Wooden Double Burette Stand
$30.00(Ex GST)
$30.00(Ex GST)
- Double burette stand for holding two burettes during titration work
- Wooden construction provides stable bench support for routine laboratory use
- Nylon thumb screws support firm, adjustable clamping without direct metal contact
- Suitable for burettes down to 10 mm diameter as specified
- Supports side-by-side burette positioning for comparative or repeated trials
- Helps maintain vertical alignment for clearer meniscus reading
- Suitable for laboratory and educational use under appropriate supervision
[request_quote_button]
- Description
Description
The Wooden Double Burette Stand, also known as a double laboratory burette holder, is designed to support two compatible burettes during titration, liquid dispensing and routine volumetric work. It is suitable for school laboratories, university teaching laboratories, chemistry laboratories, preparation rooms and general laboratory workspaces.
The double holder design allows two burettes to be positioned side by side on the same stand. This is useful for comparative titrations, repeated trials, classroom demonstrations and practical setups where two dispensing lines need to be held securely. The wooden construction provides practical bench support for routine laboratory use. Its stable format helps keep burettes upright during filling, dispensing and meniscus reading, supporting more controlled titration workflows.
Nylon thumb screws provide firm, adjustable clamping while helping avoid direct metal-to-glass contact pressure points. This supports secure holding of compatible burettes while reducing the risk of unnecessary glass contact stress during setup. The stand is specified as suitable for burettes down to 10 mm diameter. Users should confirm burette diameter, clamping fit and bench stability before use, especially when working with filled glass burettes. Dimensions were not supplied, so bench footprint should be confirmed separately if minimum space requirements are important. The stand should be used on a stable, level surface during laboratory procedures.
LabChoice Australia supplies Wooden Double Burette Stands for school chemistry laboratories, university teaching laboratories, analytical laboratories, preparation rooms and general laboratory environments. They are suitable for supervised titration work, liquid dispensing, volumetric analysis and practical chemistry demonstrations using compatible burettes.
FAQs
Q: How many burettes can it hold?
A: Two burettes, double stand design.
Q: What is the minimum burette diameter it can clamp?
A: 10 mm diameter.
Q: What material is the stand made from?
A: Wood, with nylon thumb screws.
Q: What are the thumb screws used for?
A: Adjusting and securing the burette clamps.
Q: Is this suitable for teaching labs?
A: Yes, it is designed for stable, repeatable burette mounting in lab or education use.
Save 5%
Cone Adapter Straight with PTFE Stopcock Borosilicate Glass Laboratory Grade
From $18.00 (Ex GST)
Reading and Inspection Magnifiers, Handheld and Standing Lens Range
From $7.00 (Ex GST)
Reagent Bottle Narrow Mouth with PE Stopper
From $5.00 (Ex GST)
Conductivity Electrodes, Stainless Steel Type
From $36.00 (Ex GST)
Bottle Top Dispenser with recirculation valve
From $386.00 (Ex GST)
Unmounted Colour Filter Sheets
From $7.00 (Ex GST)
Amber Glass Vacuum Desiccator with Lid
From $392.00 (Ex GST)
ORP Sensor, Replacement Sensor for Pocket ORP Meter
$101.00(Ex GST)
You May Also Need
Adjustable Thermometer Holder Clamp with Bosshead
$11.00(Ex GST)
Boss Head Clamp for Lab Stands, Powder Coated, Heavy-Duty
From $5.00 (Ex GST)
Burette Clamp, Fisher Type, Powder Coated Steel, Single/ Double
From $5.00 (Ex GST)
Double Prong Retort Clamp with 360° Swivel and Bosshead
$20.00(Ex GST)
Laboratory Platform Jacks, Height Adjustable Apparatus Support Range
From $84.00 (Ex GST)
Laboratory Stainless Steel Platform Jack, Height Adjustable
From $212.00 (Ex GST)
Retort Clamp, Four Prongs, Powder Coated Finish, High Quality
From $9.00 (Ex GST)
Rubber Mat for Air Lifting Atmospheric Pressure
$66.00(Ex GST)
Safety Clamp for Gas Syringe, 100 ML
$35.00(Ex GST)
Three Finger Clamp with Double Adjustable Swivel Bosshead
$29.00(Ex GST)
[porto_related_products_slider]
FEATURED PRODUCTS
BEST SELLING PRODUCTS
Petri Dishes, Polypropylene, Autoclavable & Reusable, High Quality
From $1.00 (Ex GST)
Glass Petri Dishes with Lid, Autoclavable, Borosilicate Glass (BORO 3.3)
From $3.00 (Ex GST)
LATEST PRODUCTS
TOP RATED PRODUCTS
Biological Head Model on Base with Neck and Brain
$132.00(Ex GST)
Biological Nervous System Model on Board
$168.00(Ex GST)
Fibre Optics Educational Communications Kit
$40.00(Ex GST)
What Our Customers Say
⭐⭐⭐⭐⭐
We ordered a set of customised BORO 3.3 borosilicate glassware for our teaching labs, and LabChoice Australia exceeded every expectation. From the first consultation to final delivery, their team listened carefully, offered expert advice, and ensured every piece matched our specifications perfectly.
The clarity and precision of the glassware are exceptional, and the quick turnaround made setup effortless. It’s refreshing to work with an Australian supplier who genuinely understands laboratory needs and takes pride in quality craftsmanship. We’ll definitely be returning to LabChoice for future glassware requirements
⭐⭐⭐⭐⭐
Our lab required high-precision BORO 3.3 glassware for analytical testing, and LabChoice Australia delivered outstanding results. The ordering process was simple, communication was clear, and every beaker and flask arrived perfectly calibrated and ready for use.
The quality of the glass is exceptional — resistant to heat, easy to clean, and consistently accurate in measurement. It’s reassuring to know there’s an Australian supplier that combines scientific precision with genuine customer care. I’d recommend LabChoice to any research team looking for dependable labware
⭐⭐⭐⭐⭐
We needed a set of customised borosilicate glassware for a specialised project, and LabChoice Australia delivered exactly what we envisioned. The team worked closely with us from design to production, ensuring every detail met our specifications. The craftsmanship is exceptional, and the turnaround time was impressive. It’s reassuring to know we can rely on them for unique, made-to-order pieces
⭐⭐⭐⭐⭐
LabChoice Australia has completely changed the way we source our lab glassware. The quality is consistently top-notch, and every piece meets the precision we need for reliable results. Their team knows their stuff, answers our questions quickly, and always goes the extra mile to help — they’re more like partners than just a supplier.
⭐⭐⭐⭐⭐
We trust LabChoice Australia because they deliver every time. Their borosilicate glassware is durable, accurate, and perfect for the high-heat work we do. Everything arrives well-packed with clear specs, so there are never surprises. It’s reassuring to deal with a supplier who understands both compliance and the demands of a busy lab