pH Meter Kit PH700-WW for Dirty Liquids and Wastewater, 0 to 14.00 pH

Description

pH Meter Kit PH700-WW for Dirty Liquids and Wastewater, 0 to 14.00 pH, also known as a benchtop pH meter kit for wastewater and slurry samples, is designed for laboratory pH measurement in dirty, suspended or mixed-phase liquid samples.

This kit is suitable for wastewater, suspensions, emulsions, slurries and compatible general water solutions. It is useful for testing workflows where particles, suspended matter or sample texture can make routine pH measurement more difficult with a standard general-purpose electrode.

The included LabSen® 333 pH / temperature electrode is engineered for dirty liquid samples and uses an open junction with a long-life reference system. This electrode selection helps support more practical pH measurement in samples where junction clogging can be a concern.

The meter supports 1–3 point automatic calibration with self-diagnosis and electrode condition display. These functions help users review calibration status and electrode condition before routine measurement.

Max / Min reading mode allows users to review the highest and lowest reading during a testing period, while 50-set data storage supports simple result recall directly on the meter. The IP54 spill-proof and dust-proof design supports routine benchtop laboratory use.

Included with this pH Meter Kit: PH700 Benchtop pH Meter, LabSen® 333 pH / Temperature Electrode, pH 4.00 Buffer Solution, pH 7.00 Buffer Solution, pH 10.01 Buffer Solution, 9V Power Adapter, Electrode Holder and User Manual.

Users should follow the correct calibration, rinsing, cleaning and storage procedure to support reading stability and electrode service life. Dirty samples should be tested with suitable electrode cleaning and handling after each measurement.

LabChoice Australia supplies pH Meter Kits for schools, universities, laboratories, wastewater testing users, QC teams and field-support workflows requiring benchtop pH measurement for dirty liquid sample applications.

Features

• PH700-WW benchtop pH meter kit
• Designed for dirty liquid sample testing
• Suitable for wastewater testing
• Suitable for suspensions
• Suitable for emulsions
• Suitable for slurries
• Also suitable for general water solution testing
• pH range: 0 to 14.00 pH
• LabSen® 333 pH / temperature electrode included
• Swiss LabSen 333 electrode design
• Open junction design
• Long-life reference system
• Measures pH and temperature on compatible meter setup
• 1–3 point automatic calibration
• Self-diagnosis function
• Electrode condition display
• Max / Min reading mode
• Stores up to 50 data sets
• IP54 spill-proof and dust-proof design
• Simple electrode holder included
• Electrode holder supports up to 2 electrodes
• Premixed pH calibration buffer solutions included
• pH 4.00 buffer solution included, 50 mL
• pH 7.00 buffer solution included, 50 mL
• pH 10.01 buffer solution included, 50 mL
• 9V power adapter included
• User manual included
• Calibration routine, electrode care, sample solids content, cleaning method and storage procedure should be confirmed before use

Warranty

The instrument is covered for defects in material and workmanship for two years, while the probe is covered for six months from delivery, subject to the manufacturer’s warranty terms.

The limited warranty does not cover issues caused by accidental damage, improper use, normal wear and tear, transport, storage, failure to follow product instructions, unauthorised maintenance, unauthorised modification, unauthorised repair, incompatible use with other products or materials, abuse, accidents or external causes beyond reasonable control.

Instrument Only