Low-Speed Dual-Ring Centrifuge for 10 mL and 15 mL Tubes, up to 3,500 rpm
- Dual-ring rotor accommodates 12 × 10 mL tubes in the inner ring and 12 × 15 mL tubes in the outer ring
- Adjustable speed range from 100 to 3,500 rpm in 100 rpm increments
- Maximum relative centrifugal force of 2,260 × g supports routine low-speed sample separation
- Timed operation from 30 seconds to 99 minutes 59 seconds, with continuous mode available
- Six selectable deceleration levels help reduce sample disturbance during braking
- LCD shows speed, time and operating status for clear real-time monitoring
- Brushless DC motor and dynamically balanced rotor support operation at ≤55 dB(A)
- Description
Description
The Low-Speed Dual-Ring Centrifuge, also known as a general-purpose laboratory centrifuge, is designed for routine sample processing in compatible 10 mL and 15 mL centrifuge tubes. Its dual-ring rotor arrangement accommodates 12 × 10 mL tubes in the inner ring and 12 × 15 mL tubes in the outer ring, supporting efficient processing of commonly used laboratory tube formats.
The centrifuge provides an adjustable speed range from 100 to 3,500 rpm in 100 rpm increments and generates a maximum relative centrifugal force of 2,260 × g. Speed accuracy of ±20 rpm supports consistent operating conditions during routine separation procedures.
Timed operation can be set from 30 seconds to 99 minutes 59 seconds, while continuous mode is available for procedures requiring an unrestricted running period. These operating modes allow the centrifuge to support both short sample-processing cycles and extended centrifugation workflows.
One acceleration setting and six selectable deceleration levels allow the braking response to be adjusted according to the sample and laboratory method. Gentler deceleration can help minimise disturbance of separated liquid layers, suspended material or sediment at the end of the centrifugation cycle.
The LCD provides real-time visibility of speed, operating time and instrument status. A running-progress display, audible alert and status diagnostic system help users monitor the cycle and identify operating conditions during routine use.
A brushless DC motor supports dependable operation without routine motor-brush replacement. The high-strength rotor and dynamic balancing technology help maintain stable performance while limiting operating noise to no more than 55 dB(A), making the centrifuge suitable for laboratories where reduced noise is preferred.
The centrifuge can support routine sample clarification, separation of suspended material, preparation of biological or chemical samples and pre-analytical processing where compatible 10 mL or 15 mL tubes and low-speed centrifugation are specified. The rotor should be loaded symmetrically, and tube compatibility should be confirmed before operation.
LabChoice Australia supplies this Low-Speed Dual-Ring Centrifuge for clinical research, pathology, biotechnology, biochemistry, microbiology, pharmaceutical research, environmental testing, university teaching and general laboratory environments.
| Specification | Details |
|---|---|
| Product type | Low speed centrifuge |
| Speed range | 100 to 3,500 rpm |
| Speed increment | 100 rpm |
| Maximum RCF | 2,260 x g |
| Speed accuracy | ±20 rpm |
| Rotor capacity | 12 x 10 mL inner ring and 12 x 15 mL outer ring |
| Run time | 30 seconds to 99 minutes 59 seconds or continuous |
| Operation modes | Timed and continuous operation |
| Display | LCD |
| Display function | Real-time speed, time and operation status |
| Acceleration/Braking setting | 1 acceleration level and 6 deceleration levels |
| Braking function | Optimised braking curve to minimise sample disturbance |
| Motor type | Brushless DC motor |
| Power | 170 W |
| Dimensions | 481.5 x 414 x 253.5 mm |
| Weight | 15 kg |
| Noise level | ≤55 dB(A) |
| Noise control | High-strength rotor and dynamic balancing technology |
| Safety functions | Operation progress display, audible alarm and status diagnostic system |
Frequently Bought Together
Vortex Mixer, up to 3000 rpm
From $542.00 (Ex GST)
Concave Mirrors, 50 mm Diameter Classroom Optics Range
From $3.50 (Ex GST)
Distilling Flask with Side Arm, BORO 3.3 Glass
From $15.90 (Ex GST)
LCD Digital Magnetic Stirrer, Round Plate 5 Inch, up to 20 L Capacity
$1,195.50(Ex GST)
Laboratory Water Bath with Hot Plate
From $236.90 (Ex GST)
Glass Low Form Beaker BORO 3.3 Size 500 ML – 6 Pcs/Box
$36.10(Ex GST)
Similar Products
10 Roller Tube Mixer
From $2,589.00 (Ex GST)
Block for Epp Tubes
From $255.00 (Ex GST)
Flat Block for Vials
$254.00(Ex GST)
Hybridisation Oven
$6,274.00(Ex GST)
Laboratory Dry Bath Incubator
$976.50(Ex GST)
Laboratory Water Bath with Hot Plate
From $236.90 (Ex GST)
Micro Tray Block
From $308.00 (Ex GST)
Mini Magnetic Stirrer, 1L and 2L Capacity , Brushless Motor
From $99.90 (Ex GST)
Orbital Shaking Incubator
From $6,639.00 (Ex GST)
Recirculating Cooler with Tank
$8,262.00(Ex GST)
Round Block with Holes For Tubes
From $227.00 (Ex GST)
Simmerstat Hot Plates
From $580.90 (Ex GST)
Simple Heating Mantles, Controlled Heating for Round Bottom Flasks
From $311.50 (Ex GST)
[porto_related_products_slider]
FEATURED PRODUCTS
BEST SELLING PRODUCTS
Polypropylene Filter Funnels, Gravity Filtration Range
From $1.50 (Ex GST)
Glass Petri Dishes with Lid, Autoclavable, Borosilicate Glass (BORO 3.3)
From $3.90 (Ex GST)
What Our Customers Say
⭐⭐⭐⭐⭐
We ordered a set of customised BORO 3.3 borosilicate glassware for our teaching labs, and LabChoice Australia exceeded every expectation. From the first consultation to final delivery, their team listened carefully, offered expert advice, and ensured every piece matched our specifications perfectly.
The clarity and precision of the glassware are exceptional, and the quick turnaround made setup effortless. It’s refreshing to work with an Australian supplier who genuinely understands laboratory needs and takes pride in quality craftsmanship. We’ll definitely be returning to LabChoice for future glassware requirements
⭐⭐⭐⭐⭐
Our lab required high-precision BORO 3.3 glassware for analytical testing, and LabChoice Australia delivered outstanding results. The ordering process was simple, communication was clear, and every beaker and flask arrived perfectly calibrated and ready for use.
The quality of the glass is exceptional — resistant to heat, easy to clean, and consistently accurate in measurement. It’s reassuring to know there’s an Australian supplier that combines scientific precision with genuine customer care. I’d recommend LabChoice to any research team looking for dependable labware
⭐⭐⭐⭐⭐
We needed a set of customised borosilicate glassware for a specialised project, and LabChoice Australia delivered exactly what we envisioned. The team worked closely with us from design to production, ensuring every detail met our specifications. The craftsmanship is exceptional, and the turnaround time was impressive. It’s reassuring to know we can rely on them for unique, made-to-order pieces
⭐⭐⭐⭐⭐
LabChoice Australia has completely changed the way we source our lab glassware. The quality is consistently top-notch, and every piece meets the precision we need for reliable results. Their team knows their stuff, answers our questions quickly, and always goes the extra mile to help — they’re more like partners than just a supplier.
⭐⭐⭐⭐⭐
We trust LabChoice Australia because they deliver every time. Their borosilicate glassware is durable, accurate, and perfect for the high-heat work we do. Everything arrives well-packed with clear specs, so there are never surprises. It’s reassuring to deal with a supplier who understands both compliance and the demands of a busy lab