and collisions on benches or tracks
- Supplier identification notes include IEC hexagon logo and precision wheels on underside before purchasing
- Non firing version: 450 g each pair, listed without firing pin, other specifications not provided in supplied text
From AUD 179.50 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Free Fall Apparatus, Mechanical Release, 1 m, 3 Balls
- IEC free fall apparatus for physics education
- 1 m vertical rail for free fall experiments
- Mechanical release system for ball drop activities
- Supplied with 3 balls of different sizes and materials
- Adjustable upper platform allows different falling distances
- Lower platform senses the ball impact to stop the timer
- Metallic ball creates the electrical start signal
- Cables and plugs are supplied in the kit
- Available with or without LCD timer
- LCD timer model includes LC-80-LB4057-001 timer
- No-timer model can be used with compatible timers
- Use under appropriate laboratory or educational supervision
From AUD 355.50 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Free Fall Apparatus, Solenoid Release, 1 m and 1.5 m
- IEC free fall apparatus for physics education
- Solenoid release system for steel ball drop experiments
- Available in 1 m and 1.5 m vertical rail versions
- Supplied with 2 steel balls of different sizes
- Adjustable upper platform allows different falling distances
- Lower platform senses ball impact and stops the timer
- Requires digital timer LC-80-LB4064-101 for solenoid operation
- Timer display resolution listed as 0.1 ms
- Available with or without LC-80-LB4064-101 timer
- All connection cables and plugs are supplied in the kit
- Suitable for acceleration due to gravity and free fall experiments
- Use under appropriate laboratory or educational supervision
From AUD 362.50 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
I-Gauge Mechanics Demonstrator, Height and Speed Measurement Teaching Set
- Narika I-Gauge mechanics demonstrator, links drop height changes to measured speed outcomes.
- Includes 1 Beespi V photogate, supports velocity measurement for quantitative comparisons.
- Height versus speed relationship focus, suitable for energy and motion discussion activities.
- Impact force explored through observed impact outcomes, supports classroom mechanics interpretation.
- Educational laboratory use item, designed for supervised student practical measurements.
AUD 610.50 (Ex GST)
Mini Electric Circular Motion Kit with Speed Control
- Modern circular motion kit for physics education
- Designed for classroom centripetal force experiments
- Compact electric system for safer indoor demonstrations
- Includes speed control for adjusting rotational motion
- Provides more convincing results than older PSSC style systems
- Useful for teaching circular motion and centripetal force
- Supports lessons on speed, radius, mass and inward force
- Designed to improve accuracy during classroom experiments
- Safer alternative to outdoor washer-and-cord style demonstrations
- Suitable for school, university and teaching laboratory use
- Moving parts should be handled carefully during operation
- Use under appropriate laboratory or educational supervision
AUD 211.90 (Ex GST)
Mini Projectile Launcher, Student Mechanics Experiment with Protractor
- Mini projectile launcher for trajectory and projectile motion experiments, classroom mechanics practical tool.
- Adjustable release latch locks to set launch condition, supports repeatable launches for comparisons.
- Attached protractor for angle setting, plumb bob included for inclination reference and alignment.
- Two drilled balls supplied, consistent projectiles for repeated trials and group activity use.
- Tabletop clamp and instructions included, stable mounting and guided setup for student demonstrations.
AUD 136.90 (Ex GST)
Steel Ball Set for Physics Classrooms and Teaching Lab, Set of 20 Each
- Set of steel balls for basic science and physics experiments
- Includes 20 balls of each listed size
- Sizes included: 12.7 mm, 16 mm and 19 mm diameter
- Total set contains 60 steel balls
- Suitable for rolling, colliding and falling experiments
- Useful for motion, collision, momentum and free fall demonstrations
- Practical for school, university and teaching laboratory use
- Helps support repeat trials and group practical activities
- Confirm apparatus compatibility before use
- Steel balls only, ramps and experiment apparatus are not included
- Small balls may present choking or projectile hazards
- Use under appropriate laboratory or educational supervision
AUD 42.50 (Ex GST)
didn't see what you are looking for ?
We’ll source it or make it for you. LabChoice supports your research every step.