Filter Paper, High-Quality, Fast Filtration & Superior Retention (Pack of 100 sheet)
- Fast filtration for improved lab efficiency
- Superior particle retention without clogging
- Lab-grade quality for consistent performance
- Used in gravimetric analysis, separation, and testing
- Suitable for schools, industry, and research labs
- Trusted consumable from LabChoice Australia
From $5.53 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Fine-Grade Copper Mesh Sheet, 150 × 150 mm
- Fine-grade copper mesh square, 150 × 150 mm, multipurpose lab consumable.
- Porous structure for fluid pass-through and particle capture during chemical filtration.
- Captures solid particles and impurities, application depends on process needs.
- Suitable for thermal insulation tasks where a mesh format is required.
- Can be used as gasket material, selection depends on mesh characteristics and fit
$26.98 (Ex GST)
Fire Syringe Fire Piston Kit, Classroom Gas Heating and Ignition Apparatus
• Fire syringe fire piston kit, rapid air compression demonstrator for gas heating and temperature rise.
• Shows work on gas increases temperature when compressed quickly into smaller volume.
• Visual ignition result with tinder, clear link between compression process and heat generation.
• Used in gas law teaching discussions, often referenced in Charles’s law and temperature behaviour lessons.
• Laboratory or educational use only, supervise closely, manage ignition safely and allow cooling after use.
$48.69 (Ex GST)
Fixed PSSC Type Power Supply, 12 V AC Input, 100/200 V DC Output
- Fixed PSSC type power supply for laboratory and education use
- Designed for the Mass of an Electron experiment
- Input listed as 12 V AC, 50/60 Hz
- Provides DC outputs for Magic Eye tube anode/cathode circuits
- Provides 6.3 V AC output for Magic Eye tube heater operation
- Dual outputs allow two experiments to be performed from one power supply
- Power-on LED indicator included
- Input fuse protection listed as 20 × 5 mm, 4 A
- DC outputs include simple resistive short-circuit protection
- Use only under appropriate teacher or laboratory supervisor control
$141.64 (Ex GST)
Fixed-Angle Rotor for Low-Speed Multi-Rotor Centrifuge, 12 x PCR8 Strips, up to 6000 rpm
- Fixed-angle rotor for compatible low-speed multi-rotor centrifuge systems
- Holds 12 x PCR8 strips based on the supplied rotor capacity
- Maximum speed is specified as 6000 rpm for compatible centrifuge operation
- Maximum RCF is listed as 4020 x g in the supplied product specifications
- Aluminium rotor material is listed in the supplied product data
- Biosealing is listed as Yes for this rotor configuration
- Rotor compatibility, PCR8 strip fit, biosealing setup, maximum speed and RCF should be confirmed before use
Fixed-Angle Rotor for Low-Speed Multi-Rotor Centrifuge, 18-Place for 5 mL Tubes, up to 6000 rpm
- Fixed-angle rotor for compatible low-speed multi-rotor centrifuge systems
- Holds 18 x 5 mL tubes based on the supplied rotor capacity
- Maximum speed is specified as 6000 rpm for compatible centrifuge operation
- Maximum RCF is listed as 4020 x g in the supplied product specifications
- Stainless steel body and aluminium buckets are listed in the supplied material details
- Biosealing is listed as Yes for this rotor configuration
- Rotor compatibility, 5 mL tube fit, bucket setup, biosealing, maximum speed and RCF should be confirmed before use
Fixed-Angle Rotor for Low-Speed Multi-Rotor Centrifuge, 30-Place for 15 mL Tubes, up to 4500 rpm
- Fixed-angle rotor for compatible low-speed multi-rotor centrifuge systems
- Holds 30 x 15 mL tubes based on the supplied rotor capacity
- Maximum speed is specified as 4500 rpm for compatible centrifuge operation
- Maximum RCF is listed as 3210 x g in the supplied product specifications
- Aluminium body and stainless steel adapter are listed in the supplied rotor material details
- Suitable for routine sample preparation, clinical processing and general laboratory separation workflows
- Rotor compatibility, tube size, adapter fit, maximum speed and RCF should be confirmed before use
Fixed-Angle Rotor for Low-Speed Multi-Rotor Centrifuge, 30-Place for 2 mL Tubes, up to 6000 rpm
- Fixed-angle rotor for compatible low-speed multi-rotor centrifuge systems
- Holds 30 x 2 mL tubes based on the supplied rotor capacity
- Maximum speed is specified as 6000 rpm for compatible centrifuge operation
- Maximum RCF is listed as 4020 x g in the supplied product specifications
- Aluminium rotor material is listed in the supplied product data
- Biosealing is listed as Yes for this rotor configuration
- Rotor compatibility, 2 mL tube fit, biosealing setup, maximum speed and RCF should be confirmed before use
Fixed-Angle Rotor for Low-Speed Multi-Rotor Centrifuge, 6-Place for 50 mL or 15 mL Tubes, up to 6000 rpm
- Fixed-angle rotor for compatible low-speed multi-rotor centrifuge systems
- Supports 6 x 50 mL tubes or 6 x 15 mL tubes based on the supplied rotor capacity
- Maximum speed is specified as 6000 rpm for compatible centrifuge operation
- Maximum RCF is listed as 4020 x g in the supplied product specifications
- Aluminium rotor material is listed in the supplied product data
- Biosealing is listed as Yes for this rotor configuration
- Rotor compatibility, tube size, biosealing fit, maximum speed and RCF should be confirmed before use
Fixed-Angle Rotor for Low-Speed Multi-Rotor Centrifuge, 60-Place for 2 mL Tubes, up to 6000 rpm
- Fixed-angle rotor for compatible low-speed multi-rotor centrifuge systems
- Holds 60 x 2 mL tubes based on the supplied rotor capacity
- Maximum speed is specified as 6000 rpm for compatible centrifuge operation
- Maximum RCF is listed as 4020 x g in the supplied product specifications
- Aluminium rotor material is listed in the supplied product data
- Biosealing is listed as Yes for this rotor configuration
- Rotor compatibility, 2 mL tube fit, biosealing setup, maximum speed and RCF should be confirmed before use
Fixed-Angle Rotor for Low-Speed Multi-Rotor Centrifuge, 8-Place for 50 mL Tubes or 16-Place for 15 mL Tubes, up to 5000 rpm
- Fixed-angle rotor for compatible low-speed multi-rotor centrifuge systems
- Supports 8 x 50 mL tubes or 16 x 15 mL tubes based on the supplied rotor capacity
- Maximum speed is specified as 5000 rpm for compatible centrifuge operation
- Maximum RCF is listed as 3960 x g in the supplied product specifications
- Aluminium body and stainless steel adapter are listed in the supplied rotor material details
- Suitable for laboratories requiring 50 mL and 15 mL tube support in one compatible rotor setup
- Rotor compatibility, 50 mL tube fit, 15 mL tube fit, adapter setup, maximum speed and RCF should be confirmed before use
Fixing Clip Attachment for Shakers
- Fixing clip attachment accessory for compatible laboratory shakers
- Available in two supplied platform size formats
- Larger fixing clip attachment measures 32 × 32 cm
- Compact fixing clip attachment measures 25 × 24 cm
- Helps users select the correct attachment by required platform size
- Suitable for compatible shaker vessel holding workflows
- Confirm shaker model, platform fit and fixing clip compatibility before use
Fixing Clip Range for Shaker
- Fixing clip accessory range for compatible laboratory shakers
- Suitable for LC-85 laboratory shaker
- Designed for organised flask holding on compatible shaker attachments
- Includes fixing clip options for 25 mL to 500 mL flask volumes
- Helps users select clips by flask size and attachment type
- Supports 330.2 and 180.2 attachment selection where applicable
- Combined range format keeps related flask clips easy to compare
- Confirm shaker compatibility, attachment type, flask size and clip quantity before ordering
Flask Base Stand Polypropylene, Durable Base for Round Bottom or Flat-Bottom Flasks
- Provides stable support for lab flasks
- Suitable for both round and flat bottom styles
- Chemical-resistant and easy to clean
- Polypropylene construction ensures long-term durability
- Used in research, teaching, and industrial labs
- Supplied by LabChoice Australia – Trusted quality
$9.07 (Ex GST)
flask clamps CO₂ Orbital Shaker Accessory Pack
- Accessory pack for compatible CO₂ orbital shaker
- Suitable for LC-80-GE2123-01
- Includes flask clamps for multiple flask capacities
- Includes 100 mL flask clamps × 2
- Includes 250 mL flask clamps × 4
- Includes 500 mL flask clamps × 4
- Includes 1000 mL flask clamps × 2
- Includes 2000 mL flask clamps × 2
- Includes aluminium platform × 1
- Confirm shaker model compatibility before ordering
$457.54 (Ex GST)
Flat Block for Vials
- 20 holes with 12.3 mm width and 24 mm depth for 2 mL vial block use
- Flat hole base type is listed for this 20 x 2 mL vial block format
- Chemical-resistant black anodised finish supports dry block heater use
- Thermometer reference hole supplied for block temperature reference checking
- L95 x W75 x H50 mm dimensions support compatible block heater placement
- Evaporation manifolds are available to suit compatible dry block applications
$165.10 (Ex GST)
Flat Bottom Flask Two Neck Jointed, BORO 3.3 Glass
- Restricted Item – an End User Declaration (EUD) must be completed. A valid photo ID (such as a Passport, Driver Licence, or Proof of Age Card) is also required. Orders will not be shipped until all documentation is received and approved.
- Two neck jointed flat bottom flask designed for simultaneous connections such as reflux, addition, or monitoring during reactions
- Flat bottom provides stable placement on hot plates and lab benches without external support
- Ideal for synthesis, distillation, reflux, and controlled laboratory reactions
- Clear borosilicate construction allows easy visual monitoring of contents and reaction progress
- Suitable for academic, research, and industrial laboratories requiring reliable jointed glassware
- Made from LabChoice BORO 3.3 glass – High quality
From $12.94 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Flat Glass Plates Set of 6 for Interference Experiments
- Flat glass plates set of 6 for Newton rings and thin air-film interference practicals.
- Two plates form an air wedge using thin paper spacer at one end, contact at other.
- Produces Newton rings style fringes as light passes glass, thin air layer, and returns through glass.
- Best viewed with monochromatic source, sodium light commonly used, to make band contrast and spacing clear.
- Enables measurement of bright and dark band spacing, supports air-wedge geometry discussions in optics lessons
$38.94 (Ex GST)
Flat Handle Dissecting Needles, Specimen Separation and Examination Type
- Flat handle dissecting needles for specimen separation and examination, supports controlled dissection work in labs and education
- Anti-roll flat handle design described, improves grip security and bench stability during manipulation of tissues and structures
- Straight arrow point option listed, suited to probing and positioning where a defined arrow tip is required
- Straight fine point option listed, supports more delicate handling and fine positioning during detailed dissection tasks
- Designed for scientific and medical learning contexts, select point type based on required control, handling style and specimen work
From $1.63 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Flat Plate Electrodes with Terminals, 75 × 25 × 3 mm
- Flat plate electrodes for conductivity and electrochemistry work
- Each electrode is supplied with a fitted terminal
- Consistent plate size of 75 × 25 × 3 mm across listed options
- Available in aluminium, carbon, copper, iron and lead
- Supports comparison of electrode behaviour between different materials
- Set of 5 includes aluminium, carbon, copper, iron and lead electrodes
- For laboratory or educational use under appropriate supervision
From $6.18 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Flat Rubber Sleeve For Digital Vortex Mixture
- Replacement flat rubber sleeve for compatible digital vortex mixers
- Helps support stable contact during sample mixing
- Suitable for routine vortexing and laboratory workflows
- Practical accessory for maintaining mixer usability
- Designed for use with compatible digital vortex mixer fittings
- Supplied by LabChoice Australia for lab equipment support
$8.13 (Ex GST)
Flat Stainless Steel Lid, IT1100 Bath Cover for Bridge Plate Setup
- Bridge plate for IT2400 to suit TH series immersion circulator use
- Easily removable design supports quick and easy cleaning after use
- Provides protection from steam to the connected TH unit during operation
- Required when both a TH immersion circulator and lid are being used
- No-port bridge plate version suits THx000 immersion circulator setups
- Bridge with recirculation ports is available as an alternative option
Flat Stainless Steel Lid, IT2400 Bath Cover
- Flat stainless steel lid designed to suit IT2400 bath with bridge plate
- Easily removable lid supports quick and easy cleaning after bath use
- Flat lid format supports IT2400 bath setups with bridge plate fitted
- Stainless steel construction is listed for this IT2400 flat bath lid
- Removable design supports simple handling during cleaning workflows
- Designed as a flat lid for IT2400 bath when used with a bridge plate
Flexible Magnetic Stir Bar Retriever, 40 cm Length, Spin Bar Removal
• Flexible magnetic stir bar retriever for removing spin bars from beakers, flasks and sample containers
• 40 cm length provides reach into deeper vessels, reduces the need to pour liquids to recover bars
• Magnetic tip captures PTFE coated stir bars through glass walls and narrow neck openings in typical labware
• Flexible shaft bends to follow vessel shape, helpful for round bottom flasks and curved container profiles
• For laboratory or educational settings only, use under supervision and rinse between samples to avoid cross contamination
$16.19 (Ex GST)
Flow Control Bend Adapter with Glass Stopcock BORO 3.3 Glass Laboratory Grade
- Provides precise control of gas or liquid flow in distillation and reflux setups
- Bent arm design allows easy alignment in complex glassware systems
- Integrated glass stopcock enables accurate flow adjustment and shutoff
- Made from LabChoice BORO 3.3 borosilicate glass for heat and chemical durability
- Ideal for organic synthesis, analytical, and vacuum applications
- Made from LabChoice BORO 3.3 glass – High quality
From $16.84 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Flow Control Bend Adapter with PTFE Stopcock, BORO 3.3 Glass, Laboratory Grade
- High-quality BORO 3.3 borosilicate glass ensures excellent chemical and heat resistance
- Precision PTFE stopcock allows smooth and accurate flow control
- Ideal for vacuum, distillation, and reflux operations in laboratories
- Compatible with standard ground-glass joints for easy integration
- Resistant to corrosion and contamination for long-term reliability
- Designed and supplied by LabChoice Australia – trusted laboratory glassware
From $16.19 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Fluoride Ion Standard Solution, 1 ppm Calibration for Pocket Fluoride Meter
- 1 ppm fluoride ion standard solution
- Designed for LAQUAtwin F-11 calibration
- Supports routine fluoride meter setup
- Suitable for standardisation and checking
- Practical solution for ongoing meter use
$71.50 (Ex GST)
Fluoride Ion Standard Solution, 10 ppm Calibration for Pocket Fluoride Meter
- 10 ppm fluoride ion standard solution
- Designed for LAQUAtwin F-11 calibration
- Supports routine fluoride meter setup
- Suitable for standardisation and checking
- Practical solution for ongoing meter use
$71.50 (Ex GST)
Fluoride Sensor, Replacement Sensor with 0.3 mL Direct Measurement
- Replacement fluoride sensor for LAQUAtwin F-11
- Direct measurement from 0.3 mL sample volume
- Supports 0.05 mL testing with Sampling Sheet B
- Sliding sensor guard helps scoop water samples
- Waterproof design for routine testing use
$148.01 (Ex GST)
Foldable Collapsible Crate
• Foldable collapsible crate for lab or classroom storage, opens for use and folds flat for space saving.
• Size 40 × 30 × 15 cm, compact footprint for benches, shelves, storerooms, and equipment organisation.
• Grey colour crate, simple identification in storage areas and easy matching with existing storage systems.
• Lightweight design, convenient for carrying supplies, consumables, and small equipment between rooms.
• Intended for laboratory or educational settings only, use under appropriate supervision as specified.
$11.38 (Ex GST)
Folding Linen Tester Magnifier, 5.5×, 30 mm
- Folding linen tester magnifier for close visual inspection
- Magnification listed as 5.5×
- Lens diameter listed as 30 mm
- Built-in stand supports hands-free viewing during inspection
- Integrated measuring scale supports basic size comparison
- Folding design supports compact storage and easy handling
- Suitable for textiles, paper, print, samples and teaching observations
- Confirm magnification, scale detail and inspection suitability before ordering
$8.13 (Ex GST)
Four-Sided Combination Test Tube Rack
- Four-sided combination rack for multiple laboratory tube sizes
- Rotates to any of four positions for flexible tube handling
- 40 place side for 12 mm tubes with 13 mm hole size
- 24 place side for 15 mL tubes, 20 place for 20 mm tubes
- 8 place side for 50 mL capacity tubes with 30 mm hole size
$16.19 (Ex GST)
didn't see what you are looking for ?
We’ll source it or make it for you. LabChoice supports your research every step.