Vacuum Trap Gas Washing Bottle, BORO 3.3 Glass
- BORO 3.3 glass supports chemical resistance and laboratory durability
- Helps reduce liquid carryover, backflow, and contamination risk
- Clear glass body allows easy viewing of liquid level and bubbling action
- Suitable for vacuum-assisted filtration, aspiration, and gas handling setups
- Useful for schools, universities, research, QC, and industrial laboratories
- Suitable for Australian laboratories requiring reliable gas washing glassware
From $64.94 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Variable AC/DC Power Supply, 0 to 25 V, Digital Voltmeters
- Variable AC/DC power supply for general laboratory use
- Smooth voltage adjustment from 0 to 25 V
- Provides both AC and DC output options
- Current rating listed as 10/6 A, depending on output mode
- Dual digital voltmeters monitor AC and DC output voltages simultaneously
- Large illuminated digits support clear voltage reading
- Separate 4 mm socket head spin-free terminals for AC and DC outputs
- Robust and compact design for teaching and laboratory benches
- Suitable for physics, electrical circuits and low-voltage experiments
- Use under appropriate teacher or laboratory supervision
$676.33 (Ex GST)
Variable High Voltage Power Supply, 0 to 500 V DC / 50 mA
- Variable high voltage power supply for laboratory and education use
- High voltage DC output listed as 0 to 500 V DC
- High voltage AC output listed as 0 to 300 V AC
- Maximum high voltage output current listed as 50 mA
- Includes digital meter for output monitoring
- Low voltage outputs listed as 2 × 6.3 V AC at 4 A
- 6.3 V AC outputs are normally used for electron tube heater applications
- Electronic overload trip protection
- Overload is reset by turning off the high voltage output
- Suitable for supervised physics, electronics and electron tube demonstrations
$482.63 (Ex GST)
Save 25%
Variable Speed LCD Digital Tube Roller, 6-Roller Type
- LCD displays speed and time clearly for convenient monitoring during routine operation.
- Variable-speed rocking and rolling provide gentle, consistent mixing for laboratory tubes and samples.
- Adjustable speed range from 10 to 70 rpm supports controlled sample processing.
- Six rollers support efficient mixing, straightforward tube handling and easy cleaning.
- Quiet, maintenance-free brushless DC motor supports reliable operation during extended laboratory use.
- Compatible with cold rooms and incubators for flexible daily temperature-controlled laboratory workflows.
$513.50 (Ex GST)
Variable Speed Tube Rotator, Digital Display Multi Angle Up to 40 rpm
- Variable speed tube rotator for controlled sample mixing in routine laboratory workflows
- Digital display supports clear speed setting and operating visibility
- Rotation speed range from 10 to 40 rpm for gentle tube mixing
- Interchangeable rotisserie paddles support multiple tube sizes in one compact unit
- Paddle angles can be independently adjusted from 0 to 90 degrees
- Back and forth oscillation every 40 degrees helps improve liquid mixing performance
- Compact plug and play design with quiet maintenance-free motor for bench use
$392.54 (Ex GST)
Variable Speed Vortex Mixer, up to 2700 rpm
- Variable speed vortex mixer for single tube mixing workflows
- Suitable for most test tubes up to 28 mm diameter
- Speed control range listed from 200 to 2700 rpm
- Manual mode activates when downward pressure is applied to the tube
- Automatic mode supports continuous operation
- Variable speed control supports gentle mixing through to vigorous vortex action
- Silicone mixing cup supports practical tube positioning during use
- Counterbalanced drive system supports quiet and smooth operation
- Power requirement listed as 240 V AC, 20 W
- Compact dimensions listed as H135 × D160 × W125 mm
$352.30 (Ex GST)
Vertical Splash Heads Adapter for Distillation Assemblies, BORO 3.3 Glass
- Restricted Item – EUD Required: an End User Declaration (EUD) must be completed. A valid photo ID (such as a Passport, Driver Licence, or Proof of Age Card) is also required. Orders will not be shipped until all documentation is received and approved.
- Designed to reduce splashing and liquid carryover during distillation
- Improves vapour control and protects condensers from contamination
- Suitable for standard laboratory distillation and reflux assemblies
- Provides stable vertical alignment within glassware setups
- Ideal for teaching, research, and industrial laboratory use
- Made from BORO 3.3 borosilicate glass for high thermal and chemical resistance
- Supplied by LabChoice Australia for consistent laboratory performance
From $14.24 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Vortex Mixer, Fixed Speed 3000 rpm Laboratory Mixing Type
- 3,000rpm for shaking to rapid mixing of samples
- Touch or continuous operation mode
- Includes a standard top head for mixing a single test tube or other small vessel up to 30mm in diameter
- Electronic speed control maintains constant speed even during changes in load
- Steel base with specially designed vacuum suction feet provides stability and dampens vibration
- Robust aluminum-cast construction
$227.83 (Ex GST)
Save 30%
Vortex Mixer, Portable Laboratory Mixing Type up to 3000 rpm
- Compact , portable and fits nicelyon bench-top (erase desktops and table tops)
- Touch operation,Fixed speed of 3,000rpm for rapid mixing of samples
- Powerful and efficient 12V DC brushless motor is smooth operation and has long life
- Foot pad design secures the mixer in place and does not wobble during operation
$146.25 (Ex GST)
Save 27%
Vortex Mixer, Variable Speed Laboratory Mixing Type up to 3000 rpm
- Variable speed of 0 to 3,000rpm for gentle shaking to rapid mixing of samples
- Touch or continuous operation mode
- Includes a standard top head for mixing a single test tube or other small vessel up to 30mm in diameter
- Electronic speed control maintains constant speed even during changes in load
- Steel base with specially designed vacuum suction feet provides stability and dampens vibration
- Robust aluminum-cast construction
$179.08 (Ex GST)
Warming Coil Septa Support Adapter, BORO 3.3 Glass - Each
- Warming coil septa support adapter for laboratory glassware setups.
- Made from BORO 3.3 glass for chemical and thermal resistance.
- Supports controlled heating or warming around compatible assemblies.
- Septa support design allows use with suitable sampling or sealing points.
- Clear glass construction supports visual inspection during operation.
- Suitable for chemistry, research and teaching laboratory applications.
$6.44 (Ex GST)
Watch Glasses, Soda Lime Glass, Laboratory Evaporation Cover Plates
- Manufactured from high quality soda lime glass for routine laboratory use
- Smooth, flat surface ideal for evaporation, sample observation, and small volume handling
- Commonly used as cover plates for beakers to reduce contamination and splashing
- Suitable for weighing solids, drying samples, and general laboratory handling
- Clear glass provides good visibility of samples during experiments
- Widely used in schools, universities, and routine laboratory applications
- Reliable laboratory-grade quality supplied by LabChoice Australia
From $7.14 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Water Bath Temperature Controller for Hot Plate
- Thermostat control for compatible IEC water bath and hot plate setup
- Fits to the edge of the IEC water bath
- Controls the hot plate to help hold water temperature constant
- Thermostat element slides down into the inner corner of the bath
- Probe can remain submerged when only a small water volume is used
- Suitable for wet water bath temperature control
- Can also support dry bath operation where the method is suitable
- For dry use, probe should press against the inside face of the metal bath
- Provides better regulation than manual hot plate adjustment
- Purchased separately from the IEC water bath
$153.99 (Ex GST)
Water Turbine Hydro-Electric Power
- Demonstrates hydro-electric power generation in classroom experiments
- Shows energy conversion from moving water to electrical output
- Suitable for renewable energy and sustainability lessons
- Helps teachers explain turbine-driven electricity generation
- Supports hands-on physics and environmental science activities
- Useful for group demonstrations and student observation
- For laboratory or educational use under appropriate supervision
$140.99 (Ex GST)
Water Turbine Hydro-Electric Power Demo Spare Belt
- Replacement belt for water turbine hydro-electric power demo
- Suitable for LC-80-EM1639-01 demonstration apparatus
- Supports continued operation of classroom hydro-electric experiments
- Approximate belt diameter is 70 mm
- Spare belt only, main demonstration unit not included
- Useful for routine maintenance or belt replacement
- For laboratory or educational use under appropriate supervision
$7.48 (Ex GST)
Weighing Measuring Scoop, BORO 3.3 Glass
- BORO 3.3 borosilicate glass weighing and measuring scoop for precise lab handling
- Suitable for transferring powders, crystals, and small solid samples
- Clear glass design allows easy visibility of sample quantity during use
- Good chemical resistance for routine laboratory weighing and preparation tasks
- Smooth formed surface helps with clean transfer and easy cleaning
- Reusable glass scoop for schools, universities, research, and industrial labs
- Ideal for sample prep, reagent handling, and general bench work in Australian laboratories
From $9.69 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Wimshurst Machine for Electrostatic Charge
- Demonstrates electrostatic charge generation, storage and visible discharge for physics education.
- Hand crank rotates twin plates in opposite directions to build static electricity.
- Leyden jar capacitors store charge before spark discharge between terminals.
- Mounted on a wooden base with rubber feet for stable classroom use.
- Compact demonstration size with 300 × 180 mm base and 300 mm height.
- Suitable for supervised lessons on electrostatics, induction, capacitance and electrical discharge, as students observe charge separation and transfer safely during guided classroom experiments.
$113.43 (Ex GST)
Wimshurst Machine Spare Belts, Replacement Belt Set
- Replacement belts for compatible Wimshurst machine demonstrations
- Suitable for LC-80-EM1641-01 Wimshurst machine
- Used to support plate rotation during electrostatics experiments
- Approximate belt circumference is 45 cm
- Suitable for approximately 140 mm diameter belt path
- Available as spare belt only or spare belt pair
- For laboratory or educational use under appropriate supervision
From $8.13 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Wireless Power Transfer Experiment Kit
- Wireless power transfer experiment kit for demonstrating the mechanism of wireless charging
- Helps explain the wireless charging principle used in smartphones and similar devices
- Includes small LED devices with built-in receiving coils
- Includes a flat coil for wireless power transfer
- USB power adapter is supplied for powering the transfer coil
- Demonstrates power transfer without direct wired connection between the LED device and flat coil
- LED devices light up when placed at the centre of the powered flat coil
- Suitable for classroom demonstrations, science learning and laboratory teaching workflows
- Supports practical understanding of coil-based power transfer and wireless energy transmission
- Placement, USB power connection and demonstration setup should be confirmed before use
$105.30 (Ex GST)
Wooden Double Burette Stand
- Double burette stand for holding two burettes during titration work
- Wooden construction provides stable bench support for routine laboratory use
- Nylon thumb screws support firm, adjustable clamping without direct metal contact
- Suitable for burettes down to 10 mm diameter as specified
- Supports side-by-side burette positioning for comparative or repeated trials
- Helps maintain vertical alignment for clearer meniscus reading
- Suitable for laboratory and educational use under appropriate supervision
$26.98 (Ex GST)
Wooden Funnel Holder on Stand, Single or Double Place
- Wooden funnel holder on stand for supporting compatible laboratory funnels
- Available in single-place and double-place configurations
- Varnished wooden construction supports routine laboratory and classroom use
- Single funnel holder includes clamping screw for practical height adjustment
- Single-place base size is stated as 200 × 110 mm with 460 mm rod height
- Double-place base size is stated as approximately 290 × 110 mm with 460 mm rod height
- Suitable for filtration, liquid transfer, sample preparation and teaching practicals
From $22.69 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Wooden Lab Disposable Stirrer - 114 x 10 x 2 mm
- Wooden disposable lab stirrers for quick manual mixing and sample handling
- Single use design helps reduce cross contamination between tests
- Lightweight and easy to handle for routine laboratory tasks
- Suitable for stirring, transferring, and blending small volumes
- Convenient option for schools, training labs, and general bench work
- Simple, cost effective consumable for day to day laboratory use
- Easy to store and dispense for fast workflow during repeated testing
- Ideal for non corrosive, low temperature applications where disposable tools are preferred
From $12.94 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Wooden V-Groove Lens and Mirror Holders, 50 mm and 75 mm
- Wooden lens and mirror holder range for classroom optics experiments
- Available for 50 mm diameter and 75 mm diameter lenses or mirrors
- V-shaped slot supports simple positioning of compatible optics
- Rectangular base provides practical bench support during use
- Suitable for holding lenses and mirrors in teaching demonstrations
- Useful for reflection, refraction and image formation activities
- Simple design supports student practical work and classroom setup
- Confirm lens or mirror diameter, thickness and fit before use
From $4.49 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
didn't see what you are looking for ?
We’ll source it or make it for you. LabChoice supports your research every step.