Low-Speed Laboratory Centrifuge with 12-Place Rotor, up to 4,500 rpm
- Adjustable speed range from 300 to 4,500 rpm in 100 rpm increments
- Maximum relative centrifugal force of 2,490 × g supports routine low-speed sample separation
- Twelve-place rotor accommodates 1.5 to 5 mL, 7 mL and 10 mL compatible tubes
- LCD provides clear operating information with selectable speed and RCF settings
- Timed operation from 30 seconds to 99 minutes, with HOLD mode for continuous running
- Quick-spin function supports brief centrifugation using the press-and-hold pulse control
- Electric lid lock, overspeed detection and automatic internal diagnostics support controlled operation
- Description
Description
The Low-Speed Laboratory Centrifuge, also known as a benchtop clinical centrifuge, is designed for routine processing of samples contained in compatible 1.5 to 5 mL, 7 mL and 10 mL laboratory tubes. Its twelve-place rotor supports small-batch centrifugation in clinical, pathology, biochemical, teaching and general research laboratories.
The centrifuge provides an adjustable speed range from 300 to 4,500 rpm in 100 rpm increments and develops a maximum relative centrifugal force of 2,490 × g. Speed accuracy of ±20 rpm supports consistent operation, while the selectable RPM and RCF display allows the operating parameter to be matched to the laboratory method.
Run time can be programmed from 30 seconds to 99 minutes, with HOLD mode available for continuous operation. A press-and-hold pulse key activates the short-time run function for quick spins, including brief sample collection at the bottom of compatible tubes before further preparation or analysis.
The LCD and intuitive operating menu provide clear access to speed, RCF and time settings. Acceleration is specified at approximately 20 seconds, with braking in approximately 13 seconds for the supplied A12-10P rotor configuration. The manufacturer also specifies two adjustable braking levels for use only with the separate A6-50P rotor, not the supplied twelve-place rotor.
A maintenance-free brushless DC motor supports dependable routine use without motor-brush replacement. The high-strength plastic rotor is designed to provide balanced and stable operation, while the dual-protection housing adds structural containment during centrifugation. Gentle low-speed braking helps reduce disturbance of separated sample layers at the end of a cycle.
The electric lid lock prevents access to the rotor during operation and releases automatically after the run has finished. Safety functions include a door interlock, overspeed detection and automatic internal diagnostics. The manufacturer states that the centrifuge is CE marked, cTÜVus certified and has passed an explosion-proof test. A sound alert indicates completion of the operating cycle.
LabChoice Australia supplies this Low-Speed Laboratory Centrifuge for clinical diagnostic, pathology, biochemistry, medical teaching, university, research and general laboratory environments requiring controlled centrifugation of compatible small-volume tubes.
| Specification | Details |
|---|---|
| Product type | Low speed centrifuge |
| Speed range | 300 to 4,500 rpm |
| Speed increment | 100 rpm |
| Maximum RCF | 2,490 x g |
| Speed accuracy | ±20 rpm |
| Rotor type | A12-10P |
| Rotor capacity | 1.5 to 5 mL, 7 mL and 10 mL x 12 |
| Run time | 30 seconds to 99 minutes, HOLD continuous operation |
| Display | LCD |
| Motor type | Brushless DC motor |
| Power | Single-phase, 100 V to 240 V, 50/60 Hz, 3 A, 70 W |
| Dimensions | 354 x 304 x 215 mm |
| Weight | 6 kg |
| Acceleration/Braking time | 20 seconds up, 13 seconds down |
| Braking adjustment note | 2-step braking adjustment only for A6-50P rotor |
| Lid function | Electric lock with automatic release after running |
| Safety devices | Door interlock, overspeed detector and automatic internal diagnosis |
| Rotor material | High-strength plastic rotor |
| Housing | Dual protection housing |
| Certifications and testing | CE marked, cTÜVus and passed explosion-proof test |
| Advanced features | Speed/RCF switch, short-time run function and sound-alert function |
Slotted Brass Spare Weights, 50 g and 100 g Replacement Range
From $6.50 (Ex GST)
Vortex Mixer, up to 3000 rpm
From $542.00 (Ex GST)
Spring Balance Newton Meters, Plastic Aluminium, 1N to 50N, Colour Ranges
From $9.50 (Ex GST)
Hooke’s Law Apparatus Complete with Spring Scale and Stand
$43.90(Ex GST)
Bottle Top Dispenser Without Recirculation Valve
From $481.50 (Ex GST)
Similar Products
Block for Epp Tubes
From $255.00 (Ex GST)
Block for Falcon Tubes
From $255.00 (Ex GST)
Digital Laboratory Water bath, 7 L to 50 L with Heating Temperature Control
From $2,067.00 (Ex GST)
Digital Orbital Shaker
From $3,080.00 (Ex GST)
Humidity Measurement Instruments For Laboratory
From $12.50 (Ex GST)
Hybridisation Oven
$6,274.00(Ex GST)
Hybridisation Oven Carousel Suit
From $1,216.00 (Ex GST)
Hybridisation Oven Platform
From $1,366.00 (Ex GST)
Immersion Cooler
$5,749.00(Ex GST)
Medium Reciprocating Shaker
$3,640.00(Ex GST)
Orbital Shaking Incubator
From $6,639.00 (Ex GST)
Round Block with Holes For Tubes
From $227.00 (Ex GST)
Vortex Mixer, up to 3000 rpm
From $542.00 (Ex GST)
[porto_related_products_slider]
Recently Viewed Products
FEATURED PRODUCTS
BEST SELLING PRODUCTS
Polypropylene Filter Funnels, Gravity Filtration Range
From $1.50 (Ex GST)
Glass Petri Dishes with Lid, Autoclavable, Borosilicate Glass (BORO 3.3)
From $3.90 (Ex GST)
What Our Customers Say
⭐⭐⭐⭐⭐
We ordered a set of customised BORO 3.3 borosilicate glassware for our teaching labs, and LabChoice Australia exceeded every expectation. From the first consultation to final delivery, their team listened carefully, offered expert advice, and ensured every piece matched our specifications perfectly.
The clarity and precision of the glassware are exceptional, and the quick turnaround made setup effortless. It’s refreshing to work with an Australian supplier who genuinely understands laboratory needs and takes pride in quality craftsmanship. We’ll definitely be returning to LabChoice for future glassware requirements
⭐⭐⭐⭐⭐
Our lab required high-precision BORO 3.3 glassware for analytical testing, and LabChoice Australia delivered outstanding results. The ordering process was simple, communication was clear, and every beaker and flask arrived perfectly calibrated and ready for use.
The quality of the glass is exceptional — resistant to heat, easy to clean, and consistently accurate in measurement. It’s reassuring to know there’s an Australian supplier that combines scientific precision with genuine customer care. I’d recommend LabChoice to any research team looking for dependable labware
⭐⭐⭐⭐⭐
We needed a set of customised borosilicate glassware for a specialised project, and LabChoice Australia delivered exactly what we envisioned. The team worked closely with us from design to production, ensuring every detail met our specifications. The craftsmanship is exceptional, and the turnaround time was impressive. It’s reassuring to know we can rely on them for unique, made-to-order pieces
⭐⭐⭐⭐⭐
LabChoice Australia has completely changed the way we source our lab glassware. The quality is consistently top-notch, and every piece meets the precision we need for reliable results. Their team knows their stuff, answers our questions quickly, and always goes the extra mile to help — they’re more like partners than just a supplier.
⭐⭐⭐⭐⭐
We trust LabChoice Australia because they deliver every time. Their borosilicate glassware is durable, accurate, and perfect for the high-heat work we do. Everything arrives well-packed with clear specs, so there are never surprises. It’s reassuring to deal with a supplier who understands both compliance and the demands of a busy lab