2 mm Banana Plug Cables, 300 mm Laboratory Lead
- 300 mm long leads with 2 mm banana plug ends, suitable for compact electronics kits and low current circuit connections
- Both ends are moulded stackable 2 mm banana plugs, supports daisy chaining and multi connection setups on panels
- Colour options black, blue, green, red and yellow support polarity marking and circuit identification in student work
- Short 300 mm length helps keep wiring tidy on small boards and trainer panels, reduces slack and tangles
- Useful for laboratory or educational setups using 2 mm sockets, confirm 2 mm compatibility before use where mixed 4 mm systems are present
From $5.90 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
4 mm Banana Plug Cables, 300 mm Laboratory Lead
- 300 mm cables with 4 mm banana plugs each end, supports standard laboratory and teaching circuits using 4 mm connectors
- Moulded stackable banana ends enable plug-through connections, supports chaining leads without removing existing connections
- Colour options listed black, blue, green, red and yellow, supports polarity marking and clearer circuit identification in class practicals
- Standard 300 mm length supports tidy bench setups, consistent lead reach and reduced tangling for student use
- Compatible with common 4 mm banana socket equipment such as meters and power supplies, select colour coded leads to reduce wiring errors and speed circuit builds
From $6.70 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Air Table Pucks & Pivot Pin, Lab Accessory Pack
- Air table puck components and accessories for low friction motion and collision experiments, supports classroom mechanics demonstrations
- Complete puck options include large puck with weights, small puck with weights, or small puck with magnet as listed
- Non-elastic collision setup supported by hook and claw Velcro band pairs for large or small pucks
- Joining hardware includes strip with end holes for puck pins and centre hole for pivot pin, pivot pin itself not included
- Additional parts include centre pivot pin that screws into table, lattice joining springs, circular magnet for small pucks, and brass weight sets for large or small pucks
From $5.60 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Air Table, Dynamics and Kinematics Model
- Air table replacement and operating parts for low friction dynamics and collision experiments using an air cushion
- Bronze bumper wires supplied for long side or short side, supports controlled boundary contact during puck motion studies
- Bronze spring listed to hold bumper wires, supports secure fitment and repeatable collision behaviour at table edges
- Hollow centre pin listed for cord use at table centre, supports cord based motion or constraint experiments where required
- Complete operating kit option supplied without table and adjustment feet, supports refurbishment or replacement of missing kit components
From $3.60 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Air Track Attachment Screws, Laboratory Track Accessory Type
- Air track attachment hardware for clamping accessories to track or glider systems, supports repeatable experiment assembly
- Two screw styles listed, grooved stem for tying cords and flat top for general attachment clamping
- Square nuts are designed to fit both screw types, supports compatibility across grooved and flat top attachment systems
- Square nut material options listed aluminium or glass filled nylon, allows matching to existing kit hardware and preferences
- Replacement screws and nuts support maintenance of air track accessory mounting, confirm correct thread and fitment for the specific air track model before use
From $1.70 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Air Track End Plug for Track Tube
- End plug for later-model air track tube, seals non-active end air leaks.
- Supports stable airflow when using a single inlet by blocking unused end escape.
- Designed to fit later-model tube ends, simple to install during setup changes.
- Helps keep air directed to the working section of track for reliable glider lift.
- Spare plug for maintenance, replaces missing end seal on later-model air tubes.
$4.40 (Ex GST)
Air Track Foot, Laboratory Track Support Unit
- Replacement foot components for later model air track systems, supports stable setup and accurate alignment during mechanics experiments
- Moulded plastic foot used vertically or horizontally on air track or sub base, plus shortened version for spark and paper track support
- Attachment hardware includes screw and aluminium square nut for fixing plastic feet securely to the track or sub base
- Metal brace reinforces double lateral support feet, supports rigidity and reduced movement during student handling
- Blue plastic adjuster knob with metal thread sets height and lateral position, locking nut secures the setting for repeatable level adjustment
From $1.60 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Air Track Glider Attachments, Inelastic Collision Accessory Set
- Air track glider accessories for specialised motion experiments, provides attachment options beyond standard glider runs
- Pendulum attachment listed for pendulum style investigations on the air track platform
- Vertical projectile attachment listed for vertical motion experiments using an air track glider setup
- Jet propulsion attachment specified as balloon air jet driven, supports action reaction demonstrations
- Constant force and soft collision attachments listed for controlled force input and collision behaviour trials
From $62.70 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Air Track Glider Weights, Collision Experiment Mass Set
- Brass weights and parts for air track gliders, supports controlled mass changes for acceleration, momentum and collision studies
- Slotted weight set fits glider weight blocks, set listed 4 x 50 g, 4 x 20 g and 4 x 10 g for flexible loading steps
- Old style brass block weights clamp inside glider spine, listed in 100 g and 50 g options for legacy glider formats
- Old style 200 mm compensating weight and screw listed as removable part, noted as permanent in later model gliders
- Supports repeatable experiment setups by matching mass additions to glider style, confirm glider type before selecting weight format
From $9.40 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Air Track Gliders, Low Friction Motion Type
- Air track gliders for low friction mechanics experiments, supports motion, collision and momentum demonstrations on air tracks
- Two standard lengths listed, 200 mm or 100 mm, suitable for different experiment setups and track space requirements
- Weight options match length as stated, 200 mm gliders weigh 200 g, 100 mm gliders weigh 100 g
- Each glider includes weight carrier blocks, supports adding mass for controlled acceleration and momentum comparisons
- Colour options listed black or gold in both lengths, supports identification of gliders during paired collision and timing experiments
From $26.40 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Air Track Manual, Laboratory Demonstration Guide
- Air track documentation and launcher accessory items, supports correct setup and safe use of air track systems
- Assembly and operation manuals are listed in two versions, one for 2.5 m tracks and one for 2.0 m tracks
- Manuals support consistent installation, alignment and experiment preparation, matching the specific track length supplied
- Manual trip launcher listed as simple manual type, intended as an air track launching accessory, details not provided in supplied text
- Useful for maintenance and staff handover, select the correct manual length version to match the installed track and accessories
From $5.60 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Air Track Non-Elastic Velcro Buffer Set (Pair)x
-
Velcro collision buffers for air track gliders, creates inelastic stick-together impacts with minimal rebound.
-
End-mounted pair for glider ends, supports repeatable non-elastic collision trials during mechanics lessons.
-
Compatible with old and new style IEC air track gliders, easy replacement accessory.
- Use on both gliders for best effect, clean Velcro faces for consistent repeatable results
-
Velcro surfaces engage on contact, reduces bounce, supports momentum and energy loss demonstrations.
$9.90 (Ex GST)
Air Track Over-Track Photogate with Leg Supports
- "Standard IEC photogate supplied with spring extension legs for direct over-track mounting.
- Legs slide into side receptacles, tight fit over air track tube for repeatable glider timing.
- Designed to sit directly on air track tube, consistent alignment without separate stands or clamps.
- Fits newer series air track tube only, specified compatibility for updated track hardware.
- Cables and plugs not supplied, gate body and mounting legs only for existing timer systems."
$136.80 (Ex GST)
Air Track Parts & Accessories, Laboratory Spares
- Air track replacement and accessory parts, supports maintenance of air track motion, timing and spark recording setups
- Triangular plastic air inlet end cap listed for new model tubes only, accepts current model air blower hose, not for older tubes
- Sub base adjustment stud with square head and blue nut joins track to sub base, used to adjust straightness of air tube
- Fibreglass tape measure listed 3 m long and 16 mm wide, fits air tube edge slot and can be cut to required length
- Glider accessories include spark pen left right pair, Alnico magnet 50 g for glider spine, and stainless buffer spring with screw fitting old and newer gliders
From $5.00 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Air Track Plastic Inclination Block Set (4 Pieces)
- Set of four moulded plastic air track inclination blocks for controlled, repeatable track tilt adjustment.
- Block heights 3 mm, 6 mm, 12 mm, 20 mm, stepped options for different incline settings.
- Raise one end of track to set slope, supports consistent acceleration and motion comparison runs.
- Useful for glider incline experiments, repeatable geometry between classes, reduces setup variation.
- Simple durable accessories for air tracks, quick to swap height blocks during teaching practicals.
$7.00 (Ex GST)
Air Track Replacement Velcro Strip Pair, 20 × 75 mm
- Hook and claw Velcro strips for air track gliders, designed for non-elastic collision demonstrations.
- 2 pair supply, supports fitting to multiple gliders or keeping spares for repeated class use.
- Hook-to-claw engagement on impact, reduces rebound compared with elastic bumpers in collision trials.
- Used for inelastic collision activities, supports momentum discussion and qualitative energy loss observations.
- Simple retrofit accessory, attach strips to glider ends, consistent contact behaviour across practical runs.
$3.70 (Ex GST)
Air Track Spark Paper, Motion Recording Roll
- Spark recording paper rolls for air track experiments, supports dot timing records used to calculate velocity from spacing
- White paper roll listed 20 mm wide x 180 m long, placed over black spark paper to receive erupted dot marks underneath
- Black spark paper roll listed 20 mm wide x 10 m long, placed under white paper to enable dot formation during sparking
- Spark passes through both papers to earth, black dot forms on underside of white paper, creating measurable dot patterns
- Black spark paper described as usable for many runs, supports repeat experiments before replacement is needed
From $14.80 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Air Track Spark Track Parts, Educational Mechanics Spare Set
- Spark track replacement parts for later model air tracks, supports maintenance of spark recording paper and EHV strip setups
- Earth cable kit connects paper track back to air track tube, supplied with banana plug plus flat top screw and nut hardware
- Paper guides are long plastic guides with metal strip, supplied for side mounting on 2.0 m or 2.5 m tracks as listed
- EHV strip guides are long plastic guides with metal strips, supplied for side mounting on 2.0 m or 2.5 m tracks as listed
- Select the correct guide length to match track length, intended for laboratory or educational use with compatible spark track assemblies
From $10.70 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Air Track Springs, Laboratory Motion Accessory Type
- Air track springs and adapters for glider experiments, supports joining gliders and SHM demonstrations on low friction tracks
- Flat loop springs in stainless steel listed 30 cm or 15 cm diameter, 12 mm wide, designed to join two gliders together
- Flat loop spring holder clamps into glider end and includes screw and nut, supports secure attachment of loop springs
- Coil spring options include 300 mm length for SHM motion experiments and 60 mm length for joining gliders into an SHM system
- Air inlet bush fits old style end moulding and reduces hole size to suit smaller hose used on later adjustable speed air blower
From $3.90 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Air Track Stop Block, Laboratory Track Stop
- Air track stop block parts for controlled stopping and impact demonstrations, includes carrier, block and attachment hardware
- Felt lined carrier support glider holds the heavy cast iron stop block, supports stable mounting and handling during experiments
- Cast iron stop block weight supplied as the block only, designed to fix to the felt lined support using screw and nut
- Attachment screw and nut supplied as hardware only, joins stop block to carrier support for secure assembly
- Replacement components support maintenance of booster kit stop block setups, confirm compatibility with existing air track and support glider fittings before use
From $2.20 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Alligator Clips, Laboratory Electrical Testing Type
- Alligator clips for electrical connections in laboratory and teaching circuits, suitable for quick temporary gripping points
- 4 mm shank accepts standard banana plugs, supports compatibility with common school leads and test equipment
- Pack size stated as 10 clips, supports class sets and bench spares for repeated practical work
- Options include plain non-insulated shank with screw for direct metal contact, plus insulated shank versions for safer handling
- Colour options listed red or black insulation for polarity identification, supports clearer wiring layouts in student experiments
From $12.70 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Banana Plugs, 4mm Laboratory Type
- 4 mm banana sockets for building connection points in educational circuits, lab panels and experiment boards
- Pack quantity stated as 10 sockets per option, supports class sets, repairs and bench spares for frequent practical use
- Colour options black, blue, green, red and yellow support polarity marking and clear circuit identification
- Compatible with standard 4 mm banana plugs commonly used on meters, power supplies and teaching equipment
- Suitable for laboratory or educational environments where repeated plug in connections are required, select colour coding to match wiring conventions and reduce setup errors
From $11.30 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Banana Plugs, 4mm Laboratory Type
- Banana plug accessories for laboratory and teaching circuits, supports reliable connections between meters, power supplies and experiment boards
- 2 mm plug to 4 mm socket adaptor bridges different connector standards, supports compatibility between compact 2 mm kits and 4 mm systems
- 4 mm banana plugs are stackable for daisy chaining circuits, described for excellent contact and long lasting use
- Three way wire termination options listed, screw to wire, solder to wire, or through hole and wrap for secure cable attachment
- Colour options black, blue, green, red and yellow support polarity and circuit identification in student practical work
From $4.40 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Boyle’s Law Apparatus, Lab Demonstration Unit
- Spares and parts for Boyle’s law apparatus, supports syringe demonstrations and high pressure pressure-volume experiments
- Syringe only component uses commercial plastic syringe, weight loaded compression, plunger markings indicate volume changes
- High pressure glass tubes listed heavy walled, open both ends 12 x 649 mm with 2.2 mm wall and flamed ends, closed end 12 x 650 mm
- Consumables and hardware include coloured fluid bottle for one loading, metal O-ring set of 8 for pot seals
- System components include complete high pressure pressure pot and spare plastic high pressure air pump, hand pumpable
From $3.10 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Boyle’s Law Glass Tubes, Laboratory Demonstration Tube Set
- Spare glass tubes for classic 1 m high Boyle’s law apparatus, replacement parts for low pressure demonstrations
- Closed end tube option, approx 200 mm length, suits sealed volume end of the classic pattern setup
- Open end tube option, approx 200 mm length, suits open volume end for pressure volume investigation
- Used to restore tube pair operation, supports classroom experiments without replacing full apparatus
- For laboratory or educational settings only, handle glass carefully, inspect for cracks and use under supervision
From $17.30 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Brass Water Filter Pump with Non-Return Valve
- Nickel plated brass filter pump for mains water supply, provides vacuum down to -80 kPa
- Side outlet connects to filtrate flask, draws material being filtered into the flask faster
- Nickel plated brass filter pump includes non-return valve, for water-driven vacuum filtration setups in labs
- Can also serve general vacuum requirements, limited to the specified vacuum level of -80 kPa
- Choose hose fitting or 3/4" BSP screw connection for 1/2" taps on water supply
From $49.00 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Cast Iron Bar Breaker Rods, Pack of 10
- Pack of 10 cast iron rods, replacement break rods for bar breaker demonstration.
- Each rod inserts through bar breaker hole, acts as the sacrificial fracture element.
- Heated bar expansion loads rod until it breaks, giving a loud audible report.
- Supports repeated classes, easy reset by replacing rod, keeps apparatus ready.
- Supervised use recommended, keep clear during heating and break, expect sudden noise.
$12.70 (Ex GST)
Deflagrating Spoon with Aluminium Cap and Cup Options
- Classical pattern deflagrating spoon with rod and deep drawn, smoothly rounded cup fitted at the end
- Aluminium cap covers the mouth of the gas jar, with the rod passing through the cap
- Cork stopper fitted in the cap supports the rod, helping maintain stable positioning during use
- Cup is deep drawn and smoothly rounded, offered in brass or iron to match the required material
- Both variations use the same aluminium cap and cork support, only the cup material changes
From $11.00 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
Deflagrating Spoon, 300 mm Long Handle for Gas Vessel Demonstrations
• 300 mm deflagrating spoon, long handle for lowering samples into gas-filled glass vessels safely.
• Steel cup holds sample securely, supports controlled deflagration demonstrations in a contained setup.
• Cover included, helps manage sample during transfer and positioning inside the vessel.
• Designed for gas vessel demonstrations, provides reach and separation from reaction zone for operator.
• Laboratory or educational use under supervision, follow combustion safety practices and protective equipment.
$8.80 (Ex GST)
Nylon Air Track End-of-Track Pulley Attachment
- Air track end pulley on mounting strip, provides fixed pulley point for cord-based air track experiments.
- Flat-top attachment screw included, secures strip to end fitting of air tube for stable mounting.
- Designed for end-of-track installation, supports consistent alignment and smooth cord routing.
- Simple replacement accessory for air track setups, restores pulley function at track end.
- Mounting strip format keeps pulley positioned correctly on tube end fitting during repeated runs.
$16.60 (Ex GST)
Pack of 4 Blue D-Cell Battery Holders for Series or Parallel Connections
- Pack of 4 blue D-cell holders, supports series or parallel wiring for flexible DC supply setups.
- Series connection option increases voltage output, suitable for higher voltage requirements in circuits.
- Parallel connection option increases capacity, supports longer operation and higher current availability.
- Useful for teaching electrical concepts, comparing voltage versus capacity effects in simple experiments.
- D-cell format for practical classroom power, compatible with common lab and education circuit builds.
$11.10 (Ex GST)
Replacement Hose Assembly for Air Source (Spare),2m
- Spare hose assembly, hose plus end fittings only, replacement line for IEC air blower systems.
- Designed for IEC air blower used on air tracks and air tables, restores flexible air connection.
- Fits newer series air track tube only as specified, correct interface for updated track fittings.
- Older tube can be adapted using reducing bush, reduces hole size to accept new blower hose.
- Accessory part only, blower not included, suitable for maintenance and replacement in teaching labs.
$34.10 (Ex GST)
Steel Balls, Precision Laboratory Grade
- Steel balls supplied as single size sets of 60, diameter options 12.7 mm, 16 mm, 19 mm
- Supports collision investigations, elastic and inelastic interactions, rebound behaviour, and momentum transfer comparisons
- Useful for Newton’s laws demonstrations, acceleration response, force direction changes, and motion analysis activities
- Three sizes allow controlled comparisons of outcomes when diameter changes, while keeping ball count constant
- Suitable for repeat classroom runs, set quantities support group work, sorting, storage, and consistent experiment preparation
From $40.70 (Ex GST)
This product has multiple variants. The options may be chosen on the product page
didn't see what you are looking for ?
We’ll source it or make it for you. LabChoice supports your research every step.
Parts and Accessories are essential components that support the proper functioning, maintenance, and adaptability of laboratory equipment and experimental setups. In chemistry, physics, and educational laboratories, these supporting items help ensure that instruments operate correctly, glassware connections remain secure, and experiments can be performed safely and efficiently. Having the right laboratory accessories available improves workflow, reduces equipment downtime, and allows laboratories to configure or repair apparatus when needed.
This category typically includes a wide range of supporting laboratory items such as stoppers, adapters, connectors, clamps, support rods, joint clips, tubing connectors, replacement heads, spare glass components, sealing accessories, and other laboratory fittings. These parts allow users to modify or extend experimental assemblies, replace damaged components, or maintain existing laboratory equipment without replacing the entire apparatus. In many experimental setups, particularly distillation, filtration, and gas handling systems, properly fitted accessories are critical for maintaining airtight connections and stable operation.
Where glass components are involved, borosilicate glass such as BORO 3.3 is widely used because of its strong resistance to thermal shock and chemical exposure. Relevant material standards may include ISO 3585, which specifies the properties of borosilicate glass 3.3 used in laboratory glassware, and ASTM E438, which defines performance requirements for glass used in laboratory apparatus. For volumetric glass components used in accessories or assemblies, ASTM E694 may also apply.
For laboratories using electrically powered equipment with interchangeable parts or accessories, the international safety standard for electrical equipment used in measurement, control, and laboratory environments. Manufacturing and supply processes for laboratory equipment are also commonly aligned with ISO 9001 quality management systems to support consistent product reliability and quality.
At LabChoice Australia, we supply dependable laboratory parts and accessories designed to support chemistry, physics, and general laboratory workflows. Our range helps laboratories maintain equipment, replace essential components, and configure experimental setups with confidence, ensuring reliable operation across education, research, and industrial laboratory environments.