E
x
p
l
o
r
e
M
o
r
e
:
Sound & Waves
Anodised Aluminium Resonance Tube for Sound and Frequency Experiments
AUD 65.90(Ex GST)
AUD 65.90(Ex GST)
- Resonance tube for sound and wave demonstrations
- Made from anodised aluminium as listed
- Straight tube design for simple resonance experiments
- Tube diameter listed as 50 mm
- Tube length listed as 600 mm
- Used with a loudspeaker to create resonance
- Supports studies of frequency and tube length
- Useful for teaching standing waves and sound resonance
- Suitable for school and university physics laboratories
- See also Kundt’s Tube LC-80-SW1996-001 as listed
- Loudspeaker and signal generator are not included unless specified
- Use under appropriate laboratory or educational supervision
[request_quote_button]
- Description
Description
The Anodised Aluminium Resonance Tube, also known as a sound resonance tube, is designed for physics demonstrations involving resonance, sound waves and frequency-length relationships. This simple resonance tube consists of a straight piece of anodised aluminium tube with a listed diameter of 50 mm and a listed length of 600 mm. A loudspeaker can be used with the tube to create resonance, allowing students to investigate how sound frequency and tube length affect resonance conditions in an air column.
The apparatus is useful for teaching resonance, standing waves, wavelength, frequency response and acoustic behaviour in school and university physics laboratories. Users should confirm the required loudspeaker, signal source, frequency range, support method, tube positioning and experiment procedure before use. Avoid exposing the tube to impact, dents or rough handling, as deformation may affect the experiment setup and acoustic behaviour.
Sound experiments should be conducted at safe listening levels. Do not expose students or operators to excessive sound intensity during resonance demonstrations. This product is intended for laboratory or educational settings only and should be used under appropriate supervision. This item is supplied as the anodised aluminium resonance tube only. Loudspeaker, signal generator, amplifier, microphone, supports, clamps, Kundt’s Tube, worksheets and additional sound experiment accessories are not included unless specified separately.
LabChoice Australia supplies Resonance Tubes and sound wave teaching equipment for school science laboratories, university teaching laboratories and educational facilities requiring practical tools for frequency, wavelength and resonance demonstrations.
Chromatography Atomiser Sprayer Jointed with Rubber Bulb, BORO 3.3 Glass
From AUD 24.90 (Ex GST)
Rock Specimens For Geology - Pack of 10 Pcs
From AUD 24.90 (Ex GST)
Recording Timers with Kit, 50 Dots/sec AC or 25/50 Hz Electronic DC, 8 to 12V Power
From AUD 107.50 (Ex GST)
Sonometer Spare Set of Wires
AUD 18.90(Ex GST)
Bell Jar and Electric Bell Vacuum Experiment Kit
AUD 211.90(Ex GST)
Electrostatic Pith Balls, Laboratory Charge Study Model
From AUD 12.50 (Ex GST)
Extension Adapter Borosilicate Glass Laboratory Grade
From AUD 14.50 (Ex GST)
Multiple Connection Glass Bend Adapter (PIG Type) BORO 3.3
From AUD 59.90 (Ex GST)
Disposable Plastic Syringes, Luer Slip No Needle Liquid Handling Range
From AUD 14.90 (Ex GST)
You May Also Need
Advanced Resonance Apparatus with 1 m Vertical Scale Included
AUD 232.90(Ex GST)
Blued Steel Tuning Forks, Sound and Vibration Demonstration Range
From AUD 7.50 (Ex GST)
Chrome Plated Tuning Fork Set of 8 in Foam Case
AUD 33.90(Ex GST)
Melde’s Apparatus String Vibrator, 4–8 V AC Supply
AUD 230.50(Ex GST)
Powell’s Pattern Wave Motion Apparatus with Rotating Scale
AUD 219.50(Ex GST)
Savart’s Tone Wheel Alloy STEM Apparatus, 10 mm and 6 mm Diameter
AUD 109.90(Ex GST)
Siren Disc Blow Tube Only, Metal with Jet
AUD 9.50(Ex GST)
Sonometer Spare Set of Wires
AUD 18.90(Ex GST)
Sound Level Meter for Measuring Noise and Sound Levels
AUD 171.90(Ex GST)
Spare Bell for Bell Jar Experiment Kit
AUD 26.50(Ex GST)
Tuning Fork Set of 8, Blued Steel in Case
AUD 33.90(Ex GST)
Tuning Fork Set, 8 Pieces with Wooden Case and Hammer
AUD 118.50(Ex GST)
Tuning Forks on Resonance Boxes, Pair, 2 × 426.6 Hz
AUD 49.90(Ex GST)
Wooden Hollow Sonometer, 1 m, Mersenne’s Law
AUD 120.90(Ex GST)
[porto_related_products_slider]
Recently Viewed Products
SELECT OPTIONS
Metals Kit, Set of 8 Metal Rods
AUD 39.90(Ex GST)
SELECT OPTIONS
Infrared Digital Vortex Mixer with Flat Rubber Sleeve
AUD 847.50(Ex GST)
FEATURED PRODUCTS
BEST SELLING PRODUCTS
Petri Dishes, Polypropylene, Autoclavable & Reusable, High Quality
From AUD 1.20 (Ex GST)
Glass Petri Dishes with Lid, Autoclavable, Borosilicate Glass (BORO 3.3)
From AUD 3.90 (Ex GST)
Reagent Bottles, Wide Mouth, HDPE, Chemical-Resistant, Highly Reliable & Durable - Each
From AUD 1.50 (Ex GST)
LATEST PRODUCTS
Boss Head Clamp, 360° Rotatable Zinc for Retort Stands
AUD 26.90(Ex GST)
Cork Ring Support for Round-Bottom Flasks
From AUD 11.40 (Ex GST)
Carrier Tray, Polypropylene, for Laboratory Transport and Handling
AUD 59.90(Ex GST)
TOP RATED PRODUCTS
Boss Head Clamp, 360° Rotatable Zinc for Retort Stands
AUD 26.90(Ex GST)
Cork Ring Support for Round-Bottom Flasks
From AUD 11.40 (Ex GST)
Carrier Tray, Polypropylene, for Laboratory Transport and Handling
AUD 59.90(Ex GST)
What Our Customers Say
⭐⭐⭐⭐⭐
We ordered a set of customised BORO 3.3 borosilicate glassware for our teaching labs, and LabChoice Australia exceeded every expectation. From the first consultation to final delivery, their team listened carefully, offered expert advice, and ensured every piece matched our specifications perfectly.
The clarity and precision of the glassware are exceptional, and the quick turnaround made setup effortless. It’s refreshing to work with an Australian supplier who genuinely understands laboratory needs and takes pride in quality craftsmanship. We’ll definitely be returning to LabChoice for future glassware requirements
⭐⭐⭐⭐⭐
Our lab required high-precision BORO 3.3 glassware for analytical testing, and LabChoice Australia delivered outstanding results. The ordering process was simple, communication was clear, and every beaker and flask arrived perfectly calibrated and ready for use.
The quality of the glass is exceptional — resistant to heat, easy to clean, and consistently accurate in measurement. It’s reassuring to know there’s an Australian supplier that combines scientific precision with genuine customer care. I’d recommend LabChoice to any research team looking for dependable labware
⭐⭐⭐⭐⭐
We needed a set of customised borosilicate glassware for a specialised project, and LabChoice Australia delivered exactly what we envisioned. The team worked closely with us from design to production, ensuring every detail met our specifications. The craftsmanship is exceptional, and the turnaround time was impressive. It’s reassuring to know we can rely on them for unique, made-to-order pieces
⭐⭐⭐⭐⭐
LabChoice Australia has completely changed the way we source our lab glassware. The quality is consistently top-notch, and every piece meets the precision we need for reliable results. Their team knows their stuff, answers our questions quickly, and always goes the extra mile to help — they’re more like partners than just a supplier.
⭐⭐⭐⭐⭐
We trust LabChoice Australia because they deliver every time. Their borosilicate glassware is durable, accurate, and perfect for the high-heat work we do. Everything arrives well-packed with clear specs, so there are never surprises. It’s reassuring to deal with a supplier who understands both compliance and the demands of a busy lab