Dry Block Heater
Dry Block Heaters are laboratory heating instruments used to provide controlled, uniform dry heating for tubes, vials and compatible sample blocks.Available in single, dual and four-block formats, they support temperature-controlled sample preparation, incubation and routine laboratory heating workflows.Australian laboratories, schools, universities and research facilities use dry block heaters for reliable, clean and efficient sample temperature control.
Digital Dry Block Heater, Dual Block, 200°C
- Dual block digital dry block heater for laboratory heating workflows
- Accepts 2 standard blocks or 1 compatible 96-well block
- Temperature range from ambient +5°C to 200°C
- 0.1°C digital operation and display indication
- Supports up to 40 × 1.5 mL tubes with suitable blocks
- Can run two different tube block inserts at the same time
- Nitrogen evaporation system available for compatible workflows
$1,532.00 (Ex GST)
Digital Dry Block Heater, Four Block, 200°C
- Four block digital dry block heater for high-capacity workflows
- Accepts 4 standard blocks or 2 compatible 96-well blocks
- Temperature range from ambient +5°C to 200°C
- 0.1°C digital operation and display indication
- Supports up to 80 × 1.5 mL tubes with suitable blocks
- Four individual heaters support dedicated block heating
- Nitrogen evaporation system available for compatible sample concentration
$1,844.00 (Ex GST)
Digital Dry Block Heater, Single Block, 200°C with LED Display
- Compact single block digital dry block heater
- Temperature range from ambient +5°C to 200°C
- Bright LED display with 0.1°C operation and display resolution
- Splash-proof keypad supports simple temperature setting
- Compatible with single position block inserts
- Requires only 130 mm bench width for compact placement
- Audible over-temperature alarm and cut-out support safer operation
$1,382.00 (Ex GST)
didn't see what you are looking for ?
We’ll source it or make it for you. LabChoice supports your research every step.
Dry Block Heaters provide controlled dry heating for compatible laboratory tubes, vials, plates and sample vessels. The range includes single-block, dual-block and four-block digital models, each listed with a maximum operating temperature of 200°C. The single-block version is also specified with an LED display.
Heat is transferred from the electrical heating system through a removable or fixed block to the sample vessel. The selected heating block must match the tube diameter, vessel shape and sample format to provide stable positioning and effective heat contact. Laboratories should confirm whether the required block is supplied or purchased separately.
Single-block models suit smaller workloads, while dual-block and four-block heaters provide greater capacity or allow compatible block formats to be used across larger sample batches. Actual heating time, temperature uniformity and sample capacity will depend on the selected model, block type, vessel material and operating conditions.
Electrical laboratory heating equipment should be operated on a stable bench with suitable ventilation and clearance around the unit. IEC 61010-1 provides general safety requirements for electrical laboratory equipment, while IEC 61010-2-010 covers equipment used for heating materials. Temperature performance may be checked using a calibrated reference sensor, with ASTM E220 providing a recognised method for thermocouple calibration. ISO/IEC 17025 is relevant where testing or calibration is completed by an accredited laboratory. These standards should not be presented as confirmed product compliance unless supported by manufacturer documentation.
For LabChoice Australia customers, the Dry Block Heater range provides practical single-block, dual-block and four-block options for universities, research facilities, quality control laboratories and routine sample preparation workflows requiring controlled heating up to 200°C.