E
x
p
l
o
r
e
M
o
r
e
:
Mechanics & Fluids
Air Track Operation Kit for 2 m and 2.5 m Tracks
AUD 458.90(Ex GST)
AUD 458.90(Ex GST)
- Air track operation kit for physics experiments
- Suitable for compatible 2 m and 2.5 m air tracks
- Same operation kit is used for both track lengths
- Includes 2 long gliders and 2 short gliders
- Includes spring buffers and non-spring buffers
- Includes various springs and loop springs
- Includes track pulley, magnets, weights and inclination blocks
- Supplied with instructions
- Designed for performing air track motion experiments
- Included with complete 2.5 m MF0105Z-001 and 2 m MF0107Z-001 air tracks
- Also available separately as a replacement or accessory kit
- Use under appropriate laboratory or educational supervision
[request_quote_button]
- Description
- Datasheets & Manuals
Description
The Air Track Operation Kit for 2 m and 2.5 m Tracks, also known as an IEC air track experiment accessory kit, is designed for performing physics experiments with compatible air track systems. This is the air track operation kit and contains a large set of parts required for carrying out air track demonstrations and student investigations. The operation kit is the same for both compatible 2 m and 2.5 m air tracks, supporting consistent use across different air track lengths. The kit includes 2 long gliders and 2 short gliders, allowing users to perform motion, collision, velocity, acceleration and momentum demonstrations according to the approved experiment method.
It also includes spring buffers, non-spring buffers, various springs and loop springs for experiments involving impacts, oscillation, elastic interaction and restoring forces. The included track pulley, magnets, weights and inclination blocks provide additional setup options for mechanics experiments involving force, acceleration, inclined motion and interaction between gliders. This operation kit is included in the 2.5 m LC-80-MF0105Z-001 and 2 m LC-80-MF0107Z-001 complete air track systems, but it can also be obtained separately where replacement parts or additional experiment accessories are required.
The kit is suitable for school science laboratories, physics classrooms, university teaching laboratories and STEM education environments requiring practical accessories for air track mechanics experiments. Users should confirm compatibility with the specific air track model before ordering or use. Gliders, springs, pulleys, magnets and weights should be handled carefully. Keep hands clear of moving gliders, avoid overstretching springs and keep magnets away from sensitive electronic devices or magnetic storage media. This product is intended for laboratory or educational settings only and should be used under appropriate teacher or laboratory supervision. This item is supplied as the Air Track Operation Kit with instructions only. Air track, blower, photogates, digital timer, power supply, worksheets and additional air track accessories are not included unless specified separately.
LabChoice Australia supplies Air Track Operation Kits for school science laboratories, physics classrooms, university teaching laboratories and STEM programs requiring practical accessories for motion, force and momentum experiments.
Datasheets & Manuals
Document :
Product Information Sheet(Pdf)
12 V DC Electric Kinetic Theory Model Apparatus
AUD 356.50(Ex GST)
Compass Set of 20 in Storage Container with Calibration Strip
AUD 359.90(Ex GST)
Hodson Light Box and Optical Set, 12 V
From AUD 190.50 (Ex GST)
Glass Low Form Beaker BORO 3.3 Size 1000 ML – 4 Pcs/Box
AUD 42.00(Ex GST)
Flat Bottom Flask Two Neck Jointed, BORO 3.3 Glass
From AUD 19.90 (Ex GST)
Air Track End Plug for Track Tube
AUD 5.50(Ex GST)
Desiccator Jar With Lid Plain, Die Presses Neutral Glass, High Quality Laboratory Grade
From AUD 132.00 (Ex GST)
Low Power Simple Light Source, 4 mm Sockets, 2.5 V MES
AUD 39.90(Ex GST)
8 Inch ASTM Test Sieve with 302 Grade Stainless Steel Frame and Wire Mesh
From AUD 159.90 (Ex GST)
Glass Stirring Rods with Paddle End, Pack of 10
From AUD 11.50 (Ex GST)
You May Also Need
12 V DC Electric Kinetic Theory Model Apparatus
AUD 356.50(Ex GST)
Adjustable Inclined Plane with Pulley and Angle Scale
From AUD 137.50 (Ex GST)
Air Track Spark Recording Kits without generator
From AUD 389.50 (Ex GST)
Cartesian Diver, 100 mm Glass Archimedes Principle Demonstrator
AUD 7.50(Ex GST)
Density Cubes, 2 cm Spare Cubes for Density Experiments
From AUD 3.50 (Ex GST)
Density Cubes, 2.5 cm Spare Cubes for Density and Buoyancy Experiments
From AUD 4.90 (Ex GST)
Free Fall Apparatus, Mechanical and Solenoid Release
From AUD 355.50 (Ex GST)
Hooke’s Law Tension Spring Sets, Variable Spring Constant Type
From AUD 28.90 (Ex GST)
I-Gauge Mechanics Demonstrator, Height and Speed Measurement Teaching Set
AUD 610.50(Ex GST)
Large Demonstration Manometer, ±300 mm Range
AUD 156.90(Ex GST)
PSSC Helical Steel Spring Kit
AUD 87.50(Ex GST)
Rolling Cylinder Pair, Metal and Plastic Set
AUD 159.50(Ex GST)
Simple Wheel and Axle Pulley Set, Two Sizes Included 150 mm and 75 mm
AUD 89.90(Ex GST)
[porto_related_products_slider]
Recently Viewed Products
SELECT OPTIONS
Magnetic Line Coloured Chips, 100 g Pack
AUD 80.90(Ex GST)
SELECT OPTIONS
Biological Digestive System Model on Board, Life Size
AUD 236.90(Ex GST)
FEATURED PRODUCTS
BEST SELLING PRODUCTS
Reagent Bottles, Wide Mouth, HDPE, Chemical-Resistant, Highly Reliable & Durable - Each
From AUD 1.50 (Ex GST)
Petri Dishes, Polypropylene, Autoclavable & Reusable, High Quality
From AUD 1.20 (Ex GST)
Glass Petri Dishes with Lid, Autoclavable, Borosilicate Glass (BORO 3.3)
From AUD 3.90 (Ex GST)
LATEST PRODUCTS
Brass Slotted Weights, Individual, 5 g to 100 g
From AUD 4.90 (Ex GST)
Density Cube Set, 1.0 cm Edge, Set of 6 in Plastic Box
AUD 18.90(Ex GST)
Density Cube Sets, 5 Cubes, 2.0 cm and 2.5 cm
From AUD 37.50 (Ex GST)
TOP RATED PRODUCTS
Brass Slotted Weights, Individual, 5 g to 100 g
From AUD 4.90 (Ex GST)
Density Cube Set, 1.0 cm Edge, Set of 6 in Plastic Box
AUD 18.90(Ex GST)
Density Cube Sets, 5 Cubes, 2.0 cm and 2.5 cm
From AUD 37.50 (Ex GST)
What Our Customers Say
⭐⭐⭐⭐⭐
We ordered a set of customised BORO 3.3 borosilicate glassware for our teaching labs, and LabChoice Australia exceeded every expectation. From the first consultation to final delivery, their team listened carefully, offered expert advice, and ensured every piece matched our specifications perfectly.
The clarity and precision of the glassware are exceptional, and the quick turnaround made setup effortless. It’s refreshing to work with an Australian supplier who genuinely understands laboratory needs and takes pride in quality craftsmanship. We’ll definitely be returning to LabChoice for future glassware requirements
⭐⭐⭐⭐⭐
Our lab required high-precision BORO 3.3 glassware for analytical testing, and LabChoice Australia delivered outstanding results. The ordering process was simple, communication was clear, and every beaker and flask arrived perfectly calibrated and ready for use.
The quality of the glass is exceptional — resistant to heat, easy to clean, and consistently accurate in measurement. It’s reassuring to know there’s an Australian supplier that combines scientific precision with genuine customer care. I’d recommend LabChoice to any research team looking for dependable labware
⭐⭐⭐⭐⭐
We needed a set of customised borosilicate glassware for a specialised project, and LabChoice Australia delivered exactly what we envisioned. The team worked closely with us from design to production, ensuring every detail met our specifications. The craftsmanship is exceptional, and the turnaround time was impressive. It’s reassuring to know we can rely on them for unique, made-to-order pieces
⭐⭐⭐⭐⭐
LabChoice Australia has completely changed the way we source our lab glassware. The quality is consistently top-notch, and every piece meets the precision we need for reliable results. Their team knows their stuff, answers our questions quickly, and always goes the extra mile to help — they’re more like partners than just a supplier.
⭐⭐⭐⭐⭐
We trust LabChoice Australia because they deliver every time. Their borosilicate glassware is durable, accurate, and perfect for the high-heat work we do. Everything arrives well-packed with clear specs, so there are never surprises. It’s reassuring to deal with a supplier who understands both compliance and the demands of a busy lab