ASEP Powder-Coated Stream Tray
AUD 266.50(Ex GST)
AUD 266.50(Ex GST)
- Stream tray for erosion and river formation demonstrations
- IEC stream tray as listed
- Strong steel tray construction
- Powder coated against corrosion as listed
- Size listed as 825 × 370 × 100 mm
- Designed for use with sand and other compatible materials
- Water can be introduced to study erosion effects
- Useful for simulating soil, streams and river formation
- Suitable for earth science and environmental science teaching
- Practical apparatus for school and university laboratories
- Confirm drainage, bench support and cleanup method before use
- Use under appropriate laboratory or educational supervision
[request_quote_button]
- Description
- Datasheets & Manuals
Description
The Powder Coated Stream Tray, also known as a stream formation tray or erosion demonstration tray, is designed for studying the effects of flowing water on sand, soil-like materials and compatible sediment mixtures. The IEC stream tray is made from strong steel and is powder coated against corrosion, supporting repeated classroom use when cleaned and dried correctly after experiments. Sand and other suitable materials can be spread inside the tray to simulate soil, landscape surfaces or sediment beds. Water is then introduced to observe erosion, sediment movement, channel formation, stream paths and river development.
This apparatus is useful for earth science, geography, environmental science and general science teaching, helping students visualise how flowing water shapes landforms over time. The listed tray size is 825 × 370 × 100 mm, providing a practical demonstration area for controlled classroom experiments while remaining suitable for bench-top or preparation-room handling. Users should confirm the required sand type, water volume, slope setup, drainage method, bench support, cleanup procedure and storage requirements before use. Use the tray on a stable surface and avoid overfilling. Water and wet sand can make the tray heavy, and spills may create slip hazards during classroom demonstrations.
After use, remove sediment, rinse and dry the tray according to the approved laboratory procedure to help protect the coating and reduce corrosion risk. This product is intended for laboratory or educational settings only and should be used under appropriate supervision. This item is supplied as the powder coated stream tray only. Sand, soil, water supply, drainage tubing, stands, supports, collection trays, measuring tools, worksheets and additional earth science accessories are not included unless specified separately.
LabChoice Australia supplies Stream Trays and earth science teaching equipment for school science laboratories, university teaching laboratories and educational facilities requiring practical tools for erosion, sediment transport and stream formation demonstrations.
Prepared Botany Microscope Slide Set, 25 Slides
AUD 118.50(Ex GST)
Deflagrating Spoon, 300 mm, Stainless Steel Cup with Cover
AUD 10.90(Ex GST)
Thermometer Anti-Roll Rings, Blue Rubber, Pack of 100
AUD 44.90(Ex GST)
Wall Mount Drying Rack, 39 Points, 790 × 580 mm
AUD 136.90(Ex GST)
Air Track Flat Loop Spring Holder with Screw and Nut
AUD 7.50(Ex GST)
Glass Coplin Staining Jar with Screw Cap
AUD 24.90(Ex GST)
Orbital Decolorizing Shaker with Fixed Plate, 40-200 rpm
AUD 286.50(Ex GST)
ORP Probe Replacement for GroStar® GS5-E, Double-Junction Platinum Sensor
AUD 130.00(Ex GST)
Boyle’s Law Glass Tubes, Laboratory Demonstration Tube Set
From AUD 21.90 (Ex GST)
You May Also Need
Air Track Air Tubes, 2 m and 2.5 m, with End Seals
From AUD 362.50 (Ex GST)
Air Track Photogate Kit, 2 Gates and Cables, Without Timer
AUD 458.90(Ex GST)
Aluminium Pulleys, 50 mm Diameter, Single, Double and Triple
From AUD 9.90 (Ex GST)
Boyle’s Law Syringe Apparatus
AUD 68.50(Ex GST)
Dynamics Carts, Laboratory Collision and Motion Kit
From AUD 179.50 (Ex GST)
Free Fall Apparatus, Solenoid Release, 1 m and 1.5 m
From AUD 362.50 (Ex GST)
High Pressure Boyle’s Law Apparatus with Air Pump, Non-Mercury
AUD 387.90(Ex GST)
I-Gauge with BeeSpi V for Height, Speed and Impact Experiments
AUD 610.50(Ex GST)
Large Demonstration Manometer, ±300 mm Range
AUD 156.90(Ex GST)
Mini Projectile Launcher for Projectile Motion
AUD 136.90(Ex GST)
PSSC Helical Steel Spring Kit
AUD 87.50(Ex GST)
Recording Timers with Kit, 50 Dots/sec AC or 25/50 Hz Electronic DC, 8 to 12V Power
From AUD 107.50 (Ex GST)
Rolling Cylinders, Metal and Plastic Pair
AUD 159.50(Ex GST)
Tensile Testing Machine for Strength of Materials Experiments
AUD 389.50(Ex GST)
[porto_related_products_slider]
FEATURED PRODUCTS
BEST SELLING PRODUCTS
Petri Dishes, Polypropylene, Autoclavable & Reusable, High Quality
From AUD 1.20 (Ex GST)
Glass Petri Dishes with Lid, Autoclavable, Borosilicate Glass (BORO 3.3)
From AUD 3.90 (Ex GST)
Reagent Bottles, Wide Mouth, HDPE, Chemical-Resistant, Highly Reliable & Durable - Each
From AUD 1.50 (Ex GST)
LATEST PRODUCTS
TOP RATED PRODUCTS
What Our Customers Say
⭐⭐⭐⭐⭐
We ordered a set of customised BORO 3.3 borosilicate glassware for our teaching labs, and LabChoice Australia exceeded every expectation. From the first consultation to final delivery, their team listened carefully, offered expert advice, and ensured every piece matched our specifications perfectly.
The clarity and precision of the glassware are exceptional, and the quick turnaround made setup effortless. It’s refreshing to work with an Australian supplier who genuinely understands laboratory needs and takes pride in quality craftsmanship. We’ll definitely be returning to LabChoice for future glassware requirements
⭐⭐⭐⭐⭐
Our lab required high-precision BORO 3.3 glassware for analytical testing, and LabChoice Australia delivered outstanding results. The ordering process was simple, communication was clear, and every beaker and flask arrived perfectly calibrated and ready for use.
The quality of the glass is exceptional — resistant to heat, easy to clean, and consistently accurate in measurement. It’s reassuring to know there’s an Australian supplier that combines scientific precision with genuine customer care. I’d recommend LabChoice to any research team looking for dependable labware
⭐⭐⭐⭐⭐
We needed a set of customised borosilicate glassware for a specialised project, and LabChoice Australia delivered exactly what we envisioned. The team worked closely with us from design to production, ensuring every detail met our specifications. The craftsmanship is exceptional, and the turnaround time was impressive. It’s reassuring to know we can rely on them for unique, made-to-order pieces
⭐⭐⭐⭐⭐
LabChoice Australia has completely changed the way we source our lab glassware. The quality is consistently top-notch, and every piece meets the precision we need for reliable results. Their team knows their stuff, answers our questions quickly, and always goes the extra mile to help — they’re more like partners than just a supplier.
⭐⭐⭐⭐⭐
We trust LabChoice Australia because they deliver every time. Their borosilicate glassware is durable, accurate, and perfect for the high-heat work we do. Everything arrives well-packed with clear specs, so there are never surprises. It’s reassuring to deal with a supplier who understands both compliance and the demands of a busy lab