Air Track Parts & Accessories, Laboratory Spares
From $5.00 (Ex GST)
- Air track replacement and accessory parts, supports maintenance of air track motion, timing and spark recording setups
- Triangular plastic air inlet end cap listed for new model tubes only, accepts current model air blower hose, not for older tubes
- Sub base adjustment stud with square head and blue nut joins track to sub base, used to adjust straightness of air tube
- Fibreglass tape measure listed 3 m long and 16 mm wide, fits air tube edge slot and can be cut to required length
- Glider accessories include spark pen left right pair, Alnico magnet 50 g for glider spine, and stainless buffer spring with screw fitting old and newer gliders
- Description
Description
Air track replacement and accessory parts for later model and mixed model systems, including a triangular plastic air inlet end cap for new model tubes, sub base adjustment stud hardware for straightness control, fibreglass tape measure for fitting the air tube slot, spark pens for gliders supplied as left and right pair, an Alnico glider magnet with stated mass, and a stainless steel buffer spring and mount for track and glider ends that fits old and newer gliders.
Triangular Plastic Air Inlet End Cap, New Model Tube Only
Moulded triangular shaped end cap for later model air track tube. Accepts the air hose from the current model air blower. Stated as not fitting the older model air track tube.
Sub Base Adjustment Stud with Square Head and Blue Knob, For Straightness Setting
Metal stud with square plastic head and blue adjusting nut for joining underside of later model air track to the upper side of the sub base. Used to adjust the straightness of the air tube.
Fibreglass Tape Measure 3 m, 16 mm Wide, Fits Air Tube Slot
Air track tape measure, 3 m long fibreglass tape, 16 mm width, designed to fit the slot in the edge of the air tube. Supplied to be cut to length required.
Spark Pens for Glider, Left and Right Pair, New Wire Style
Air track spark pen for glider, fits any glider, new wire style. Supplied as a left and right hand pair.
Glider Magnet Alnico 50 g, Fits Glider Spine
Air track magnet for glider, Alnico, designed to fit the glider spine. Mass stated 50 g.
Buffer Spring Stainless Steel with Screw, For Track and Glider Ends
Air track buffer spring and mount for glider, stainless steel, supplied with screw. Fits to end of tracks and ends of gliders. Stated to fit both old and newer models of air track gliders.
Similar Products
Air Table Pucks & Pivot Pin, Lab Accessory Pack
From $5.60 (Ex GST)
PTFE Pivot Stir Bars, For Curved Base Vessels, B10 to B40 Sizes
From $3.00 (Ex GST)
Bunsen burner and Accessories
From $6.00 (Ex GST)
Siren Disc, Lab Sound Apparatus
From $7.50 (Ex GST)
PSSC Helical Steel Spring Kit
$70.00(Ex GST)
Polypropylene Volumetric Flasks, Screw Cap Measuring Flask Range
From $4.50 (Ex GST)
Laboratory Tube and Cylinder Racks, Polypropylene Storage Type
From $11.00 (Ex GST)
Scintillation Vial (Sample Vial), BORO 5.0
From $416.50 (Ex GST)
Air Table, Dynamics and Kinematics Model
From $3.60 (Ex GST)
Air Track End Plug for Track Tube
$4.40(Ex GST)
Air Track Glider Weights, Collision Experiment Mass Set
From $9.40 (Ex GST)
Air Track Gliders, Low Friction Motion Type
From $26.40 (Ex GST)
Air Track Non-Elastic Velcro Buffer Set (Pair)x
$9.90(Ex GST)
Air Track Over-Track Photogate with Leg Supports
$136.80(Ex GST)
Air Track Plastic Inclination Block Set (4 Pieces)
$7.00(Ex GST)
Air Track Spark Track Parts, Educational Mechanics Spare Set
From $10.70 (Ex GST)
Air Track Springs, Laboratory Motion Accessory Type
From $3.90 (Ex GST)
Alligator Clips, Laboratory Electrical Testing Type
From $12.70 (Ex GST)
Banana Plugs, 4mm Laboratory Type
From $4.40 (Ex GST)
Boyle’s Law Glass Tubes, Laboratory Demonstration Tube Set
From $17.30 (Ex GST)
Nylon Air Track End-of-Track Pulley Attachment
$16.60(Ex GST)
Replacement Hose Assembly for Air Source (Spare),2m
$34.10(Ex GST)
[porto_related_products_slider]
FEATURED PRODUCTS
BEST SELLING PRODUCTS
Polypropylene Filter Funnels, Gravity Filtration Range
From $1.00 (Ex GST)
Glass Petri Dishes with Lid, Autoclavable, Borosilicate Glass (BORO 3.3)
From $3.90 (Ex GST)
LATEST PRODUCTS
Adam Polaris PTB/PBB Toploading Precision Balances for Lab Weighing
From $1,615.00 (Ex GST)
Adam Polaris Precision Balances for Accurate Lab Weighing
From $2,050.00 (Ex GST)
Adam PMB Moisture Analyser for Laboratory Moisture Testing
From $2,960.00 (Ex GST)
TOP RATED PRODUCTS
Adam Polaris PTB/PBB Toploading Precision Balances for Lab Weighing
From $1,615.00 (Ex GST)
Adam Polaris Precision Balances for Accurate Lab Weighing
From $2,050.00 (Ex GST)
Adam PMB Moisture Analyser for Laboratory Moisture Testing
From $2,960.00 (Ex GST)
What Our Customers Say
⭐⭐⭐⭐⭐
We ordered a set of customised BORO 3.3 borosilicate glassware for our teaching labs, and LabChoice Australia exceeded every expectation. From the first consultation to final delivery, their team listened carefully, offered expert advice, and ensured every piece matched our specifications perfectly.
The clarity and precision of the glassware are exceptional, and the quick turnaround made setup effortless. It’s refreshing to work with an Australian supplier who genuinely understands laboratory needs and takes pride in quality craftsmanship. We’ll definitely be returning to LabChoice for future glassware requirements
⭐⭐⭐⭐⭐
Our lab required high-precision BORO 3.3 glassware for analytical testing, and LabChoice Australia delivered outstanding results. The ordering process was simple, communication was clear, and every beaker and flask arrived perfectly calibrated and ready for use.
The quality of the glass is exceptional — resistant to heat, easy to clean, and consistently accurate in measurement. It’s reassuring to know there’s an Australian supplier that combines scientific precision with genuine customer care. I’d recommend LabChoice to any research team looking for dependable labware
⭐⭐⭐⭐⭐
We needed a set of customised borosilicate glassware for a specialised project, and LabChoice Australia delivered exactly what we envisioned. The team worked closely with us from design to production, ensuring every detail met our specifications. The craftsmanship is exceptional, and the turnaround time was impressive. It’s reassuring to know we can rely on them for unique, made-to-order pieces
⭐⭐⭐⭐⭐
LabChoice Australia has completely changed the way we source our lab glassware. The quality is consistently top-notch, and every piece meets the precision we need for reliable results. Their team knows their stuff, answers our questions quickly, and always goes the extra mile to help — they’re more like partners than just a supplier.
⭐⭐⭐⭐⭐
We trust LabChoice Australia because they deliver every time. Their borosilicate glassware is durable, accurate, and perfect for the high-heat work we do. Everything arrives well-packed with clear specs, so there are never surprises. It’s reassuring to deal with a supplier who understands both compliance and the demands of a busy lab