Low-Speed Clinical Centrifuge Multi-Tube Rotor with P1/P2 Programs, up to 5,000 rpm
- Adjustable speed range from 300 to 5,000 rpm in precise 10 rpm increments
- Maximum relative centrifugal force of 2,600 × g, adjustable in 10 × g increments
- Supports 6 × 1.5 to 5 mL, 7 mL, 10 mL or 15 mL tubes, and 4 × 20 mL or 50 mL tubes
- P1 and P2 programs provide convenient one-key access to routine centrifugation procedures
- LCD displays speed or RCF and operating time for clear monitoring
- One acceleration level and two deceleration settings support different separation requirements
- Brushless DC motor, automatic lid release and integrated safety monitoring support routine laboratory operation
- Description
Description
The Low-Speed Clinical Centrifuge, also known as a benchtop specimen centrifuge, is designed for routine sample separation in clinical diagnostic, pathology, biochemistry, blood bank, medical teaching and biomedical research laboratories. Its flexible rotor compatibility supports commonly used blood collection tubes, centrifuge tubes and larger-volume clinical sample containers.
The centrifuge operates from 300 to 5,000 rpm in precise 10 rpm increments and generates a maximum relative centrifugal force of 2,600 × g. RCF can be adjusted in 10 × g increments, while speed accuracy of ±20 rpm supports controlled and repeatable centrifugation. Users can select and display either rpm or RCF according to the laboratory method.
Supported rotor configurations accommodate 6 × 1.5 to 5 mL, 7 mL, 10 mL or 15 mL tubes, or 4 × 20 mL or 50 mL tubes. This tube-size flexibility allows the centrifuge to support serum, plasma, urine, faecal and other compatible clinical sample-processing workflows. The correct rotor, tube size, sample volume and balancing procedure should be selected according to the validated laboratory protocol.
Two programs, P1 and P2, allow routine centrifugation procedures to be accessed using one-key operation. Run time can be set from 30 seconds to 99 minutes, with continuous running available for extended procedures. The LCD provides clear visibility of speed, RCF and operating time, while the audible alert indicates completion of the centrifugation cycle.
One acceleration level and two selectable deceleration settings allow the stopping response to be matched to different sample requirements. A gentler deceleration setting can help reduce disturbance of separated serum, plasma, sediment or other sample layers when the laboratory method requires controlled braking.
The automatic lid-locking system restricts access to the rotor during operation and releases automatically after the centrifugation cycle has finished. Safety functions include a door interlock, overspeed detection and automatic internal diagnostics. The maintenance-free brushless DC motor supports repeated laboratory use without routine motor-brush replacement.
The compact centrifuge measures 300 × 240 × 180 mm and weighs 5.2 kg, supporting practical placement on clinical and laboratory benches. It operates from a single-phase 100 to 240 V, 50/60 Hz power supply with a rated power consumption of 70 W.
LabChoice Australia supplies this Low-Speed Clinical Centrifuge for clinical diagnostic laboratories, pathology laboratories, hospital laboratories, blood banks, biochemistry laboratories, urinalysis facilities, medical colleges and medical research institutes. It is suitable for routine separation of serum, plasma, urine, faecal samples and other compatible specimens using the appropriate rotor, balanced tube loading and validated centrifugation procedure.
| Specification | Details |
|---|---|
| Product type | Low speed centrifuge |
| Speed range | 300 to 5,000 rpm |
| Speed increment | 10 rpm |
| Maximum RCF | 2,600 x g |
| RCF increment | 10 x g |
| Speed accuracy | ±20 rpm |
| Rotor capacity | 1.5 to 5 mL, 7 mL, 10 mL and 15 mL x 6 |
| Run time | 30 seconds to 99 minutes, HD continuous running |
| Display | LCD |
| Safety devices | Door interlock, overspeed detector and automatic internal diagnosis |
| Acceleration/Braking setting | 1 acceleration setting and 2 deceleration settings |
| Preloaded programs | P1 and P2 |
| Motor type | Brushless DC motor |
| Power | Single-phase, 100 V to 240 V, 50 Hz/60 Hz, 70 W |
| Dimensions | 300 x 240 x 180 mm |
| Weight | 5.2 kg |
| Advanced features | Speed/RCF switch and sound-alert function |
| Lid function | Automatic lid-lock release after running |
Frequently Bought Together
pH Test Strips, Labortary beverage type
From $34.90 (Ex GST)
Pocket Nitrate Ion Meter, Single-Drop On-Site Testing
$764.50(Ex GST)
Jointed Powder Funnel, BORO 3.3 Glass
From $5.90 (Ex GST)
Test Tubes Round Bottom, Rimless, Heat Resistant, BORO 3.3 Glass
From $31.00 (Ex GST)
Save 23%
Air Condenser Borosilicate Glass BORO 3.3 Laboratory Grade
From $19.90 (Ex GST)
Similar Products
Block for Falcon Tubes
From $255.00 (Ex GST)
Digital Dry Block Heater with Microprocessor Control, 200°C with LED Display
From $1,382.00 (Ex GST)
Digital Laboratory Water bath, 7 L to 50 L with Heating Temperature Control
From $2,067.00 (Ex GST)
Digital Orbital Shaker
From $3,080.00 (Ex GST)
Hybridisation Oven Carousel Suit
From $1,216.00 (Ex GST)
Hybridisation Oven Platform
From $1,366.00 (Ex GST)
Laboratory Dry Bath Incubator
$976.50(Ex GST)
Medium Orbital Shaker Analogue
$2,062.00(Ex GST)
Medium Rotary Mixer
$3,333.00(Ex GST)
Recirculating Cooler with Tank
$8,262.00(Ex GST)
Round Block with Holes For Tubes
From $227.00 (Ex GST)
Simmerstat Hot Plates
From $580.90 (Ex GST)
Simple Heating Mantles, Controlled Heating for Round Bottom Flasks
From $311.50 (Ex GST)
Vernier Calipers For Laboratory and Educational Work
From $9.90 (Ex GST)
[porto_related_products_slider]
FEATURED PRODUCTS
BEST SELLING PRODUCTS
Polypropylene Filter Funnels, Gravity Filtration Range
From $1.50 (Ex GST)
Glass Petri Dishes with Lid, Autoclavable, Borosilicate Glass (BORO 3.3)
From $3.90 (Ex GST)
What Our Customers Say
⭐⭐⭐⭐⭐
We ordered a set of customised BORO 3.3 borosilicate glassware for our teaching labs, and LabChoice Australia exceeded every expectation. From the first consultation to final delivery, their team listened carefully, offered expert advice, and ensured every piece matched our specifications perfectly.
The clarity and precision of the glassware are exceptional, and the quick turnaround made setup effortless. It’s refreshing to work with an Australian supplier who genuinely understands laboratory needs and takes pride in quality craftsmanship. We’ll definitely be returning to LabChoice for future glassware requirements
⭐⭐⭐⭐⭐
Our lab required high-precision BORO 3.3 glassware for analytical testing, and LabChoice Australia delivered outstanding results. The ordering process was simple, communication was clear, and every beaker and flask arrived perfectly calibrated and ready for use.
The quality of the glass is exceptional — resistant to heat, easy to clean, and consistently accurate in measurement. It’s reassuring to know there’s an Australian supplier that combines scientific precision with genuine customer care. I’d recommend LabChoice to any research team looking for dependable labware
⭐⭐⭐⭐⭐
We needed a set of customised borosilicate glassware for a specialised project, and LabChoice Australia delivered exactly what we envisioned. The team worked closely with us from design to production, ensuring every detail met our specifications. The craftsmanship is exceptional, and the turnaround time was impressive. It’s reassuring to know we can rely on them for unique, made-to-order pieces
⭐⭐⭐⭐⭐
LabChoice Australia has completely changed the way we source our lab glassware. The quality is consistently top-notch, and every piece meets the precision we need for reliable results. Their team knows their stuff, answers our questions quickly, and always goes the extra mile to help — they’re more like partners than just a supplier.
⭐⭐⭐⭐⭐
We trust LabChoice Australia because they deliver every time. Their borosilicate glassware is durable, accurate, and perfect for the high-heat work we do. Everything arrives well-packed with clear specs, so there are never surprises. It’s reassuring to deal with a supplier who understands both compliance and the demands of a busy lab