E
x
p
l
o
r
e
M
o
r
e
:
Electrochemistry Meters & Analysers
pH Meter Tester Kit for Viscous Liquid Samples with LabSen 855 ATC Electrode, -2.00 to 16.00 pH
AUD 520.00(Ex GST)
AUD 520.00(Ex GST)
- pH meter tester kit for viscous liquid and complex sample measurement workflows
- Supplied with LabSen 855 pre-pressurised ATC pH / temperature electrode
- Suitable for cosmetics, skincare products, paints, coatings, slurry, glues, honey and resin samples
- Pre-pressurised long-life reference system helps reduce junction clogging in viscous samples
- HA membrane supports reduced alkaline error in high salinity and complex liquid samples
- Complete kit includes User Manual, LabSen 855 pH Electrode, PH60 Meter Body, CalPod Solution Organizer, pH 4.00 Solution, pH 7.00 Solution, pH 10.01 Solution, 3M Soaking KCL Solution and Protective Cap
[request_quote_button]
- Description
- Datasheets & Manuals
Description
Handheld pH Meter Tester Kit for Viscous Liquid Samples with LabSen 855 ATC Electrode, also known as a portable pH tester kit for viscous samples, is designed for users who need practical pH measurement outside a fixed benchtop setup. This kit is suitable for laboratories, product development teams, quality-control users and field technicians working with samples that can be difficult to measure using a standard pH electrode. It supports applications where thicker sample texture can affect electrode contact, response time and routine cleaning.
The meter and electrode combination is useful where portability, organised calibration and application-specific electrode selection are important. It helps users manage pH testing across different sample types while keeping the main accessories together for routine work. The supplied organiser and carry case support easier storage, transport and calibration preparation. This makes the kit practical for users who need a ready-to-use portable pH testing setup for both laboratory and on-site measurement routines.
Included with this pH Tester Kit: User Manual, LabSen 855 pH Electrode, PH60 Meter Body, CalPod Solution Organizer, pH 4.00 Solution, pH 7.00 Solution, pH 10.01 Solution, 3M Soaking KCL Solution and Protective Cap.
Users should follow the correct rinsing, cleaning, soaking and storage procedures after measuring viscous or residue-forming samples. Sample preparation, electrode contact, calibration routine and maintenance requirements should be confirmed before regular use.
LabChoice Australia supplies pH Meter Tester Kits for water-quality professionals, schools, universities, research laboratories and testing facilities requiring portable pH measurement for viscous liquid, complex sample and general water solution applications.
Features
- Professional pH tester kit
- Includes LabSen 855 ATC pH electrode
- Pre-pressurised pH / temperature electrode format
- Suitable for highly viscous liquid samples
- Suitable for general water solution measurement
- Swiss sensor technology referenced in supplied product information
- Long-life reference system
- Designed to reduce junction clogging during viscous sample testing
- Quick response performance referenced in supplied product information
- HA membrane design
- Supports measurement in high salinity and complex liquid samples
- Water-resistant meter body
- Automatic calibration function
- Automatic temperature compensation
- Reading alarm settings
- Automatic reading lock function
- Includes ready-to-use pH 4.00 calibration buffer
- Includes ready-to-use pH 7.00 calibration buffer
- Includes ready-to-use pH 10.01 calibration buffer
- Includes soaking solution
- Includes Apera CalPod Solution Organiser
- Rugged carrying case included
- Sample viscosity, cleaning method, calibration sequence and electrode storage procedure should be confirmed before use
Warranty
The instrument is covered for defects in material and workmanship for two years, while the probe is covered for six months from delivery, subject to the manufacturer’s warranty terms.
The limited warranty does not cover issues caused by accidental damage, improper use, normal wear and tear, transport, storage, failure to follow product instructions, unauthorised maintenance, unauthorised modification, unauthorised repair, incompatible use with other products or materials, abuse, accidents or external causes beyond reasonable control.
| Specification | Details |
|---|---|
| pH – Range | -2.00 – 16.00 pH |
| pH – Resolution | 0.01 pH |
| pH – Accuracy | ±0.01 pH ±1 digit |
| pH – Temperature Compensation | 0 to 100°C (Auto or Manual) |
| mV – Range | -1000 mV – 0 – 1000 mV |
| mV – Resolution | 1 mV |
| mV – Accuracy | ±0.2% F.S |
| Temp. – Range | 0 to 100°C (23 to 212°F) |
| Temp. – Resolution | 0.1°C |
| Temp. – Accuracy | ±0.5°C ±1 digit |
| Calibration | Auto. 1–3 points |
| Buffer Recognition | USA: pH 1.68, 4.00, 7.00,10.01, 12.45; NIST: pH 1.68, 4.01, 6.86, 9.18, 12.45 |
| Reading Alarm | Yes |
| Reading Auto. Hold | Yes |
| Temperature Unit | ˚C or ˚F |
| Screen Backlight | 3-color backlight with auto. power off: Blue – measurement mode Green – calibration mode Red – reading alarm |
| Self-diagnosis | Yes |
| Power | AAA Batteries * 4 |
| IP Rating | IP67 |
| Dimensions& Weight | Tester: 40×40×178mm/133g; Case: 255×210×50mm/700g; |
| pH Electrode Technical Specs (LabSen 855) | |
| Membrane Type | HA |
| Housing Material | Lead-free glass |
| Temperature sensor | 30KΩ NTC |
| Junction | Ceramic |
| Reference Electrode | Silver Ion Trap Reference System |
| Electrolyte | Pre-pressurized gel KCl |
| Range | 0 to 14 pH |
| Temperature Range | 0 to 100°C |
| Connector | 8-pin |
Datasheets & Manuals
Document :
Product Information Sheet(Pdf)
Air Table Puck Joining Strip with Pulley Pivot
AUD 39.50(Ex GST)
LED Linear Decolorizing Shaker with Fixed Plate up to 2 kg, 40-200 rpm
AUD 286.50(Ex GST)
Ampoule for Vortex Mixture
AUD 44.50(Ex GST)
Block for Epp Tubes
From AUD 255.00 (Ex GST)
OIML F1 calibration weights for accurate weighing verification workflows
From AUD 17.25 (Ex GST)
Plastic Coated Wire Bottle Carrier for Laboratory Bottle Handling
AUD 69.90(Ex GST)
Glass Thermometer with Mercury, Yellow Back, Size 300 mm/ 600mm
From AUD 12.00 (Ex GST)
Three Finger Clamp with Double Adjustable Swivel Bosshead
AUD 39.90(Ex GST)
Cylindrical Dropping Funnel with PTFE Stopcock, Open Top, BORO 3.3 Glass
From AUD 27.50 (Ex GST)
Molecular Model Set, Inorganic / Organic Student Set
AUD 54.50(Ex GST)
You May Also Need
Save 10%
Benchtop Classical Series Multi-Parameter Meter for pH, Conductivity and DO Testing
From AUD 2,467.50 (Ex GST)
Save 10%
Benchtop Touch Screen Multi-Parameter Meter for pH and Conductivity Testing
From AUD 3,146.90 (Ex GST)
Calcium Ion Sensor, Replacement Sensor with 4 to 9900 ppm Range
AUD 227.70(Ex GST)
Nitrate Ion Electrode, Replacement Sensor with Selective Flat Electrode
AUD 227.70(Ex GST)
Pocket Ionized Calcium Meter, Cow Side Blood Testing with 0.3 mL Sample Volume
AUD 2,183.50(Ex GST)
Pocket Nitrate Ion Meter, 0.3 mL Sample Testing with Up to 2 Calibration Points
AUD 1,314.50(Ex GST)
Save 10%
Portable Multi-Parameter Meters for pH, Conductivity and Dissolved Oxygen Testing
From AUD 1,723.50 (Ex GST)
Salt Electrode, Replacement Sensor with 0.01 to 25% Salt Range
AUD 227.70(Ex GST)
[porto_related_products_slider]
Recently Viewed Products
SELECT OPTIONS
Top Cup for Digital Vortex Mixer
AUD 18.50(Ex GST)
SELECT OPTIONS
Gay Lussac Alcoholometer, 0 to 100% Alcohol
AUD 72.50(Ex GST)
FEATURED PRODUCTS
BEST SELLING PRODUCTS
Petri Dishes, Polypropylene, Autoclavable & Reusable, High Quality
From AUD 1.20 (Ex GST)
Glass Petri Dishes with Lid, Autoclavable, Borosilicate Glass (BORO 3.3)
From AUD 3.90 (Ex GST)
Reagent Bottles, Wide Mouth, HDPE, Chemical-Resistant, Highly Reliable & Durable - Each
From AUD 1.50 (Ex GST)
LATEST PRODUCTS
TOP RATED PRODUCTS
What Our Customers Say
⭐⭐⭐⭐⭐
We ordered a set of customised BORO 3.3 borosilicate glassware for our teaching labs, and LabChoice Australia exceeded every expectation. From the first consultation to final delivery, their team listened carefully, offered expert advice, and ensured every piece matched our specifications perfectly.
The clarity and precision of the glassware are exceptional, and the quick turnaround made setup effortless. It’s refreshing to work with an Australian supplier who genuinely understands laboratory needs and takes pride in quality craftsmanship. We’ll definitely be returning to LabChoice for future glassware requirements
⭐⭐⭐⭐⭐
Our lab required high-precision BORO 3.3 glassware for analytical testing, and LabChoice Australia delivered outstanding results. The ordering process was simple, communication was clear, and every beaker and flask arrived perfectly calibrated and ready for use.
The quality of the glass is exceptional — resistant to heat, easy to clean, and consistently accurate in measurement. It’s reassuring to know there’s an Australian supplier that combines scientific precision with genuine customer care. I’d recommend LabChoice to any research team looking for dependable labware
⭐⭐⭐⭐⭐
We needed a set of customised borosilicate glassware for a specialised project, and LabChoice Australia delivered exactly what we envisioned. The team worked closely with us from design to production, ensuring every detail met our specifications. The craftsmanship is exceptional, and the turnaround time was impressive. It’s reassuring to know we can rely on them for unique, made-to-order pieces
⭐⭐⭐⭐⭐
LabChoice Australia has completely changed the way we source our lab glassware. The quality is consistently top-notch, and every piece meets the precision we need for reliable results. Their team knows their stuff, answers our questions quickly, and always goes the extra mile to help — they’re more like partners than just a supplier.
⭐⭐⭐⭐⭐
We trust LabChoice Australia because they deliver every time. Their borosilicate glassware is durable, accurate, and perfect for the high-heat work we do. Everything arrives well-packed with clear specs, so there are never surprises. It’s reassuring to deal with a supplier who understands both compliance and the demands of a busy lab