E
x
p
l
o
r
e
M
o
r
e
:
Parts & Accessories
Air Table, Dynamics and Kinematics Model
From $4.50 (Ex GST)
From $4.50 (Ex GST)
- Air table parts for low friction dynamics and collision experiments
- Supports classroom demonstrations using an air cushion to reduce friction
- Bronze bumper wires are available for long side and short side setups
- Bronze spring holds bumper wires in place during suitable table use
- Hollow centre pin is listed for cord-based air table applications
- Complete operating kit is supplied without table and adjustment feet
- Suitable for supervised physics laboratory and educational use
[request_quote_button]
- Description
Description
The Air Table Parts, also known as air table dynamics and kinematics accessories, are designed for maintaining and supporting compatible air table systems used in motion, collision and low friction mechanics experiments. They are suitable for school physics laboratories, university teaching laboratories and supervised educational mechanics demonstrations. Air tables use compressed air to create a thin air layer that helps reduce frictional forces during puck or object motion. This allows students to observe motion, collisions and kinematic behaviour in a more controlled classroom setting.
Bronze bumper wire options are available for the long side and short side of the air table setup. These parts support controlled boundary contact during compatible collision and motion experiments. A bronze spring is listed for holding the bumper wires in place. This helps support secure fitment of the bumper arrangement and repeatable table-edge behaviour during practical demonstrations. A hollow centre pin is also listed for cord use at the centre of the table. No further specifications were supplied, so users should confirm compatibility with the existing air table setup and intended cord-based experiment before selection.
The complete air table operating kit is supplied as an operating kit only. The table and adjustment feet are not included, making this option suitable for refurbishment, replacement or completion of existing compatible air table systems. Users should select parts according to the specific air table configuration, side length, existing hardware and experiment requirements. Air table experiments should be performed under appropriate supervision using compatible pucks, air supply, cords and safe classroom procedures.
LabChoice Australia supplies Air Table Parts for school physics departments, university teaching laboratories and educational dynamics workspaces. They are suitable for supervised experiments covering low friction motion, collisions, velocity, acceleration, cord-based constraints and introductory kinematics using compatible air table systems.
Educational rock specimens - Pack of 10 Pcs
From $24.90 (Ex GST)
Test Tube Rack & Drain, Open Rack Design
From $25.90 (Ex GST)
Scintillation Vial with White PP Cap, BORO 3.3 Glass
From $200.00 (Ex GST)
Save 25%
Magnetic Stirrer, up to 1500 rpm
From $459.00 (Ex GST)
Oil and Water Separator Receiver Apparatus BORO 3.3 Glass
From $44.90 (Ex GST)
Flat Block for Vials
$254.00(Ex GST)
You May Also Need
2 mm Banana Plug Cable, 300 mm, Moulded Stackable
From $7.50 (Ex GST)
Air Track End Plug for Track Tube
$5.50(Ex GST)
Air Track Foot, Laboratory Track Support Unit
From $1.90 (Ex GST)
Air Track Installation & User Manual
From $6.90 (Ex GST)
Air Track Plastic Inclination Block Set (4 Pieces)
$8.90(Ex GST)
Air Track Replacement Parts and Accessories
From $6.50 (Ex GST)
Air Track Spark Paper, Motion Recording Roll Black and White
From $18.50 (Ex GST)
Air Track Stop Block for Track Systems
From $2.90 (Ex GST)
Boyle’s Law Apparatus Parts and Spares
From $13.50 (Ex GST)
Boyle’s Law Syringe Only, Commercial Plastic Syringe
$3.90(Ex GST)
Brass Filter Pump with Non-Return Valve
From $77.50 (Ex GST)
Cast Iron Bar Breaker Rods, Pack of 10
$15.90(Ex GST)
Replacement Hose Assembly for Air Source (Spare),2m
$42.50(Ex GST)
Support Rack for Radiation Source and Absorber Alignment
$46.90(Ex GST)
[porto_related_products_slider]
Recently Viewed Products
SELECT OPTIONS
Adam CBX Compact Balances, Rechargeable Type
From $175.00 (Ex GST)
FEATURED PRODUCTS
BEST SELLING PRODUCTS
Glass Petri Dishes with Lid, Autoclavable, Borosilicate Glass (BORO 3.3)
From $3.90 (Ex GST)
Polypropylene Filter Funnels, 50 mm to 150 mm Range
From $1.50 (Ex GST)
LATEST PRODUCTS
Pointed Scalpel with Plain Handle, 35 mm
$4.90(Ex GST)
Stainless Steel Scalpel Handles for Dissection
From $4.50 (Ex GST)
IEC Simmerstat Magnetic Stirrer Hot Plate with PTFE Coated
TOP RATED PRODUCTS
Pointed Scalpel with Plain Handle, 35 mm
$4.90(Ex GST)
Stainless Steel Scalpel Handles for Dissection
From $4.50 (Ex GST)
IEC Simmerstat Magnetic Stirrer Hot Plate with PTFE Coated
What Our Customers Say
⭐⭐⭐⭐⭐
We ordered a set of customised BORO 3.3 borosilicate glassware for our teaching labs, and LabChoice Australia exceeded every expectation. From the first consultation to final delivery, their team listened carefully, offered expert advice, and ensured every piece matched our specifications perfectly.
The clarity and precision of the glassware are exceptional, and the quick turnaround made setup effortless. It’s refreshing to work with an Australian supplier who genuinely understands laboratory needs and takes pride in quality craftsmanship. We’ll definitely be returning to LabChoice for future glassware requirements
⭐⭐⭐⭐⭐
Our lab required high-precision BORO 3.3 glassware for analytical testing, and LabChoice Australia delivered outstanding results. The ordering process was simple, communication was clear, and every beaker and flask arrived perfectly calibrated and ready for use.
The quality of the glass is exceptional — resistant to heat, easy to clean, and consistently accurate in measurement. It’s reassuring to know there’s an Australian supplier that combines scientific precision with genuine customer care. I’d recommend LabChoice to any research team looking for dependable labware
⭐⭐⭐⭐⭐
We needed a set of customised borosilicate glassware for a specialised project, and LabChoice Australia delivered exactly what we envisioned. The team worked closely with us from design to production, ensuring every detail met our specifications. The craftsmanship is exceptional, and the turnaround time was impressive. It’s reassuring to know we can rely on them for unique, made-to-order pieces
⭐⭐⭐⭐⭐
LabChoice Australia has completely changed the way we source our lab glassware. The quality is consistently top-notch, and every piece meets the precision we need for reliable results. Their team knows their stuff, answers our questions quickly, and always goes the extra mile to help — they’re more like partners than just a supplier.
⭐⭐⭐⭐⭐
We trust LabChoice Australia because they deliver every time. Their borosilicate glassware is durable, accurate, and perfect for the high-heat work we do. Everything arrives well-packed with clear specs, so there are never surprises. It’s reassuring to deal with a supplier who understands both compliance and the demands of a busy lab