Animal Kingdom Specimens in Resin, Set of 20
- Animal kingdom specimen set for laboratory and educational use
- Includes 20 specimens embedded in resin as listed
- Resin mounting supports safer handling and observation
- Storage box included as listed
- Suitable for biology, zoology and classification lessons
- Helps students observe animal body structures and diversity
- Includes insects, arachnids, fish, amphibian, reptile, bird and other animal specimens
- Useful for taxonomy, morphology and life science demonstrations
- Resin specimens reduce direct handling of preserved biological material
- Confirm specimen list and appearance before ordering if exact matching is required
- Do not cut, heat, polish, drill or open the resin blocks
- Use under appropriate laboratory or educational supervision
AUD 336.50 (Ex GST)
Anodised Aluminium Resonance Tube for Sound and Frequency Experiments
- Resonance tube for sound and wave demonstrations
- Made from anodised aluminium as listed
- Straight tube design for simple resonance experiments
- Tube diameter listed as 50 mm
- Tube length listed as 600 mm
- Used with a loudspeaker to create resonance
- Supports studies of frequency and tube length
- Useful for teaching standing waves and sound resonance
- Suitable for school and university physics laboratories
- See also Kundt’s Tube LC-80-SW1996-001 as listed
- Loudspeaker and signal generator are not included unless specified
- Use under appropriate laboratory or educational supervision
AUD 65.90 (Ex GST)
ASEP Circuits Kit with Wire Card, Lamps and Clips
- Basic circuits kit for laboratory and educational use
- Old ASEP design product as listed
- Low-cost kit for introducing simple electrical circuits
- Includes 2 small lamps and sockets as listed
- Includes 2 dry cells as listed
- Includes 4 Fahnstock clips as listed
- Includes resistance wire and copper wire in various sizes
- Wires are wound on a card former
- Card includes description and size of each metal as listed
- Demonstrates heating effects, wire types and resistance
- Smallest copper wire can be used as a fuse demonstration
- Use under appropriate laboratory or educational supervision
AUD 64.90 (Ex GST)
ASEP Powder-Coated Stream Tray
- Stream tray for erosion and river formation demonstrations
- IEC stream tray as listed
- Strong steel tray construction
- Powder coated against corrosion as listed
- Size listed as 825 × 370 × 100 mm
- Designed for use with sand and other compatible materials
- Water can be introduced to study erosion effects
- Useful for simulating soil, streams and river formation
- Suitable for earth science and environmental science teaching
- Practical apparatus for school and university laboratories
- Confirm drainage, bench support and cleanup method before use
- Use under appropriate laboratory or educational supervision
AUD 266.50 (Ex GST)
Aspirator Bottle Spare Tap
- Spare tap for compatible aspirator bottles
- Fits all aspirator bottle sizes in the compatible range
- Useful as a replacement part for damaged or worn taps
- Supports controlled liquid dispensing from aspirator bottles
- Suitable for laboratory and educational use
- Practical spare part for chemistry and general science laboratories
- Helps extend the working life of compatible aspirator bottles
- Confirm bottle compatibility and seal fit before use
- Supplied as spare tap only
- Use under appropriate laboratory or educational supervision
AUD 14.90 (Ex GST)
ASTM Test Sieve, 4 Inch, 304 Frame with 316 Mesh
- ASTM test sieve for detailed particle size analysis
- 4 inch diameter format, listed as 101.6 mm
- Frame made from 304 grade stainless steel
- Mesh made from 316 grade stainless steel
- Designed for reliable particle separation and classification
- Suitable for exact mesh analysis, testing and measuring
- 316 stainless steel mesh supports corrosion resistance
- 304 stainless steel frame supports durable routine handling
- Useful for powder-form materials and particulate samples
- Suitable for laboratories, pharmaceuticals, food, mining and construction
- Confirm required mesh size and aperture before ordering
- Use according to the approved laboratory or testing method
From AUD 89.90 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
ASTM Test Sieve, 8 Inch Brass Frame, Stainless Steel 302 Mesh
- ASTM Test Sieve designed for accurate laboratory particle size analysis
- Standard 8-inch diameter for routine sieve testing applications
- Durable brass frame with stainless steel wire mesh
- Precisely manufactured openings for reliable particle separation
- Available in ASTM mesh sizes ranging from No. 5 to No. 500
- Nominal aperture sizes from 4.00 mm down to 25 µm
- Suitable for manual sieving and compatible mechanical sieve shakers
- Supports soil, sand, aggregate, powder and mineral grading
- Brass lid and receiver variations available for compatible sieve stacks
- Ideal for agricultural, construction, research and industrial laboratories
From AUD 99.50 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
ASTM Test Sieves, 316 Stainless Steel, 8 Inch
- ASTM test sieves for detailed particle size analysis
- 8 inch diameter format, listed as 200 mm
- Frame and mesh made from stainless steel grade 316
- Designed to comply with ASTM test sieve requirements
- Suitable for precise mesh analysis and particle classification
- Heavy-duty stainless steel construction supports durability
- 316 stainless steel provides improved corrosion resistance
- Useful for powder, granule and particulate material testing
- Suitable for laboratories, pharmaceuticals, food, metallurgy and mining
- Also suitable for construction industry and quality control workflows
- Confirm required mesh size and aperture before ordering
- Use according to the approved laboratory or testing method
From AUD 234.90 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Atomic Molecular Model Kits, Junior and Senior Sets
- Atomic and molecular model kit range for chemistry teaching
- Suitable for constructing 3-dimensional molecular structures
- Useful for organic and inorganic chemistry demonstrations
- Junior set includes 30 lugs and 75 balls
- Junior set is supplied in a bag only
- Junior set should be used with the senior or teacher set
- Senior set includes 150 lugs and 370 balls
- Senior or teacher set is supplied in a plastic moulded box
- Large balls are listed as 25 mm
- Small balls are listed as 18.5 mm
- Components include balls and connecting lugs for model construction
- Use under appropriate laboratory or educational supervision
From AUD 64.90 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Atomic Orbital Molecular Model Set, 14 Model Kit
- Molecular model set for atomic orbital demonstrations
- Builds 14 distinct atomic orbital models
- Includes 1s and 2s unhybridised orbital models
- Includes 3 × 2p unhybridised orbital models
- Includes 5 × 3d unhybridised orbital models
- Includes combined 2s plus three 2p unhybridised orbital model
- Includes sp, sp² and sp³ hybridised orbital models
- Pink and purple pear-shaped lobes represent two wave phases
- White sphere represents the atomic nucleus
- Each model includes its own transparent display base
- Suitable for chemistry teaching and molecular structure demonstrations
- Use under appropriate laboratory or educational supervision
AUD 90.90 (Ex GST)
Autoclave Bags 121°C Natural Printed, 50 µm, Large, 910 x 720 mm, Pack of 50 / Ctn of 250
- Autoclave bags made from high-quality virgin HDPE material
- Heat resistant for compatible autoclave use up to 121°C
- Printed with biohazard logo for clear laboratory waste identification
- Natural colour bag with 50 µm thickness
- Large size listed as 910 x 720 mm
- Supplied as pack of 50, with carton quantity of 250
AUD 133.00 (Ex GST)
Autoclave Bags 121°C Natural Printed, 50 µm, Medium, 700 x 550 mm, Pack of 50 / Ctn of 250
- Autoclave bags made from high-quality virgin HDPE material
- Heat resistant for compatible autoclave use up to 121°C
- Printed with biohazard logo for clear laboratory waste identification
- Natural colour bag with 50 µm thickness
- Medium size listed as 700 x 550 mm
- Supplied as pack of 50, with carton quantity of 250
AUD 95.00 (Ex GST)
Autoclave Bags 121°C Natural Printed, 50 µm, Small, 630 x 270 mm, Pack of 50 / Ctn of 500
- Autoclave bags made from high-quality virgin HDPE material
- Heat resistant for compatible autoclave use up to 121°C
- Printed with biohazard logo for clear laboratory waste identification
- Natural colour bag with 50 µm thickness
- Small size listed as 630 x 270 mm
- Supplied as pack of 50, with carton quantity of 500
AUD 99.00 (Ex GST)
Autoclave Bags 121°C Natural Printed, Medium, 700 x 550 mm, Pack of 50 / Ctn of 250
- Medium autoclave bag format for routine laboratory waste collection workflows
- 121°C heat resistance supports compatible sterilisation preparation before disposal
- Natural colour design suits general laboratory waste-handling applications
- Virgin HDPE construction supports practical strength during regular handling
- 700 x 550 mm size offers balanced capacity for bench, prep-room and lab use
- Pack of 50 / carton of 250 supports planned stock control and replenishment
AUD 122.00 (Ex GST)
Autoclave Bags 121°C Natural Printed, Small, 630 x 270 mm, Pack of 50 / Ctn of 500
- Small autoclave bag format for bench-side and low-volume laboratory waste collection
- 121°C heat resistance supports compatible autoclave sterilisation workflows
- Natural colour design suits routine laboratory waste-handling applications
- Virgin HDPE construction supports dependable handling during daily lab use
- 630 x 270 mm size is practical for compact collection points and preparation areas
- Pack of 50 / carton of 500 supports bulk replenishment for laboratories and schools
AUD 84.00 (Ex GST)
Autoclave Bags 121°C Yellow Printed, 50 µm, Large, 910 x 720 mm, Pack of 50 / Ctn of 250
- Large autoclave bag format supports higher-capacity laboratory waste collection workflows
- Yellow printed design helps improve visibility at controlled waste collection points
- Virgin HDPE material supports dependable handling before compatible autoclave processing
- 121°C heat resistance suits routine sterilisation preparation in laboratory environments
- 50 µm thickness provides practical flexibility for day-to-day waste handling
- 910 x 720 mm size, supplied as pack of 50 / carton of 250 for planned replenishment
AUD 133.00 (Ex GST)
Autoclave Bags 121°C Yellow Printed, 50 µm, Medium, 700 x 550 mm, Pack of 50 / Ctn of 250
- Made from high-quality virgin HDPE material
- Heat resistant for compatible autoclave use up to 121°C
- Yellow colour format for visible laboratory waste segregation
- Printed with biohazard logo for clear waste identification
- 50 µm thickness for practical laboratory handling
- Medium size 700 x 550 mm, supplied as pack of 50 / carton of 250
AUD 95.00 (Ex GST)
Autoclave Bags 121°C Yellow Printed, 50 µm, Small, 630 x 270 mm, Pack of 50 / Ctn of 500
- Small autoclave bag format suits bench-side collection and lower-volume laboratory waste workflows
- Yellow printed design improves visibility for controlled waste segregation areas
- Virgin HDPE construction supports dependable handling before compatible autoclave processing
- 121°C heat resistance supports routine sterilisation preparation in laboratory environments
- 50 µm thickness provides practical flexibility for daily waste-handling use
- 630 x 270 mm size, supplied as pack of 50 / carton of 500 for bulk replenishment
AUD 98.00 (Ex GST)
Autoclave Bags 121°C Yellow Printed, 50 µm, XL, 1220 x 860 mm, Pack of 25 / Ctn of 100
- Made from high-quality virgin HDPE material
- Heat resistant for compatible autoclave use up to 121°C
- Yellow colour format for visible laboratory waste segregation
- Printed with biohazard logo for clear waste identification
- 50 µm thickness for practical laboratory handling
- XL size 1220 x 860 mm, supplied as pack of 25 / carton of 100
AUD 85.00 (Ex GST)
Autoclave Bags 131°C Natural Printed, 80 µm, Medium, 700 x 550 mm, Pack of 50 / Ctn of 250
- Higher 131°C rating supports more demanding compatible autoclave waste workflows
- 80 µm virgin HDPE construction provides added handling strength for routine laboratory waste loads
- Medium 700 x 550 mm format suits preparation areas, bench-side bins and shared lab spaces
- Natural printed design supports visible waste identification without heavy colour coding
- Biohazard logo helps separate controlled laboratory waste from general disposal streams
- Pack of 50 / carton of 250 supports regular replenishment for schools, labs and testing facilities
AUD 152.00 (Ex GST)
Autoclave Bags 131°C Natural Printed, 80 µm, Small, 630 x 270 mm, Pack of 25 / Ctn of 100
- Made from high-quality virgin HDPE material
- Heat resistant for compatible autoclave use up to 131°C
- Natural colour format for routine laboratory waste workflows
- Printed with biohazard logo for clear waste identification
- 80 µm thickness for stronger laboratory handling
- Small size 630 x 270 mm, supplied as pack of 25 / carton of 100
AUD 100.00 (Ex GST)
B.S.S. Viscometers, Autoclavable BORO 3.3 Glass
- B.S.S. glass viscometers for laboratory and educational use
- Made from 3.3 borosilicate glass
- Autoclavable glass construction
- Suitable for viscosity and flow time experiments
- Useful for student, training and teaching laboratory activities
- Available B.S.S. No. 1, 2, 3 and 4
- Supplied as 1 piece per pack
- Suitable for school, university and teaching laboratory use
- Handle carefully as precision laboratory glassware
- Confirm method, liquid compatibility and cleaning procedure before use
- Stand, clamp, timer and bath are not included unless specified separately
- Use under appropriate laboratory or educational supervision
Banana Plugs, 4mm
- Banana plug accessories for laboratory and teaching circuit connections
- Supports use with meters, power supplies and experiment boards
- 2 mm plug to 4 mm socket adaptor links different connector systems
- 4 mm stackable banana plugs support plug-through circuit connections
- Three wire termination methods support flexible cable attachment
- Colour options help with polarity marking and circuit identification
- Suitable for supervised electrical and electronics teaching setups
From AUD 5.50 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Bare Copper Wire, Standard Wire Gauge Electrical Reel Range
- Bare copper wire designed for laboratory electrical experiments, physics demonstrations and general-purpose applications
- Available in nine Standard Wire Gauge (SWG) sizes from 14 SWG to 30 SWG
- Copper wire diameters ranging from 0.31 mm to 2.0 mm
- Uninsulated copper construction suitable for electrical conductivity investigations
- Supplied in 125 g reels across all nine gauge sizes
- Additional 500 g roll available in 18 SWG
- 16 SWG wire measures approximately 6.75 metres per 125 g reel
- 18 SWG wire measures approximately 11.75 metres per 125 g reel
- Suitable for electrical circuits, electromagnetism demonstrations and wire resistance experiments
- Copper provides high electrical and thermal conductivity
- Different wire gauges support investigations of conductor diameter and electrical resistance
- Ideal for physics, electrical science, research and educational laboratories
From AUD 21.50 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Basic Electronics Kit with Links and Signal Generator
- IEC Basic Electronics Kit for laboratory and educational use
- Designed for practical electronics and electrical circuit experiments
- Individually housed electronic components for organised circuit assembly
- Uses 2 mm banana plug connections for compact circuit arrangements
- Supports 4 mm connections using suitable adaptors where required
- Includes short connecting links to minimise loose wiring
- Components engage with a back panel for logical circuit construction
- Includes mini regulated power supply and mini signal generator
- Operates using a compatible 12 V PlugPak power source
- Supplied in a strong carry case with an experiment book
- Suitable for school, university and technical electronics teaching
AUD 1,153.50 (Ex GST)
Basic Solar Education Kit in Jar
- Basic solar education kit for science and STEM learning
- Supplied in jar for compact classroom storage
- Includes motor for motion demonstrations
- Includes solar cell for solar energy activities
- Includes wire for simple circuit connection
- Includes fan for mechanical output demonstration
- Includes buzzer for sound output demonstration
- Includes lamp for light output demonstration
- Useful for teaching solar energy and energy conversion
- Suitable for school, university and teaching laboratory use
- Confirm circuit layout and component compatibility before use
- Intended for laboratory or educational settings only
AUD 34.90 (Ex GST)
Battery Holder for 2 × 1.5 V AA Cells
- Battery holder designed for 2 × 1.5 V AA cells
- Suitable for laboratory and educational circuit experiments
- Holds batteries securely during demonstrations and student projects
- Provides a practical power source connection point for simple circuits
- Useful for low-voltage experiments with lamps, buzzers, motors and switches
- Supports introductory electricity and electronics activities
- Helps reduce loose battery connections during classroom use
- Suitable for school, university and STEM teaching environments
- Confirm polarity and circuit requirements before use
- Batteries are not included unless specified separately
- Avoid short circuits, overheating and incorrect battery installation
- Use under appropriate laboratory or educational supervision
AUD 1.90 (Ex GST)
Battery Holders for D Cells with 4 mm Terminals
- Battery holders for 1.5 V D cell batteries
- Available for 1, 2, 3 or 4 D cell configurations
- Fitted with 4 mm terminals for classroom circuit connection
- Suitable for laboratory and educational circuit experiments
- Helps hold batteries securely during demonstrations and student projects
- Provides a practical power source connection point for compatible circuits
- Useful for lamps, buzzers, motors, switches and low-voltage investigations
- 4-cell holder is listed with 1.5 V, 3 V, 4.5 V and 6 V output options
- 4-cell holder has listed size of 190 × 122 × 16 mm
- Batteries are not included unless specified separately
- Confirm polarity, voltage and circuit requirements before use
- Use under appropriate laboratory or educational supervision
From AUD 11.50 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Battery Hydrometer Acid Tester, High Quality
- Battery hydrometer acid tester for laboratory and workshop use
- Designed for checking battery acid specific gravity
- Measuring range listed as 1.10 to 1.30
- Brand listed as Thimson
- Boxed complete set as listed
- Includes glass tube as listed
- Includes rubber bulb as listed
- Includes hydrometer as listed
- Useful for compatible lead-acid battery electrolyte testing
- Helps indicate relative electrolyte density during battery checks
- Battery acid is corrosive and requires suitable PPE
- Use under appropriate laboratory or technical supervision
AUD 24.50 (Ex GST)
Baumé Hydrometer Brannan for Liquid Density Measurement, 305 mm
- Brannan Baumé hydrometer for laboratory and industrial liquid testing
- Designed for measuring liquids with specific gravity greater than water
- Baumé scale range listed as 0–70° Bé
- Overall hydrometer length of 305 mm
- Zero degrees Baumé corresponds to specific gravity of 1.000 at 60/60°F
- Manufactured in the United Kingdom by Brannan
- Part of Brannan's Twaddle and Baumé hydrometer range
- UKAS or traceable calibration certificates available upon request
- Suitable for liquid density and concentration monitoring applications
- Ideal for chemistry, research, quality control and industrial laboratories
AUD 78.90 (Ex GST)
Baumé Hydrometer Brannan for Measuring Liquids Heavier than Water
- Brannan Baumé hydrometers designed for measuring liquids heavier than water
- Available in 250 mm lengths with different measurement ranges
- Four variations covering 0–10, 10–20, 0–30 and 0–50° Baumé
- Zero degrees Baumé corresponds to a specific gravity of 1.000 at 60/60°F
- Manufactured in the UK by Brannan
- Part of Brannan's established Twaddle and Baumé hydrometer range
- Suitable for laboratory density measurement and quality control applications
- Optional UKAS or traceable calibration certificates available on request
- Designed for chemistry, research, industrial and educational laboratory use
From AUD 78.90 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Beaker Cleaning Brush, Nylon Bristles, 400 mm Length
- Beaker cleaning brush for laboratory glassware cleaning
- Suitable for cleaning beakers and similar wide laboratory vessels
- Nylon bristles for routine cleaning applications
- Bristle section listed as approximately 150 mm long
- Bristle width listed as approximately 80 to 85 mm
- Overall brush length listed as approximately 400 mm
- Metal wire handle for controlled manual cleaning
- White bristle colour
- Useful for school, university and general laboratory use
- Confirm vessel size and cleaning compatibility before use
- Avoid excessive force when cleaning glassware
- Use under appropriate laboratory or educational supervision
AUD 4.90 (Ex GST)
didn't see what you are looking for ?
We’ll source it or make it for you. LabChoice supports your research every step.