PTFE Oval Stir Bars, For Round Bottom Flasks, L10 to L40 Sizes
- PTFE oval magnetic stir bars for round bottom flasks and boiling flasks
- Oval profile suits curved flask bases during magnetic stirring
- Designed to support stable rotation and reduce chatter during operation
- PTFE construction supports chemical resistance and easy cleaning
- Available in L10, L20, L25, L30 and L40 size options
- Suitable for routine laboratory stirring and educational demonstrations
- Use under appropriate supervision with compatible flasks and stirrers
From AUD 4.50 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
PTFE Smooth Stir Bars, General Purpose, Z10 to Z50 Sizes
- PTFE smooth stir bars for general purpose magnetic stirring applications
- Smooth cylindrical profile supports stable mixing in compatible vessels
- Suitable for routine solution preparation, reagent blending and bench stirring
- Designed to reduce chatter and support consistent magnetic coupling
- PTFE construction supports chemical resistance and easy cleaning
- Available in Z10, Z15, Z20, Z25, Z30, Z40 and Z50 sizes
- For laboratory or educational use only under appropriate supervision
From AUD 2.50 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Pulley in Sheave Frame with Hooks, 50 mm
- 50 mm moulded nylon pulley assembly for mechanics demonstrations
- Available in 1, 2, 3 and 4 sheave frame configurations
- Pressed aluminium frame supports lightweight classroom use
- Nylon pulley runs on a silver steel shaft for smooth cord movement
- Strong hooks at each end support practical hanging and rigging setups
- Screw and nut construction allows repair or modification by instructors
- Suitable for supervised force, tension and pulley system experiments
From AUD 18.90 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Pulley on Clamp, 50 mm Plastic Pulley
- Science pulley on clamp for physics experiments
- 50 mm diameter plastic pulley
- Clamp opening listed as 30 mm
- Suitable for force, motion and work demonstrations
- Useful for pulley, tension and load-direction experiments
- Supports mechanical advantage and simple machine activities
- Practical clamp design allows quick classroom setup
- Suitable for school, university and teaching laboratory use
- Can be used with compatible string, masses and force apparatus
- Confirm clamp opening and mounting surface before use
- Keep fingers clear of the rotating pulley during operation
- Use under appropriate laboratory or educational supervision
AUD 18.90 (Ex GST)
Pulley with Universal Clamp, 70 mm Plastic Pull
- Large pulley with universal clamp for physics experiments
- 70 mm plastic pulley mounted on a metal clamp
- Can clamp to bench edges up to 38 mm thick
- Can clamp to support rods up to 13 mm diameter
- Suitable for force, motion and mechanics demonstrations
- Useful for pulley, tension and load-direction experiments
- Supports simple machine and mechanical advantage activities
- Practical clamp design allows flexible classroom setup
- Suitable for school, university and teaching laboratory use
- Confirm bench thickness or rod diameter before use
- Keep fingers clear of the rotating pulley during operation
- Use under appropriate laboratory or educational supervision
AUD 31.50 (Ex GST)
Pycnometer Density Bottles, Borosilicate Glass
- Calibrated for accurate density determination
- Flat bottom design ensures stable placement
- Ground glass stopper with capillary bore
- Ideal for specific gravity analysis in labs
- Suited for chemicals, oils, and aqueous solutions
- Made from LabChoice BORO 3.3 glass – High quality
From AUD 11.50 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Rare Earth Neodymium Magnet, N35, 15 × 10 mm
- Rare earth neodymium magnet for laboratory and educational experiments
- Strong permanent magnet for magnetic force demonstrations
- Diameter listed as 15 mm
- Thickness listed as 10 mm
- Grade listed as N35
- Maximum working temperature listed as 80°C
- Suitable for magnetism, attraction and repulsion activities
- Useful for physics, STEM and general science demonstrations
- Compact format for practical classroom experiments
- Strong magnets can pinch skin during handling
- Keep away from sensitive electronics, magnetic cards and medical implants
- Use under appropriate laboratory or educational supervision
AUD 10.90 (Ex GST)
Reaction Flask, Round Bottom with Flat Flange Joint, BORO 3.3 Glass
- Round bottom reaction flask made from BORO 3.3 glass
- Wide neck design with large flat flange joint
- Suitable for reaction, mixing, preparation and process development workflows
- Large flange opening allows easier vessel access and cleaning
- Useful for adding and removing solids or resinous materials
- Compatible lids can be detached easily during setup and cleaning
- Large stirrers can be accommodated with suitable lids and fittings
- Flasks and lids using the same flange size are interchangeable
- Available capacities range from 250 mL to 20,000 mL
- Available flange bore sizes include 75 mm and 100 mm
- Suitable for laboratory, research and pilot plant applications
- Confirm lid, clamp, seal, stirrer and heating compatibility before use
Reagent Bottle Narrow Mouth with Glass Stopper, BORO 3.3
- BORO 3.3 glass supports chemical resistance and laboratory durability
- Narrow mouth design helps support controlled pouring and reduced splashing
- Glass stopper provides a secure and laboratory-suitable closure
- Clear glass body allows easy viewing of contents and liquid levels
- Suitable for reagents, prepared solutions, chemicals, and general lab liquids
- Useful for schools, universities, research, and quality control laboratories
- ISO 3585 and ASTM E438 quality references where documentation supports compliance
- Suitable for Australian laboratories requiring reliable reagent storage glassware
From AUD 6.80 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Reagent Bottle Narrow Mouth with PE Stopper
- Designed for safe storage of laboratory reagents, solutions, and liquid samples
- Narrow mouth design helps reduce spills and supports controlled pouring
- Made from soda lime glass for routine laboratory use
- ASTM quality suitability for dependable lab storage applications
- Supplied with PE stopper for secure closure and content protection
- Clear glass body allows easy visibility of stored liquids and fill levels
- Suitable for schools, universities, research labs, testing labs, and chemical preparation areas
- Practical choice for organised reagent storage in Australian laboratories
From AUD 6.50 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Red Rubber Pipette Filler Bulb, 3-Valve Silicone Type
- Red silicone pipette filler bulb with 3-valve control
- Designed for safe one-hand pipette filling operation
- Helps eliminate mouth pipetting for improved safety
- Valve A releases air from the pipette filler bulb
- Valve S controls liquid uptake and pipette filling
- Valve E controls delivery and liquid dispensing
- Stainless steel valve balls support chemical resistance
- Pinch-release valves allow smooth liquid flow control
AUD 20.00 (Ex GST)
Reduction / Reducer Adapter Borosilicate Glass Laboratory Grade
- Connects glassware of different joint sizes for seamless compatibility
- Ensures airtight, secure joints between apparatus of varying diameters
- Ideal for distillation, reflux, and custom lab setups
- Resistant to heat and chemical corrosion for long-lasting use
- Precision-crafted from BORO 3.3 borosilicate glass
- Manufactured and quality-tested by LabChoice Australia
From AUD 11.90 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Reflux Condenser Angled BORO 3.3 Borosilicate Glass
- Restricted Item – EUD Required: an End User Declaration (EUD) must be completed. A valid photo ID (such as a Passport, Driver Licence, or Proof of Age Card) is also required. Orders will not be shipped until all documentation is received and approved.
- Angled reflux condenser for smooth condensate return and stable reflux
- Ideal for organic synthesis, distillation and extended heating reactions
- High clarity BORO 3.3 glass for strong thermal and chemical resistance
- Efficient cooling pathway supports consistent vapour to liquid conversion
- Compatible with standard ground glass joints for easy system integration
- Made from LabChoice BORO 3.3 glass, high quality
From AUD 73.90 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Respiration Apparatus with Two Boiling Tubes, BORO 3.3 Glass
- Designed for comparing inhaled and exhaled air in biology experiments
- Includes two glass boiling tubes for separate airflow pathways
- Each tube is fitted with a two-hole rubber stopper
- Supplied with one short and one long 5 mm glass delivery tube per side
- PVC tubing connects both tubes to a central plastic T-piece
- Suitable for use with an appropriate carbon dioxide indicator solution
- Ideal for school biology, respiration and gas-exchange demonstrations
AUD 199.90 (Ex GST)
Retort Stand Kit, Laboratory Support Stand Set with Base, Rod and Clamps
- Laboratory retort stand kit with stable base, support rod, and clamps for secure setups
- Ideal for titration, filtration, heating, and general glassware support in lab work
- Adjustable clamp positions help achieve accurate height and angle alignment
- Suitable for schools, universities, research labs, and industrial QC environments
- Supports common apparatus such as burettes, funnels, flasks, condensers, and thermometers
- Strong, stable bench footprint helps reduce tipping during routine experiments
- Compatible with a wide range of clamp styles, check rod and bosshead fit
- High quality lab support solution from LabChoice Australia.
AUD 45.50 (Ex GST)
Ripple Tank for Wave Experiments, without Power Supply
- Ripple tank for demonstrating wave behaviour in physics and science education workflows
- Transparent acrylic plastic tank allows clear observation of ripple patterns and wave movement
- Tank is supported in a sturdy plastic frame with four legs and levelling feet
- Tank edges are shaped to help minimise undesired wave reflections during experiments
- Drain hole with rubber stopper supports easier water removal after use
- Adjustable horizontal rippler support rod allows height adjustment for experiment setup
- Ripple assembly uses a 4-6 V DC motor mounted on a wooden beam with eccentric weight for oscillation
- Two-point sources are provided using two plastic spheres mounted on right-angle rods
- Overall tank size is listed as 580 x 500 x 80 mm, with 370 x 280 mm window area
- Tank height above bench level is approximately 375 mm with legs attached
- Supplied accessories include straight obstacles, curved reflector, trapezoidal refraction plate, hand wave roller, water dropper, rubber bands, sponge and illuminant
- Illuminant includes a 12 V, 24 W lamp mounted in a lamp house with long supporting rod
- Product is supplied without power supply, so compatible power supply requirements should be confirmed before use
- Setup, water level, illuminant support, motor voltage and classroom safety procedures should be confirmed before operation
AUD 499.90 (Ex GST)
Rock Mineral and Fossil Specimens
- Educational geology specimen range for rocks, minerals and fossils
- Supports classroom identification, comparison and display activities
- Fossil collection includes 15 specimens with key sheet and geologic time chart
- Fossil set size is stated as 280 × 170 × 40 mm
- Rock collections support rock type classification and geology lessons
- Mineral and fluorescent mineral collections support specimen study and display
- For educational and display use only under appropriate supervision
From AUD 83.50 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Rocker Oil-Free Vacuum Pump for Clean Laboratory Vacuum Support
- Oil-free vacuum pump series for clean laboratory and industrial vacuum use
- Suitable for Rocker 300, 300DC, 400, 410, 800, 801, 810 and 811 models
- Compact oil-less pump design is lightweight and free from oil mist
- Prote overflow protection helps stop liquid being sucked into the pump
- Air inlet filter cartridge filters particles and moisture before pump entry
- Used for vacuum filtration, suspended solid testing and air sampling
From AUD 722.50 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Round Block with Holes For Tubes
- Round-hole blocks support tube heating across multiple hole sizes
- 20 hole and 12 hole formats suit varied dry block heater workflows
- Black anodised aluminium supports rapid heat transfer and heat-up
- L95 x W75 x H50 mm block size suits compatible dry block heaters
- Thermometer reference hole included for temperature reference use
- Evaporation manifolds and custom block depths are available to suit
From AUD 227.00 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Round Bottom Flask Three Neck Jointed BORO 3.3 Glass
- Restricted Item – EUD Required: For flask sizes 500 mL or larger, an End User Declaration (EUD) must be completed. A valid photo ID (such as a Passport, Driver Licence, or Proof of Age Card) is also required. Orders will not be shipped until all documentation is received and approved.
- High clarity BORO 3.3 glass supports heating, reflux and multi-step synthesis
- Three-neck design allows simultaneous stirring, reagent addition and monitoring
- Standard ground joints provide secure, leak-free connections to lab apparatus
- Excellent thermal and chemical resistance for organic, analytical and teaching labs
- Reliable choice for reaction setups, distillation and controlled reagent workflows
- Made from LabChoice BORO 3.3 glass – High quality
From AUD 36.90 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Rubber Adapter Cone Set for Filter Flasks
- Set of 8 rubber adapters for sealing glassware connections
- Made from white natural rubber for routine laboratory fitting use
- Tapered rubber design supports connection between compatible glassware items
- Size range includes listed dimensions from large to small adapter formats
- Useful for filtration, sealing and general glassware setup applications
- Not compatible with solvents, check chemical resistance before use
- Suitable for supervised laboratory and educational glassware workflows
- Colours available - Blue and Ivory
AUD 19.90 (Ex GST)
Rubber Cone Adapter for Vacuum Filtration Flask
- Forms a tight, reliable seal between a Büchner funnel and vacuum filtration flask
- Conical rubber design accommodates slight size variations for a secure fit
- Helps maintain stable vacuum, reducing leaks and improving filtration speed
- Chemical resistant rubber suitable for routine aqueous solutions and general lab use
- Supports cleaner filtration by minimising movement between funnel and flask
- Ideal for Büchner filtration setups in laboratories, schools, and industrial QA/QC
From AUD 7.90 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Rubber Mat for Air Lifting Atmospheric Pressure
- Rubber mat for demonstrating atmospheric pressure
- Designed for air lifting demonstration activities
- Helps show the effect of air pressure on a sealed surface
- Suitable for school physics and general science teaching
- Useful for pressure, force and air pressure demonstrations
- Popular classroom demonstration item
- Designed for use on compatible smooth, flat surfaces
- Supports practical learning in physics and STEM lessons
- Confirm surface suitability and lifting method before use
- Use under appropriate laboratory or educational supervision
AUD 92.50 (Ex GST)
Rubberised Laboratory Apron, Latex Warning, Acid Resistant, Multiple Sizes
- Rubberised cloth laboratory apron for classroom and laboratory protection
- Impermeable and easy-to-clean surface supports routine practical work
- Flexible, acid-resistant design suits chemistry, dissection and general science activities
- Available in Small, Medium, Large and XLarge size options
- Size details are listed as height × width for correct selection
- Latex warning applies, store away from heat to reduce discolouration and perishing
- For laboratory or educational settings only, use under appropriate supervision
From AUD 22.50 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Sacrometer, BORO 3.3 Glass, 100 mL, 32 mm OD
- Sacrometer made from BORO 3.3 borosilicate glass
- Capacity listed as 100 mL
- Supplied with base for stable bench placement
- Accurately graduated for routine laboratory use
- Outer diameter listed as 32 mm
- Wall thickness listed as 2 mm
- Tube length listed as 150 mm
- Suitable for laboratory and educational liquid measurement activities
- Clear glass body supports easy reading of liquid level
- Suitable for school, university and teaching laboratory use
- Handle carefully as laboratory glassware
- Use under appropriate laboratory or educational supervision
Safety Clamp for Gas Syringe, 100 ML
- Holds 100 mL gas syringes firmly during volumetric measurement
- Helps reduce breakage risk during practical science work
- Clamp end helps prevent accidental syringe piston fall-out
- Provides a reference point for piston travel distance
- Powder-coated finish supports smooth use and corrosion avoidance
- Suitable for compatible 100 mL gas syringe applications
AUD 49.00 (Ex GST)
Scale Pans with Hooks, Laboratory Weighing Unit
- Scale pans with hooks for mechanics, force and weighing demonstrations
- Suitable for hanging masses in pulley, spring and force experiments
- Traditional pans are stated as 75 mm diameter × 12 mm deep
- Available in plastic, aluminium and brass pan formats
- Strong hook is stated as the same style used in pulley sheaves
- Plastic version uses three miniature chains to connect pan to hook
- One-piece black nylon pan has integrated hook with no loose parts
From AUD 7.90 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Schlenk Reaction Flask Single Neck with Stopcock, BORO 3.3 Glass
- High clarity borosilicate glass supports inert and moisture sensitive reactions
- Single neck design allows secure attachment of condensers, adapters or septa
- Thermal and chemical resistance suits synthesis, purification and catalyst work
- Integrated PTFE stopcock enables controlled vacuum and gas line operation
- Reliable choice for research labs, universities and advanced teaching setups
- Made from LabChoice BORO 3.3 glass – High quality
From AUD 119.90 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Selectavolt Regulated DC Power Supply, 1.5 / 3 / 6 V
- Selectavolt regulated DC power supply for laboratory and education use
- Selectable output voltages of 1.5 V, 3 V and 6 V DC
- Output current listed as 2 A continuous or 3 A intermittent
- Smooth regulated DC output designed to simulate dry cell batteries
- Rear panel slide switch for voltage selection
- No AC output provided
- Output via 4 mm spin-free IEC terminals
- Rear 4 mm sockets permit trickle charging of compatible NiCd cells
- Suitable for school electricity, electronics and low-voltage circuit experiments
- Use under appropriate teacher or laboratory supervision
AUD 325.90 (Ex GST)
Self-Sealing Gas Cartridge for Portable Bunsen Burner
- Self-sealing gas cartridge designed for safe and convenient use with compatible portable Bunsen burners in laboratory environments
- Coleman 250 type cartridge, code 250, ensuring compatibility with standard portable burner fittings
- Contains a balanced propane and butane gas mix for consistent and reliable flame performance
- Cartridge content stated as 220 g, suitable for extended laboratory sessions
- Approximate burn time of 2.75 to 3 hours, depending on flame intensity and usage conditions
- Classified as dangerous goods, with freight surcharges applied by carriers
- Intended strictly for laboratory or educational use under appropriate supervision
AUD 18.90 (Ex GST)
Separating Funnel Kit Polypropylene with Stopcock, High Quality
- Polypropylene separatory funnel kit designed for safe liquid–liquid separation in routine laboratory work
- Integrated polypropylene stopcock provides smooth, controlled flow with reliable leak resistance
- Lightweight, impact resistant construction reduces breakage risk compared to glass funnels
- High chemical resistance to acids, alkalis, and most organic solvents
- Easy to clean and maintain, suitable for repeated laboratory use
- Ideal for educational laboratories, research facilities, quality control, and industrial applications
- High quality lab plasticware supplied by LabChoice Australia
From AUD 49.90 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Separating Funnel Kit PTFE Stopcock with SS Retort Ring, BORO 3.3 Glass
- Complete separatory funnel kit designed for efficient liquid liquid extraction and phase separation
- Precision PTFE stopcock provides smooth, leak free flow control and excellent chemical resistance
- Clear body allows easy visual identification of phase boundaries during separation
- Secure stopper and stopcock assembly supports safe handling of volatile or corrosive solvents
- Suitable for teaching labs, research laboratories, and routine analytical workflows
- Made from LabChoice BORO 3.3 glass – High quality
From AUD 69.90 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
didn't see what you are looking for ?
We’ll source it or make it for you. LabChoice supports your research every step.