Water Bath Temperature Controller for Hot Plate
$236.90(Ex GST)
$236.90(Ex GST)
- Thermostat control for compatible IEC water bath and hot plate setup
- Fits to the edge of the IEC water bath
- Controls the hot plate to help hold water temperature constant
- Thermostat element slides down into the inner corner of the bath
- Probe can remain submerged when only a small water volume is used
- Suitable for wet water bath temperature control
- Can also support dry bath operation where the method is suitable
- For dry use, probe should press against the inside face of the metal bath
- Provides better regulation than manual hot plate adjustment
- Purchased separately from the IEC water bath
[request_quote_button]
- Description
- Datasheets & Manuals
Description
The Water Bath Temperature Controller for Hot Plate, also known as a thermostat control for IEC water bath systems, is designed to control a compatible hot plate so the temperature in the IEC water bath can be held more consistently. This thermostat control, listed as LC-80-CH4240-101, fits to the edge of the IEC water bath and works with the hot plate to regulate heating during compatible laboratory and educational workflows. The thermostat element slides down to the inner corner of the bath, allowing it to remain submerged even when only a small volume of water is used. This supports practical temperature sensing during smaller-volume water bath applications.
The controller can maintain a set temperature in the bath when used wet or dry, provided the setup and method are suitable. When used dry, the probe should press against the inside face of the bath so it checks the temperature of the metal bath itself and helps avoid overheating. For approximate temperature control, careful adjustment of the hot plate heat regulator may keep the water bath reasonably steady. However, this method is not as regulated or accurate as using the thermostat control unit. This temperature controller is useful for biology practicals, sample warming, classroom water bath activities, teaching laboratory heating workflows and compatible dry bath applications using the IEC water bath and hot plate arrangement.
Users should confirm compatibility with the IEC water bath, hot plate, temperature requirement, wet or dry operating method and safety procedure before use. Hot water, heated metal surfaces and hot glassware should be handled with suitable PPE and supervision. This item is supplied as the water bath temperature controller only. IEC water bath, hot plate, test tube stands, tubes, thermometer, samples and additional accessories are not included unless specified separately.
LabChoice Australia supplies Water Bath Temperature Controllers for school science laboratories, biology classrooms, university teaching laboratories and general education environments requiring improved temperature control for compatible IEC hot plate water bath setups.
Datasheets & Manuals
Document :
Product Information Sheet(Pdf)
Jerrican with Cap, Leakproof Laboratory Storage and Transport Type - Each
From $61.50 (Ex GST)
Centre Zero Student Volt Meters, DC Polarity Teaching Type
From $43.90 (Ex GST)
Adam Luna LPB Precision Balances for Precision Lab Weighing
From $1,695.00 (Ex GST)
Microscope Lamps, Laboratory Illumination Type
From $71.90 (Ex GST)
Nickel Crucibles with Lids, 99% Pure, 15 mL to 70 mL
From $27.50 (Ex GST)
You May Also Need
10 Roller Tube Mixer
From $2,589.00 (Ex GST)
Block for Cuvettes
$392.00(Ex GST)
Block for Epp Tubes
From $255.00 (Ex GST)
Block for Falcon Tubes
From $255.00 (Ex GST)
CO₂ Orbital Shaker Aluminium Platform
$341.90(Ex GST)
Digital Wine Refractometer, 0 to 45% Brix, 0 to 22% VOL
$549.50(Ex GST)
Handheld Brix Refractometers, ATC Options
From $180.90 (Ex GST)
Humidity Measurement Instruments For Laboratory
From $12.50 (Ex GST)
Hybridisation Oven Platform
From $1,366.00 (Ex GST)
Laboratory Dry Bath Incubator
$976.50(Ex GST)
Medium Orbital Shaker Analogue
$2,062.00(Ex GST)
Mini Magnetic Stirrer, 1L and 2L Capacity , Brushless Motor
From $99.90 (Ex GST)
Round Block with Holes For Tubes
From $227.00 (Ex GST)
Variable Speed Vortex Mixer, up to 2700 rpm
$542.00(Ex GST)
Vernier Calipers For Laboratory and Educational Work
From $9.90 (Ex GST)
[porto_related_products_slider]
FEATURED PRODUCTS
BEST SELLING PRODUCTS
Glass Petri Dishes with Lid, Autoclavable, Borosilicate Glass (BORO 3.3)
From $3.90 (Ex GST)
Polypropylene Filter Funnels, 50 mm to 150 mm Range
From $1.50 (Ex GST)
LATEST PRODUCTS
Pointed Scalpel with Plain Handle, 35 mm
$4.90(Ex GST)
Stainless Steel Scalpel Handles for Dissection
From $4.50 (Ex GST)
IEC Simmerstat Magnetic Stirrer Hot Plate with PTFE Coated
TOP RATED PRODUCTS
Pointed Scalpel with Plain Handle, 35 mm
$4.90(Ex GST)
Stainless Steel Scalpel Handles for Dissection
From $4.50 (Ex GST)
IEC Simmerstat Magnetic Stirrer Hot Plate with PTFE Coated
What Our Customers Say
⭐⭐⭐⭐⭐
We ordered a set of customised BORO 3.3 borosilicate glassware for our teaching labs, and LabChoice Australia exceeded every expectation. From the first consultation to final delivery, their team listened carefully, offered expert advice, and ensured every piece matched our specifications perfectly.
The clarity and precision of the glassware are exceptional, and the quick turnaround made setup effortless. It’s refreshing to work with an Australian supplier who genuinely understands laboratory needs and takes pride in quality craftsmanship. We’ll definitely be returning to LabChoice for future glassware requirements
⭐⭐⭐⭐⭐
Our lab required high-precision BORO 3.3 glassware for analytical testing, and LabChoice Australia delivered outstanding results. The ordering process was simple, communication was clear, and every beaker and flask arrived perfectly calibrated and ready for use.
The quality of the glass is exceptional — resistant to heat, easy to clean, and consistently accurate in measurement. It’s reassuring to know there’s an Australian supplier that combines scientific precision with genuine customer care. I’d recommend LabChoice to any research team looking for dependable labware
⭐⭐⭐⭐⭐
We needed a set of customised borosilicate glassware for a specialised project, and LabChoice Australia delivered exactly what we envisioned. The team worked closely with us from design to production, ensuring every detail met our specifications. The craftsmanship is exceptional, and the turnaround time was impressive. It’s reassuring to know we can rely on them for unique, made-to-order pieces
⭐⭐⭐⭐⭐
LabChoice Australia has completely changed the way we source our lab glassware. The quality is consistently top-notch, and every piece meets the precision we need for reliable results. Their team knows their stuff, answers our questions quickly, and always goes the extra mile to help — they’re more like partners than just a supplier.
⭐⭐⭐⭐⭐
We trust LabChoice Australia because they deliver every time. Their borosilicate glassware is durable, accurate, and perfect for the high-heat work we do. Everything arrives well-packed with clear specs, so there are never surprises. It’s reassuring to deal with a supplier who understands both compliance and the demands of a busy lab
