Copper Calorimeter Cups, Nickel Plated, 50 × 75 mm and 75 × 100 mm
From AUD 26.50 (Ex GST)
From AUD 26.50 (Ex GST)
- Copper calorimeter cup range for teaching calorimetry experiments
- Available in standard small and large size options
- Small cup size listed as 50 × 75 mm, diameter × height
- Large cup size listed as 75 × 100 mm, diameter × height
- Spun from copper sheet for practical classroom laboratory use
- Rolled edge supports safer handling and improved rim durability
- Polished with nickel plated outside finish
- Suitable for compatible calorimeter lids, inserts and insulation accessories
- Supplied as calorimeter cup only
- Confirm required cup size, lid fit and experiment suitability before ordering
[request_quote_button]
- Description
- Datasheets & Manuals
Description
The Copper Calorimeter Cups, Nickel Plated, also known as copper laboratory calorimeter cups, are designed for school and teaching laboratory calorimetry experiments where a practical metal cup is required for heat transfer investigations. These calorimeter cups are spun from copper sheet, supporting good heat transfer performance during suitable classroom experiments. The polished nickel plated outside finish provides a clean laboratory appearance and supports routine handling. Two size options are available. The standard small calorimeter cup measures 50 × 75 mm, diameter × height. The larger calorimeter cup measures 75 × 100 mm, diameter × height.
Each cup is supplied with a rolled edge, helping improve rim strength and making the cup easier to handle during normal laboratory setup and cleaning. These cups are suitable for compatible calorimetry activities involving heat transfer, temperature change, electrical heating demonstrations, specific heat investigations and general teaching experiments where the selected cup size is appropriate. The 50 × 75 mm cup may be used with compatible calorimeter lids, Joule’s inserts and insulation accessories where fitment has been confirmed. The 75 × 100 mm cup is suitable where a larger calorimeter cup format is required.
Users should confirm cup diameter, cup height, compatible lid size, insert fit, insulation box compatibility and experiment method before purchase or classroom use. This item is supplied as the selected copper calorimeter cup only. Lid, stirrer, thermometer, Joule’s insert, insulation box, water and any additional accessories are not included unless specified separately.
LabChoice Australia supplies Copper Calorimeter Cups for school science laboratories, chemistry teaching spaces, physics classrooms and general education laboratories requiring practical apparatus for calorimetry and heat transfer experiments.
Datasheets & Manuals
Document :
Product Information Sheet(Pdf)
Surgical Blades, Laboratory Cutting Blade Range Pack of 100
From AUD 27.50 (Ex GST)
N-Propylthiouracil Test Paper Strips, 100 Strip Pack
AUD 12.50(Ex GST)
Clay Pipe Triangle for Bunsen Burner, Ceramic Coated Wire for Stable Heating, High Quality
From AUD 1.90 (Ex GST)
3-Shelf Laboratory Trolley, Aluminium Frame, Polypropylene Shelves
AUD 190.90(Ex GST)
Sterile Cell Scrapers, Rotating Blade Tissue Culture Range
From AUD 2.50 (Ex GST)
Bottle Top Dispensers, Autoclavable Adjustable Volume ISO 8655 Certified Type
From AUD 518.50 (Ex GST)
Save 15%
Amber Burette with PTFE Stopcock, Class B Accuracy, BORO 3.3
From AUD 38.17 (Ex GST)
Density Cube Sets, 5 Cubes, 2.0 cm and 2.5 cm
From AUD 37.50 (Ex GST)
You May Also Need
Brass Bar with Expansion Gauge and Insulated Handle
AUD 47.50(Ex GST)
Calorimeter Heating Blocks, Educational Metal Block Set for Heat Studies
From AUD 62.50 (Ex GST)
Cast Iron Bar Breaker Apparatus
From AUD 225.50 (Ex GST)
Complete Diffraction Practical Kit with Slits and Optical Filters
AUD 78.50(Ex GST)
Convection in Air Apparatus- Mine Shaft Apparatus
AUD 72.50(Ex GST)
Flat Glass Plates Set of 6 for Interference Experiments
AUD 59.90(Ex GST)
Frosted Acrylic Projection Screen with Feet, 200 × 200 mm
AUD 33.90(Ex GST)
High Power QI Light Source, 12 V × 100 W
AUD 224.50(Ex GST)
Holographic Diffraction Gratings
From AUD 12.50 (Ex GST)
Hot/Cold Thermopile on Heat Sink with Socket Terminals
AUD 123.50(Ex GST)
Mini Spectral Lamp Power Supply and Holder, Without Lamp
AUD 435.90(Ex GST)
Simple Copper–Constantan Thermocouple, 200 mm Length
AUD 9.90(Ex GST)
Spectrum Tube EHV Unit and Tube Support, Without Tubes
AUD 422.50(Ex GST)
Thermal Conductivity Rod Kit
AUD 27.50(Ex GST)
[porto_related_products_slider]
FEATURED PRODUCTS
BEST SELLING PRODUCTS
Glass Petri Dishes with Lid, Autoclavable, Borosilicate Glass (BORO 3.3)
From AUD 3.90 (Ex GST)
Reagent Bottles, Wide Mouth, HDPE, Chemical-Resistant, Highly Reliable & Durable - Each
From AUD 1.50 (Ex GST)
Petri Dishes, Polypropylene, Autoclavable & Reusable, High Quality
From AUD 1.20 (Ex GST)
What Our Customers Say
⭐⭐⭐⭐⭐
We ordered a set of customised BORO 3.3 borosilicate glassware for our teaching labs, and LabChoice Australia exceeded every expectation. From the first consultation to final delivery, their team listened carefully, offered expert advice, and ensured every piece matched our specifications perfectly.
The clarity and precision of the glassware are exceptional, and the quick turnaround made setup effortless. It’s refreshing to work with an Australian supplier who genuinely understands laboratory needs and takes pride in quality craftsmanship. We’ll definitely be returning to LabChoice for future glassware requirements
⭐⭐⭐⭐⭐
Our lab required high-precision BORO 3.3 glassware for analytical testing, and LabChoice Australia delivered outstanding results. The ordering process was simple, communication was clear, and every beaker and flask arrived perfectly calibrated and ready for use.
The quality of the glass is exceptional — resistant to heat, easy to clean, and consistently accurate in measurement. It’s reassuring to know there’s an Australian supplier that combines scientific precision with genuine customer care. I’d recommend LabChoice to any research team looking for dependable labware
⭐⭐⭐⭐⭐
We needed a set of customised borosilicate glassware for a specialised project, and LabChoice Australia delivered exactly what we envisioned. The team worked closely with us from design to production, ensuring every detail met our specifications. The craftsmanship is exceptional, and the turnaround time was impressive. It’s reassuring to know we can rely on them for unique, made-to-order pieces
⭐⭐⭐⭐⭐
LabChoice Australia has completely changed the way we source our lab glassware. The quality is consistently top-notch, and every piece meets the precision we need for reliable results. Their team knows their stuff, answers our questions quickly, and always goes the extra mile to help — they’re more like partners than just a supplier.
⭐⭐⭐⭐⭐
We trust LabChoice Australia because they deliver every time. Their borosilicate glassware is durable, accurate, and perfect for the high-heat work we do. Everything arrives well-packed with clear specs, so there are never surprises. It’s reassuring to deal with a supplier who understands both compliance and the demands of a busy lab