E
x
p
l
o
r
e
M
o
r
e
:
Mechanics & Fluids
Nylon Pulleys for Bench Clamp and Rod Mounting, 50 mm
From $24.50 (Ex GST)
From $24.50 (Ex GST)
- 50 mm nylon pulley range for bench clamp and rod-mounted mechanics setups
- Bench mounted pulley clamps to flat surfaces up to 25 mm thick
- Protective clamp pad helps reduce damage to bench surfaces
- Vertical adjustable pulley can be raised, lowered and pointed as required
- Universal bench clamp opens to 40 mm and holds devices up to 12.5 mm diameter
- Straight and bent rod pulleys use 8 mm × 200 mm anodised aluminium rods
- Suitable for supervised force, tension and cord-routing demonstrations
- Description
- Datasheets & Manuals
Description
The Nylon Pulleys for Bench Clamp and Rod Mounting, also known as 50 mm laboratory pulley mounting accessories, are designed for mechanics demonstrations involving cord routing, force direction, tension and pulley system setup. They are suitable for school physics laboratories, university teaching laboratories and supervised educational mechanics experiments. The bench mounted horizontal pulley uses a 50 mm diameter nylon pulley mounted on a strong aluminium frame. It is designed to clamp to a bench top or flat surface, with a maximum clamping thickness of 25 mm.
When clamped in position, the side of the pulley is parallel to the bench surface. This supports applications where a cord needs to run close to the table top and then pass back over the table surface during practical mechanics demonstrations. The clamp screw includes a protective pad on the tip to help reduce bench surface damage during installation. Users should confirm bench thickness, clamp grip and cord alignment before operation. The vertical adjustable pulley assembly uses a pulley on a bent rod with a universal bench clamp. The pulley can be raised high, lowered to table height or pointed in different directions, supporting flexible cord path setup during force and motion experiments.
The universal bench clamp opens to 40 mm and can hold compatible devices up to 12.5 mm diameter either vertically or horizontally. This supports practical mounting flexibility in classroom and laboratory demonstrations. Pulley-on-rod options are available in straight and offset bent formats. Each option uses a 50 mm diameter nylon pulley fixed to an 8 mm diameter anodised aluminium rod, 200 mm long. The rod design aligns the pulley groove with the rod to support a consistent cord path. The straight rod version can be held by a compatible bench clamp or by a retort stand and boss head. The offset bent rod version can also be held by a bench clamp or retort stand and boss head, with the bend supporting different positioning arrangements. These pulleys are intended for supervised educational use. Users should select the correct mounting method, clamp position, cord type and load arrangement according to the experiment, and check that all clamps and supports are secure before use.
LabChoice Australia supplies 50 mm Nylon Pulleys for Bench Clamp and Rod Mounting for school physics departments, university teaching laboratories and mechanics demonstration workspaces. They are suitable for supervised experiments involving force direction, tension, cord routing, pulley alignment, load movement and basic mechanics principles.
Datasheets & Manuals
Document :
Product Information Sheet(Pdf)
10-Channel Magnetic Stirrer, Brushless DC Motor, up to 0.4 L Capacity
$2,447.50(Ex GST)
Laboratory Tube and Cylinder Racks, Polypropylene Storage Type
From $13.90 (Ex GST)
Hofmann Voltameter Spare Platinum Electrodes, Pair
$114.90(Ex GST)
Recovery Bend Adapter Vertical BORO 3.3 Glass Laboratory Grade
From $12.90 (Ex GST)
Low Wall Porcelain Crucibles With Lid
From $1.90 (Ex GST)
Thermostat Control Adjustable Hot Plate
From $712.50 (Ex GST)
You May Also Need
Air Track System for Low Friction Linear Motion
From $249.50 (Ex GST)
ASEP Powder-Coated Stream Tray
$266.50(Ex GST)
Brass Slotted Weights, Mechanics and Force Experiment
From $4.90 (Ex GST)
Circular Motion Kit with Speed Control
From $32.90 (Ex GST)
Density Cubes, 2 cm Spare Cubes for Density and Buoyancy Experiments
From $3.50 (Ex GST)
Density Cubes, 2.5 cm Spare Cubes for Density and Buoyancy Experiments
From $4.90 (Ex GST)
Dynamics Carts, Laboratory Collision and Motion Kit
From $179.50 (Ex GST)
Large Demonstration Manometer, ±300 mm Range
$156.90(Ex GST)
Rolling Cylinder Pair, Metal and Plastic Set
$159.50(Ex GST)
Scale Pans with Hooks, Laboratory Weighing Unit
From $7.90 (Ex GST)
[porto_related_products_slider]
FEATURED PRODUCTS
BEST SELLING PRODUCTS
Polypropylene Filter Funnels, 50 mm to 150 mm Range
From $1.50 (Ex GST)
Glass Petri Dishes with Lid, Autoclavable, Borosilicate Glass (BORO 3.3)
From $3.90 (Ex GST)
What Our Customers Say
⭐⭐⭐⭐⭐
We ordered a set of customised BORO 3.3 borosilicate glassware for our teaching labs, and LabChoice Australia exceeded every expectation. From the first consultation to final delivery, their team listened carefully, offered expert advice, and ensured every piece matched our specifications perfectly.
The clarity and precision of the glassware are exceptional, and the quick turnaround made setup effortless. It’s refreshing to work with an Australian supplier who genuinely understands laboratory needs and takes pride in quality craftsmanship. We’ll definitely be returning to LabChoice for future glassware requirements
⭐⭐⭐⭐⭐
Our lab required high-precision BORO 3.3 glassware for analytical testing, and LabChoice Australia delivered outstanding results. The ordering process was simple, communication was clear, and every beaker and flask arrived perfectly calibrated and ready for use.
The quality of the glass is exceptional — resistant to heat, easy to clean, and consistently accurate in measurement. It’s reassuring to know there’s an Australian supplier that combines scientific precision with genuine customer care. I’d recommend LabChoice to any research team looking for dependable labware
⭐⭐⭐⭐⭐
We needed a set of customised borosilicate glassware for a specialised project, and LabChoice Australia delivered exactly what we envisioned. The team worked closely with us from design to production, ensuring every detail met our specifications. The craftsmanship is exceptional, and the turnaround time was impressive. It’s reassuring to know we can rely on them for unique, made-to-order pieces
⭐⭐⭐⭐⭐
LabChoice Australia has completely changed the way we source our lab glassware. The quality is consistently top-notch, and every piece meets the precision we need for reliable results. Their team knows their stuff, answers our questions quickly, and always goes the extra mile to help — they’re more like partners than just a supplier.
⭐⭐⭐⭐⭐
We trust LabChoice Australia because they deliver every time. Their borosilicate glassware is durable, accurate, and perfect for the high-heat work we do. Everything arrives well-packed with clear specs, so there are never surprises. It’s reassuring to deal with a supplier who understands both compliance and the demands of a busy lab
