LCD Multifunctional Orbital Decolorizing Shaker with 3-Bar Universal Attachment, 100 to 800 rpm
- Supplied with universal attachment with 3 bars for compatible flask and vessel holding
- Universal attachment size is 25 x 24.5 cm for use with the shaker work plate
- Flask capacity supports 25 mL x 10, 50 mL x 8, 100 mL x 6, 250 mL x 4 and 500 mL x 2
- Multifunctional orbital decolorizing shaker for controlled laboratory shaking workflows
- Speed range supports 100-800 rpm for smooth and uniform orbital shaking
- Maximum load capacity is listed as 2.5 kg with platform
- Orbital motion type with 4 mm amplitude supports compatible sample mixing and decolorizing workflows
- Independent LCD display shows speed and time during routine operation
- Continuous or timer operation mode supports flexible laboratory workflow control
- Time setting range supports 1 minute to 99 hours 59 minutes
- Maintenance-free brushless DC motor supports stable long-term operation
- Over-speed detection and protection support safer routine use
- RS232 data connector supports PC control and data transmission
- Free software supports PC control and data logging based on supplied product features
- Platform compatibility, flask size, vessel type, load balance and speed setting should be confirmed before use
$1,387.00 (Ex GST)
LCD Multifunctional Orbital Decolorizing Shaker with 4-Bar Universal Attachment, 100 to 500 rpm
- Supplied with Universal Attachment with 4 bars for compatible flask and vessel holding
- Universal attachment size is 32 x 32 cm for use with the shaker work plate
- Flask capacity supports 25 mL x 21, 50 mL x 15, 100 mL x 12, 250 mL x 6 and 500 mL x 4
- Large multifunctional orbital decolorizing shaker for controlled laboratory shaking workflows
- Speed range supports 100-500 rpm for smooth and uniform orbital shaking
- Maximum load capacity is listed as 7.5 kg with platform
- Orbital motion type with 10 mm amplitude supports compatible sample mixing and decolorizing workflows
- Independent LCD display shows speed and time during routine operation
- Continuous or timer operation mode supports flexible laboratory workflow control
- Time setting range supports 1 minute to 99 hours 59 minutes
- Maintenance-free brushless DC motor supports stable long-term operation
- Over-speed detection and protection support safer routine use
- RS232 data connector supports PC control and data transmission
- Free software supports PC control and data logging based on supplied product features
- Platform compatibility, flask size, vessel type, load balance and speed setting should be confirmed before use
$1,489.00 (Ex GST)
LCD Orbital Decolorizing Shaker with Fixed Plate, 70 to 400 rpm, up to 3 kg Capacity
- Supplied with fixed plate for compatible routine orbital shaking workflows
- Fixed plate setup supports stable placement of compatible vessels and containers during operation
- Double-screen LCD display shows time and speed separately for clear monitoring
- Orbital decolorizing shaker for smooth and uniform laboratory shaking workflows
- Speed range supports 70-400 rpm for controlled orbital shaking
- Maximum load capacity is listed as 3 kg with platform
- Orbital motion type with 10 mm amplitude supports compatible sample shaking applications
- Continuous or timer operation mode supports flexible workflow control
- Time setting range supports 1 minute to 99 hours 59 minutes
- Maintenance-free brushless DC motor supports stable routine operation
- Over-speed detection and protection support safer laboratory use
- Compact footprint supports practical placement on laboratory benches
- Work plate dimension is listed as 335 x 335 mm
- Unit dimensions are listed as 420 x 370 x 100 mm, with 9.8 kg weight
- Fixed plate compatibility, vessel type, sample load, speed setting and operating conditions should be confirmed before use
$653.50 (Ex GST)
LCD Rocking Shaker with Non-Slip Dish Platform, 9° Tilt Angle, up to 10 kg Capacity, 10 - 70 rpm
- Supplied with dish platform, non-slip mat and 8 fixed strings for compatible vessel holding
- Dish platform dimension is listed as 30 x 28.5 cm
- See-saw rocking motion with 9° tilt angle supports gentle wave-style sample movement
- multifunctional rocking shaker for controlled laboratory mixing workflows
- Speed range supports 10-70 rpm for low-speed rocking operation
- Maximum load capacity is listed as 10 kg with platform
- Double LCD displays show time and speed independently for clear operation monitoring
- Continuous or timer operation mode supports flexible workflow control
- Electronic time switching range supports 1 minute to 19 hours 59 minutes
- Wide range of compatible platforms supports use with different vessels
- DC motor supports routine rocking operation
- Work plate dimension is listed as 300 x 285 mm
- Unit dimensions are listed as 360 x 410 x 200 mm, with 9 kg weight
- Platform compatibility, vessel type, load balance, speed setting and operating conditions should be confirmed before use
$1,489.00 (Ex GST)
LCD Touch Control Mini Dry Bath with Choice of 1 heating block, up to 100°C
- LCD touch control mini dry bath supplied with a choice of 1 compatible heating block
- Heating temperature range supports 25°C to 100°C for compact dry bath workflows
- Temperature setting range listed as room temperature +5°C to 100°C
- Temperature control accuracy specified as ±0.5°C with 0.1°C display accuracy
- Timer range supports 0 to 999 minutes or 0 to 999 seconds
- Heating from 25°C to 100°C is listed as ≤20 minutes
- Includes user recalibration, USB interface support, error code display and 9 program memory
$592.50 (Ex GST)
LDPE Dropping Bottle, Lab Dropwise Dispensing Bottle with Screw Cap
• LDPE dropping bottles for dispensing small uniform drops, supports controlled addition of liquids in lab and classroom activities
• Capacities listed 15, 30, 60, 125 and 250 mL, select volume to match reagent use and bench workflow
• Screw cap with attached cover helps reduce leakage risk and keeps dropper tip protected between uses
• Material stated low density polyethylene, suitable for lightweight, squeeze dispensing and routine laboratory handling
• Supports consistent reordering, label bottles clearly and use under appropriate supervision in educational settings
From $2.90 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Lead Acetate Indicator Paper Strips, Vial of 100
- Detect hydrogen sulfide in water, specified sensitivity down to 5 ppm for routine screening checks.
- Dip strip a few seconds, greying often begins around 1–3 ppm, darkens with concentration.
- Colour intensity can progress darker up to about 400 ppm, supports quick comparative assessment.
- Can be used as a moist strip for suspected H₂S areas, distilled water wetting is sufficient.
- Minimal cross-reactivity stated, thiols, thioketones, mercaptans give negative response for selectivity.
$13.90 (Ex GST)
LED 3D Shaker with Fixed Plate, 10° Tilt Angle, 10-80 rpm
- Fixed plate with anti-slip silicone disc surface supports stable sample placement
- Gentle 3D motion with fixed 10° tilt angle supports uniform shaking and mixing
- LED 3D shaker for flasks, culture flasks, Petri dishes and tubes
- Speed range supports 10-80 rpm for adjustable rotational mixing
- Maximum load capacity is listed as 2 kg with platform
- Independent LED displays show time and speed for clear operation monitoring
- Time setting range supports 1 minute to 99 hours 59 minutes
- Brushless DC motor supports stable routine operation
- Incubator compatible, subject to size, temperature, humidity and operating condition confirmation
- Suitable for cell culture workflows, DNA extraction, cell distribution and gel staining or destaining
- Work plate dimension is listed as 268 x 268 mm
- Unit dimensions are listed as 294 x 348 x 123 mm, with 3.7 kg weight
- Vessel type, load balance, incubator suitability, speed setting and operating conditions should be confirmed before use
$286.50 (Ex GST)
LED Constant Temperature Glass Bath with Separate Controller up to 25–240°C
- LED Constant temperature glass bath for controlled heating of laboratory liquids, samples and reaction vessels
- Heating temperature range supports 25°C to 240°C for compatible laboratory workflows
- Transparent glass bath supports easy observation of reactants and sample condition during heating
- Intelligent PID temperature control supports uniform and rapid heating performance
- Temperature control accuracy of heated liquids is listed as ±0.5°C
- Temperature display accuracy is listed as 0.1°C with LED temperature display
- PT1000 external temperature sensor supports accurate liquid temperature monitoring
- Remote controller operation supports safer use up to 1 m cable distance from the main unit
- Safety guard design helps prevent direct contact with the heating tube and supports stable vessel placement
- Over-temperature protection stops heating if overheating or sensor malfunction occurs
- Overcurrent protection and grounding fault protection support safer laboratory operation
- Temperature calibration and factory reset functions are included based on supplied features
- Optional magnetic stirrer can improve temperature uniformity within the bath
- Suitability, vessel size, liquid type, temperature setting and operating conditions should be confirmed before use
$633.50 (Ex GST)
LED Digital Double Module Dry Bath with Choice of 2 Heating Blocks, up to 105°C
- Double-module dry bath supplied with a choice of 2 compatible heating blocks
- Temperature control range from room temperature +5°C to 105°C
- Temperature setting range listed as 25°C to 105°C
- Accuracy stated as ±0.3°C at 25 to 90°C and ±0.6°C at 90 to 105°C
- Temperature uniformity listed as ±0.2°C at 37°C
- Timer range supports 0 minutes to 99 hours 59 minutes
- Includes external temperature sensor, overheating protection and sound reminder function
$1,041.00 (Ex GST)
LED Digital Double Module Dry Bath with Choice of 2 Heating Blocks, up to 150°C
- Double-module dry bath supplied with a choice of 2 compatible heating blocks for flexible sample handling
- Temperature control range from room temperature +5°C to 150°C for higher-temperature dry heating workflows
- Temperature setting range listed as 25°C to 150°C with precise digital adjustment capability
- Accuracy stated as ±0.3°C at 25 to 90°C and ±0.6°C at 90 to 150°C for reliable performance
- Temperature uniformity listed as ±0.2°C at 37°C to support consistent sample heating conditions
- Timer range supports 0 minutes to 99 hours 59 minutes for both short and extended procedures
- Includes external sensor, overheating protection and sound reminder function for safer routine operation
$1,143.00 (Ex GST)
LED Digital Dry Bath with Choice of 1 Heating Block, up to 120°C
- LED digital dry bath supplied with a choice of 1 compatible heating block for flexible sample handling
- Temperature control range from room temperature +5°C to 120°C for routine dry heating workflows
- Temperature setting range listed as 25°C to 120°C with clear digital temperature control
- Temperature control accuracy specified as ±0.5°C for reliable laboratory heating performance
- Temperature uniformity listed as ±0.5°C at 37°C to support consistent sample conditions
- Timer range supports 0 minutes to 99 hours 59 minutes for short and extended procedures
- Includes overheating protection, lid support and optional compatible heating block formats
$633.50 (Ex GST)
LED Digital Dry Bath with Fixed Block, up to 60°C
- Fixed dual-purpose heating block supports 5 mL x 30 and 10 mL x 8 tube positions
- Discrete heating temperature levels support 25°C, 30°C, 37°C, 45°C and 60°C operation
- Low-profile, space-saving design supports routine laboratory bench use
- LED digital dry bath for controlled fixed-block sample heating workflows
- Temperature control range supports room temperature +5°C to 60°C
- Temperature setting range includes 5 gears: 25°C, 30°C, 37°C, 45°C and 60°C
- Temperature control accuracy is specified as ±0.5°C
- Temperature display accuracy is listed as 0.1°C for clear monitoring
- Temperature uniformity at 37°C is specified as ±0.3°C
- Time setting range supports 0 minutes to 99 hours 59 minutes
- Timer function support is available for routine heating workflows
- LED display supports easy temperature and operation monitoring
- Fixed block format helps avoid separate block selection for compatible 5 mL and 10 mL tube workflows
- Tube compatibility, sample vessel size, temperature setting and operating conditions should be confirmed before use
$428.50 (Ex GST)
LED Digital Dry Bath with Single Point Callibration with Choice of 1 Heating Block, up to 120°C
- LED digital dry bath supplied with a choice of 1 compatible heating block
- Single point calibration configuration supports routine temperature verification workflows
- Temperature range from room temperature +5°C to 120°C
- Temperature setting range listed as 25°C to 120°C
- Temperature control accuracy specified as ±0.5°C
- Timer range supports 0 minutes to 99 hours 59 minutes
- Includes overheating protection, fitted lid and 0.1°C display accuracy
$735.50 (Ex GST)
LED Digital Glass Ceramic Hotplate with Package , 7 Inch, Heating Temperature up to 550°C
- 7-inch glass ceramic work plate supports chemical-resistant heating performance
- Heating temperature range from room temperature to 550°C in 5°C increments
- LED display shows temperature clearly for routine laboratory operation
- PT1000 external temperature sensor supports accurate sample temperature monitoring
- HOT warning flashes when the work plate temperature is above 50°C
- Separate overheating protection is set at 580°C for safer high-temperature use
- Compact single-position design supports routine benchtop heating and sample preparation
$837.50 (Ex GST)
LED Digital Glass Ceramic Hotplate, 7 Inch, Heating Temperature up to 550°C
- 7-inch glass ceramic work plate supports efficient heat transfer and chemical-resistant performance
- Heating temperature range from room temperature to 550°C in 5°C increments
- LED display shows actual temperature for clear routine monitoring
- PT1000 external temperature control supports sample monitoring with ±0.2°C sensor accuracy
- Separate safety circuit provides overheating protection at 580°C
- HOT warning flashes when the work plate temperature is above 50°C
- Compact single-position hotplate suitable for digestion, drying, concentration and sample pre-treatment
$775.50 (Ex GST)
LED Digital Magnetic Stirrer, 5 Inch, up to 3 L Capacity
- Digital speed control from 0 to 1500 rpm supports controlled laboratory stirring.
- Maximum stirring quantity supports up to 3 L H₂O for routine solution mixing.
- LED display shows stirring speed clearly for easy operation and monitoring.
- Compact design suits routine laboratory, school and education science use.
- Suitable for mixing samples, solutions, reagents and general laboratory liquids.
- Practical magnetic stirring option for the LabChoice Australia equipment range.
$245.50 (Ex GST)
LED Digital Single Module Dry Bath with Choice of 1 Heating Block, up to 105°C
- Single-module dry bath supplied with a choice of 1 compatible heating block for flexible sample handling
- Temperature control range from room temperature +5°C to 105°C for a wide range of heating applications
- Temperature setting range listed as 20°C to 105°C with precise digital adjustment capability
- Accuracy stated as ±0.3°C at 25 to 90°C and ±0.6°C at 90 to 105°C for reliable performance
- Temperature uniformity listed as ±0.2°C at 37°C to support consistent sample heating conditions
- Timer range supports 0 minutes to 99 hours 59 minutes for both short and extended procedures
- Includes USB interface, external sensor, overheating protection and sound reminder function for enhanced usability and safety
$633.50 (Ex GST)
LED Digital Single Module Dry Bath with Choice of 1 Heating Block, up to 150°C
- Single-module dry bath supplied with a choice of 1 compatible heating block for flexible sample handling
- Temperature control range from room temperature +5°C to 150°C for higher-temperature dry heating workflows
- Temperature setting range listed as 25°C to 150°C with precise digital adjustment capability
- Accuracy stated as ±0.3°C at 25 to 90°C and ±0.6°C at 90 to 150°C for reliable performance
- Temperature uniformity listed as ±0.2°C at 37°C to support consistent sample heating conditions
- Timer range supports 0 minutes to 99 hours 59 minutes for both short and extended procedures
- Includes external sensor, overheating protection and sound reminder function for safer routine operation
$775.50 (Ex GST)
LED Linear Decolorizing Shaker with Fixed Plate up to 2 kg, 40-200 rpm
- Supplied with fixed plate for compatible linear shaking workflows
- Linear motion with 20 mm amplitude supports uniform sample mixing
- Independent LED displays show speed and time for easier operation control
- Speed range supports 40-200 rpm for adjustable low-speed shaking
- Maximum load capacity is listed as 2 kg with platform
- Suitable for mixing in culture dishes, flasks and beakers
- Ideal for aeration and extraction applications
- Can be used in environmental chambers and CO2 incubators, subject to compatibility confirmation
- Continuous or timer operation mode supports flexible experiment control
- Time setting range supports 1 minute to 99 hours 59 minutes
- Maintenance-free brushless DC motor supports extended service life
- Safety speed protection helps support safer routine operation
- Work plate dimension is listed as 268 x 268 mm
- Unit dimensions are listed as 294 x 348 x 123 mm, with 3.4 kg weight
- Fixed plate compatibility, vessel type, load balance, chamber suitability and speed setting should be confirmed before use
$286.50 (Ex GST)
LED Magnetic Hotplate Stirrer Package, 5L Capacity
- LED display shows real-time temperature and stirring speed clearly.
- Adjustable heating temperature up to 280°C for routine lab work.
- Stable stirring performance supports uniform solution mixing.
- Dual temperature sensors monitor plate and solution temperature.
- “HOT” warning flashes above 50°C, even after power-off.
- Ceramic-coated heating plate resists corrosion, wear and heat.
$551.00 (Ex GST)
LED Magnetic Hotplate Stirrer with Package, 7 Inch Glass Ceramic Plate, up to 10 L Capacity
- LED magnetic hotplate stirrer package for heating and stirring workflows
- 184 × 184 mm, 7 inch glass ceramic work plate
- Maximum stirring quantity listed as 10 L for water
- Speed range from 0 to 1500 rpm with scale speed display
- Heating temperature range from room temperature to 550°C in 5°C increments
- LED temperature display shows actual temperature during operation
- PT1000 external temperature sensor supports ±0.2°C accuracy
- Hot warning activates at 50°C with overheating protection at 580°C
- Maximum magnetic stir bar length listed as 80 mm
- Package includes support clamp
$940.00 (Ex GST)
LED Magnetic Hotplate Stirrer, 7 Inch Glass Ceramic Plate, up to 10 L Capacity
- 7-inch glass ceramic work plate supports chemical-resistant heating and easy cleaning
- Stirring capacity up to 10 L of water supports routine laboratory mixing workflows
- Heating temperature range from room temperature to 550°C in 5°C increments
- Stirring speed range from 0 to 1500 rpm supports controlled magnetic stirring
- LED temperature display and scale speed control support simple daily operation
- PT1000 external temperature sensor supports sample monitoring with ±0.2°C sensor accuracy
- HOT warning, PID control and 580°C overheating protection support safer heating operation
$858.00 (Ex GST)
LED Multifunctional Orbital Decolorizing Shaker with Dish Attachment non slip mat, up to 2Kg, 40 to 200 rpm
- Supplied with dish attachment, non-slip mat and replaceable tray for compatible shaking workflows
- Dish attachment dimension is listed as 24 x 21.5 cm
- Non-slip mat supports more stable placement of compatible dishes and vessels during operation
- Replaceable tray supports practical setup changes for suitable laboratory applications
- Multifunctional decolorizing shaker for smooth and uniform laboratory shaking workflows
- Speed range supports 40-200 rpm for controlled low-speed orbital shaking
- Maximum load capacity is listed as 2 kg with platform
- Orbital motion type with 20 mm amplitude supports gentle shaking and decolorizing applications
- Double-screen LED display shows time and speed separately for clear operation monitoring
- Continuous or timer operation mode supports flexible workflow control
- Time setting range supports 1 minute to 99 hours 59 minutes
- Maintenance-free brushless DC motor supports stable routine operation
- Over-speed detection and protection support safer laboratory use
- Interchangeable plates support diverse laboratory applications
- Work plate dimension is listed as 268 x 268 mm with double-layer format
- Unit dimensions are listed as 294 x 348 x 123 mm, with 3.1 kg weight
- Dish size, vessel type, tray fit, load balance and speed setting should be confirmed before use
$428.50 (Ex GST)
LED Orbital Destaining Shaker with Remote Control, up to 2 kg Capacity, 40 to 200 rpm
- Remote-controlled decolorizing shaker with wireless module for flexible laboratory operation
- Dual-mode connection supports wireless and wired operation for different laboratory scenarios
- Remote control range is listed as over 10 m in unobstructed conditions
- Orbital shaker motion supports controlled shaking for compatible laboratory workflows
- Speed range supports 40-200 rpm for gentle and consistent sample movement
- LED display shows real-time speed and time during operation
- Timer setting range supports 1 minute to 99 hours 59 minutes
- 20 mm amplitude supports orbital shaking for compatible vessels and sample platforms
- Maximum load capacity is listed as 2 kg with platform
- Magnetic remote-control design allows attachment to metal surfaces for easier access and storage
- Type-C charging supports convenient charging of the remote-control system
- Safety RPM protection function supports safer routine operation
- DC brushless motor supports stable operation with 20 W total power rating
- Suitable for sterile, low temperature, enclosed, anaerobic or hazardous sample processing workflows
- Platform compatibility, vessel type, sample load, speed setting and operating environment should be confirmed before use
$449.50 (Ex GST)
LED Transference Decolorizing Shaker, 7° Tilt Angle, 10 to 80 rpm
- Fixed work plate supports compatible routine rocking and decolorizing workflows
- See-saw wave rocking motion with 7° tilt angle supports gentle sample movement
- Intelligent rocking decolorizing shaker for compact laboratory mixing workflows
- Speed range supports 10-80 rpm for controlled low-speed rocking operation
- Maximum load capacity is listed as 2 kg with platform
- Double LED displays show time and speed independently for clear monitoring
- Continuous or timer operation mode supports flexible experiment control
- Electronic time switching range supports 1 minute to 99 hours 59 minutes
- Fixed work plate dimension is listed as 268 x 268 mm
- Simple compact appearance helps save operating bench space
- DC motor supports routine rocking operation
- Unit dimensions are listed as 294 x 348 x 123 mm, with 3.1 kg weight
- Platform compatibility, vessel type, sample load, speed setting and operating conditions should be confirmed before use
$286.50 (Ex GST)
Lengthways Roller Attachment for Compatible Laboratory Shakers
- Lengthways roller attachment for compatible laboratory shakers
- Designed for separation funnel oscillation extraction workflows
- Suitable for compatible shaker systems
- Supports controlled lengthways rolling movement during extraction procedures
- Helps users select an attachment based on separation funnel handling needs
- Suitable where oscillation-style extraction support is required
- Confirm shaker compatibility, funnel size, attachment fit and load balance before use
Lens Cleaning Tissue, Pack of 100 Sheets, 10 × 15 cm
- Lens cleaning tissue for optical and polished glass surfaces
- Pack includes 100 sheets
- Sheet size listed as 10 × 15 cm
- Specially prepared for cleaning lenses, filters and polished glass
- Suitable for optics equipment, laboratory lenses and teaching apparatus
- Helps support careful cleaning without using ordinary paper tissue
- Brand listed as NewStar
- Confirm cleaning method and optical surface suitability before use
$8.50 (Ex GST)
Lever and Fulcrum Apparatus, Basic Mechanics and Lever Principle Demonstrator
- Lever and fulcrum apparatus for simple machine demonstrations, shows mechanical advantage and force direction change.
- Fulcrum position change alters lever arm distance, demonstrates moments and turning effect relationships clearly.
- Supports equilibrium experiments, balance conditions and rotational motion concepts using a pivoted rigid bar.
- Useful for force transfer demonstrations, compare load and effort placement along the lever.
- Classroom and laboratory teaching tool for practical understanding of levers, moments and basic mechanics.
$80.90 (Ex GST)
Lever and Fulcrum Set with Weights and Hangers Included 1 m long
- 1 m lever and fulcrum apparatus, metre rule balances at midpoint to demonstrate moments and equilibrium.
- Knife-edge pivot at centre with V-bearing support, consistent fulcrum seating for repeatable balance tests.
- Shows moment law, weight × distance equality on both sides, clear torque comparison along the rule.
- Includes two 50 g slotted weight carriers, hook over rule edge and slide to any marked position.
- Standard slotted masses not supplied, designed to use existing school weights with supplied carriers.
$211.90 (Ex GST)
Levo Pipette Controller
- Reduce hands-on time .
- Can realize the midway refill .
- Drip by drip drainage, precise control .
- Add the last drop of liquid discharge button
- Compatible with glass or plastic serological pipettes (0.1 - 100mL).
- 3μm replaceable hydrophobic filter.
- Fast suction, can absorb 25mL liquid in 4 secs.
- Humanized functional design, 118g ultra-light texture.
- Simple and sensitive liquid level regulation.
- Five color designs: blue, green, red, yellow, North Carolina blue, easy to distinguish between different applications.
From $49.50 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Levo Plus LCD Pipette Filler with Replaceable Battery, 0.1 to 100 mL
- Compatible with 0.1 to 100 mL glass and plastic serological pipettes
- Fast aspiration can draw 25 mL of liquid in approximately 4 seconds
- Drip-by-drip dispensing supports precise control during liquid delivery
- Midway refill function helps reduce hands-on time during repeated pipetting
- Last-drop discharge button supports complete liquid delivery when required
- Replaceable 3 µm hydrophobic filter helps protect the controller during use
- Ultra-light 118 g design supports comfortable handling during continuous pipetting
$184.50 (Ex GST)
didn't see what you are looking for ?
We’ll source it or make it for you. LabChoice supports your research every step.