High-Speed Capillary Tube Centrifuge with 24-Place Rotor
- Speed range from 500 to 12,000 rpm, adjustable in 100 rpm increments
- Maximum relative centrifugal force of 13,680 × g for high-speed separation
- 24-place rotor accommodates up to 24 compatible capillary tubes
- LCD displays operating speed, RCF and run-time settings
- Timer range from 10 seconds to 99 minutes, with continuous operation available
- Maintenance-free brushless DC motor supports reliable routine laboratory use
- Door interlock, short-time run and audible alert functions support controlled operation
- Description
Description
The High-Speed Capillary Tube Centrifuge, also known as a microhaematocrit centrifuge, is designed for rapid centrifugal separation of samples contained in compatible capillary tubes. The supplied rotor accommodates up to 24 capillary tubes, supporting simultaneous processing of multiple samples in clinical, haematology, pathology, veterinary and medical research laboratories.
The centrifuge provides an adjustable speed range from 500 to 12,000 rpm in 100 rpm increments and develops a maximum relative centrifugal force of 13,680 × g. Speed accuracy of ±100 rpm supports controlled operation across routine high-speed centrifugation procedures. The required speed or RCF should be selected according to the capillary tube specification, sample type and validated laboratory method.
Its 24-place capillary tube rotor is suitable for laboratory workflows involving the centrifugal separation of small-volume samples. Typical applications include microhaematocrit and packed cell volume procedures, capillary blood sample processing and related clinical or research methods where high-speed centrifugation of capillary tubes is specified.
An LCD provides clear visibility of the operating settings, while the speed-to-RCF switching function allows users to monitor the selected centrifugal parameter. The run time can be programmed from 10 seconds to 99 minutes, and continuous operation is available for methods requiring an unrestricted run period. A short-time run function supports brief centrifugation steps, while the sound-alert function signals the completion of an operating cycle.
Acceleration to the selected speed and braking take approximately 40 seconds each. The integrated door interlock helps prevent access to the rotor during operation, supporting safer centrifuge use. A brushless DC motor provides dependable performance without routine brush replacement and is suitable for repeated laboratory centrifugation cycles.
LabChoice Australia supplies this High-Speed Capillary Tube Centrifuge for haematology, clinical diagnostic, pathology, hospital, veterinary, biomedical research, university and medical teaching laboratories.
| Specification | Details |
|---|---|
| Max. RCF | 13680 × g |
| Run time | 10sec-99min / Continuous |
| Power | 380 W |
| Dimensions [WxDxH] | 280×364×213 mm |
| Safety performance | Door interlock |
| Speed range | 500 – 12000rpm, increment: 100rpm |
| Speed accuracy | ±100 |
| Rotor capacity | 24×capillary tubes |
| Acceleration/Braking time | 40s↑40s↓ |
| Display | LCD |
| Voltage/Frequency | Single-phase, 200V-240V,50Hz/60Hz, 5A; |
| Motor type | Brushless DC motor |
| Weight | 8.5 Kg |
| Other functions | Speed/RCF switch; Short-time run function; sound-alert function |
Science Charts, Classroom Reference Posters for Lab Chemistry
From $47.50 (Ex GST)
ECOVAC Economical Vacuum Aspirator, 2L
Digital Laboratory Water bath, 7 L to 50 L with Heating Temperature Control
From $2,067.00 (Ex GST)
Polypropylene Draining Baskets, Autoclavable, With or Without Lid
From $9.90 (Ex GST)
Norwood-Style Glass Electrodes, Set of 4, Kit Components
$125.90(Ex GST)
Three-Way Glass Adapter, Dual Parallel Necks with 45° Side Arm BORO 3.3 Glass
From $31.90 (Ex GST)
Similar Products
5 Roller Tube Mixer
From $1,993.00 (Ex GST)
Block for Cuvettes
$392.00(Ex GST)
Block for Falcon Tubes
From $255.00 (Ex GST)
Digital Orbital Shaker
From $3,080.00 (Ex GST)
Humidity Measurement Instruments For Laboratory
From $12.50 (Ex GST)
Hybridisation Oven
$6,274.00(Ex GST)
Hybridisation Oven Platform
From $1,366.00 (Ex GST)
Immersion Cooler
$5,749.00(Ex GST)
Laboratory Water Bath with Hot Plate
From $236.90 (Ex GST)
Medium Orbital Shaker Analogue
$2,062.00(Ex GST)
Medium Reciprocating Shaker
$3,640.00(Ex GST)
Medium Rotary Mixer
$3,333.00(Ex GST)
Micro Tray Block
From $308.00 (Ex GST)
Simmerstat Hot Plates
From $580.90 (Ex GST)
Simple Heating Mantles, Controlled Heating for Round Bottom Flasks
From $311.50 (Ex GST)
[porto_related_products_slider]
FEATURED PRODUCTS
BEST SELLING PRODUCTS
Polypropylene Filter Funnels, Gravity Filtration Range
From $1.50 (Ex GST)
Glass Petri Dishes with Lid, Autoclavable, Borosilicate Glass (BORO 3.3)
From $3.90 (Ex GST)
What Our Customers Say
⭐⭐⭐⭐⭐
We ordered a set of customised BORO 3.3 borosilicate glassware for our teaching labs, and LabChoice Australia exceeded every expectation. From the first consultation to final delivery, their team listened carefully, offered expert advice, and ensured every piece matched our specifications perfectly.
The clarity and precision of the glassware are exceptional, and the quick turnaround made setup effortless. It’s refreshing to work with an Australian supplier who genuinely understands laboratory needs and takes pride in quality craftsmanship. We’ll definitely be returning to LabChoice for future glassware requirements
⭐⭐⭐⭐⭐
Our lab required high-precision BORO 3.3 glassware for analytical testing, and LabChoice Australia delivered outstanding results. The ordering process was simple, communication was clear, and every beaker and flask arrived perfectly calibrated and ready for use.
The quality of the glass is exceptional — resistant to heat, easy to clean, and consistently accurate in measurement. It’s reassuring to know there’s an Australian supplier that combines scientific precision with genuine customer care. I’d recommend LabChoice to any research team looking for dependable labware
⭐⭐⭐⭐⭐
We needed a set of customised borosilicate glassware for a specialised project, and LabChoice Australia delivered exactly what we envisioned. The team worked closely with us from design to production, ensuring every detail met our specifications. The craftsmanship is exceptional, and the turnaround time was impressive. It’s reassuring to know we can rely on them for unique, made-to-order pieces
⭐⭐⭐⭐⭐
LabChoice Australia has completely changed the way we source our lab glassware. The quality is consistently top-notch, and every piece meets the precision we need for reliable results. Their team knows their stuff, answers our questions quickly, and always goes the extra mile to help — they’re more like partners than just a supplier.
⭐⭐⭐⭐⭐
We trust LabChoice Australia because they deliver every time. Their borosilicate glassware is durable, accurate, and perfect for the high-heat work we do. Everything arrives well-packed with clear specs, so there are never surprises. It’s reassuring to deal with a supplier who understands both compliance and the demands of a busy lab