Warming Coil Septa Support Adapter, BORO 3.3 Glass - Each
- Warming coil septa support adapter for laboratory glassware setups.
- Made from BORO 3.3 glass for chemical and thermal resistance.
- Supports controlled heating or warming around compatible assemblies.
- Septa support design allows use with suitable sampling or sealing points.
- Clear glass construction supports visual inspection during operation.
- Suitable for chemistry, research and teaching laboratory applications.
$9.90 (Ex GST)
Watch Glasses, Soda Lime Glass, Laboratory Evaporation Cover Plates
- Manufactured from high quality soda lime glass for routine laboratory use
- Smooth, flat surface ideal for evaporation, sample observation, and small volume handling
- Commonly used as cover plates for beakers to reduce contamination and splashing
- Suitable for weighing solids, drying samples, and general laboratory handling
- Clear glass provides good visibility of samples during experiments
- Widely used in schools, universities, and routine laboratory applications
- Reliable laboratory-grade quality supplied by LabChoice Australia
From $10.99 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Water Bath Temperature Controller for Hot Plate
- Thermostat control for compatible IEC water bath and hot plate setup
- Fits to the edge of the IEC water bath
- Controls the hot plate to help hold water temperature constant
- Thermostat element slides down into the inner corner of the bath
- Probe can remain submerged when only a small water volume is used
- Suitable for wet water bath temperature control
- Can also support dry bath operation where the method is suitable
- For dry use, probe should press against the inside face of the metal bath
- Provides better regulation than manual hot plate adjustment
- Purchased separately from the IEC water bath
$236.90 (Ex GST)
Water Turbine Hydro-Electric Power
- Demonstrates hydro-electric power generation in classroom experiments
- Shows energy conversion from moving water to electrical output
- Suitable for renewable energy and sustainability lessons
- Helps teachers explain turbine-driven electricity generation
- Supports hands-on physics and environmental science activities
- Useful for group demonstrations and student observation
- For laboratory or educational use under appropriate supervision
$216.90 (Ex GST)
Water Turbine Hydro-Electric Power Demo Spare Belt
- Replacement belt for water turbine hydro-electric power demo
- Suitable for LC-80-EM1639-01 demonstration apparatus
- Supports continued operation of classroom hydro-electric experiments
- Approximate belt diameter is 70 mm
- Spare belt only, main demonstration unit not included
- Useful for routine maintenance or belt replacement
- For laboratory or educational use under appropriate supervision
$11.50 (Ex GST)
Weighing Measuring Scoop, BORO 3.3 Glass
- BORO 3.3 borosilicate glass weighing and measuring scoop for precise lab handling
- Suitable for transferring powders, crystals, and small solid samples
- Clear glass design allows easy visibility of sample quantity during use
- Good chemical resistance for routine laboratory weighing and preparation tasks
- Smooth formed surface helps with clean transfer and easy cleaning
- Reusable glass scoop for schools, universities, research, and industrial labs
- Ideal for sample prep, reagent handling, and general bench work in Australian laboratories
From $14.90 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Wimshurst Machine for Electrostatic Charge
- Demonstrates electrostatic charge generation, storage and visible discharge for physics education.
- Hand crank rotates twin plates in opposite directions to build static electricity.
- Leyden jar capacitors store charge before spark discharge between terminals.
- Mounted on a wooden base with rubber feet for stable classroom use.
- Compact demonstration size with 300 × 180 mm base and 300 mm height.
- Suitable for supervised lessons on electrostatics, induction, capacitance and electrical discharge, as students observe charge separation and transfer safely during guided classroom experiments.
$174.50 (Ex GST)
Wimshurst Machine Spare Belts, Replacement Belt Set
- Replacement belts for compatible Wimshurst machine demonstrations
- Suitable for LC-80-EM1641-01 Wimshurst machine
- Used to support plate rotation during electrostatics experiments
- Approximate belt circumference is 45 cm
- Suitable for approximately 140 mm diameter belt path
- Available as spare belt only or spare belt pair
- For laboratory or educational use under appropriate supervision
From $12.50 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Wireless Power Transfer Experiment Kit
- Wireless power transfer experiment kit for demonstrating the mechanism of wireless charging
- Helps explain the wireless charging principle used in smartphones and similar devices
- Includes small LED devices with built-in receiving coils
- Includes a flat coil for wireless power transfer
- USB power adapter is supplied for powering the transfer coil
- Demonstrates power transfer without direct wired connection between the LED device and flat coil
- LED devices light up when placed at the centre of the powered flat coil
- Suitable for classroom demonstrations, science learning and laboratory teaching workflows
- Supports practical understanding of coil-based power transfer and wireless energy transmission
- Placement, USB power connection and demonstration setup should be confirmed before use
$162.00 (Ex GST)
Wooden Double Burette Stand
- Double burette stand for holding two burettes during titration work
- Wooden construction provides stable bench support for routine laboratory use
- Nylon thumb screws support firm, adjustable clamping without direct metal contact
- Suitable for burettes down to 10 mm diameter as specified
- Supports side-by-side burette positioning for comparative or repeated trials
- Helps maintain vertical alignment for clearer meniscus reading
- Suitable for laboratory and educational use under appropriate supervision
$41.50 (Ex GST)
Wooden Funnel Holder on Stand, Single or Double Place
- Wooden funnel holder on stand for supporting compatible laboratory funnels
- Available in single-place and double-place configurations
- Varnished wooden construction supports routine laboratory and classroom use
- Single funnel holder includes clamping screw for practical height adjustment
- Single-place base size is stated as 200 × 110 mm with 460 mm rod height
- Double-place base size is stated as approximately 290 × 110 mm with 460 mm rod height
- Suitable for filtration, liquid transfer, sample preparation and teaching practicals
From $34.90 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Wooden Lab Disposable Stirrer - 114 x 10 x 2 mm
- Wooden disposable lab stirrers for quick manual mixing and sample handling
- Single use design helps reduce cross contamination between tests
- Lightweight and easy to handle for routine laboratory tasks
- Suitable for stirring, transferring, and blending small volumes
- Convenient option for schools, training labs, and general bench work
- Simple, cost effective consumable for day to day laboratory use
- Easy to store and dispense for fast workflow during repeated testing
- Ideal for non corrosive, low temperature applications where disposable tools are preferred
From $19.90 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Wooden V-Groove Lens and Mirror Holders, 50 mm and 75 mm
- Wooden lens and mirror holder range for classroom optics experiments
- Available for 50 mm diameter and 75 mm diameter lenses or mirrors
- V-shaped slot supports simple positioning of compatible optics
- Rectangular base provides practical bench support during use
- Suitable for holding lenses and mirrors in teaching demonstrations
- Useful for reflection, refraction and image formation activities
- Simple design supports student practical work and classroom setup
- Confirm lens or mirror diameter, thickness and fit before use
From $6.90 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
didn't see what you are looking for ?
We’ll source it or make it for you. LabChoice supports your research every step.