Low-Speed Multi-Rotor Centrifuge with Blood, Urine and Faecal Programs, up to 4,000 rpm
- Adjustable speed range from 500 to 4,000 rpm in 100 rpm increments, delivering up to 2,500 × g
- Supports swing-out and angle rotor options for blood collection tubes and centrifuge tubes
- Available capacities include 6 × 15 mL, 4 × 50 mL, 24 × 15 mL, 12 × 10 mL and 8 × 15 mL
- Three routine programs are configured for blood, urine and faecal sample processing
- Three acceleration levels and four deceleration levels support controlled starting and braking
- LCD allows operating speed to be set and monitored in either rpm or RCF
- Maintenance-free brushless DC motor supports quiet operation at ≤62 dB(A)
- Description
Description
The Low-Speed Multi-Rotor Centrifuge, also known as a clinical benchtop centrifuge, is designed for routine sample preparation in clinical diagnostic, pathology, hospital, medical research and laboratory teaching environments. Its compatibility with both swing-out and angle rotors allows laboratories to process several commonly used blood collection and centrifuge tube formats on one instrument.
The centrifuge operates from 500 to 4,000 rpm in adjustable 100 rpm increments and generates a maximum relative centrifugal force of 2,500 × g. Speed accuracy is specified at ±100 rpm. The LCD allows users to select and view operating parameters in either rpm or RCF, helping laboratories follow methods written using rotational speed or centrifugal force.
Available rotor configurations include a swing-out rotor for 6 × 15 mL tubes, a swing-out rotor for 4 × 50 mL tubes, an angle rotor for 24 × 15 mL tubes, an angle rotor for 12 × 10 mL tubes and an angle rotor for 8 × 15 mL tubes. The appropriate rotor should be selected according to the tube dimensions, sample volume and validated laboratory method.
Three routine programs support common clinical sample-processing workflows. The blood program operates at 3,200 rpm for 10 minutes, the urine program at 1,800 rpm for 5 minutes and the faecal program at 1,300 rpm for 10 minutes. These settings provide convenient starting parameters, but laboratories should confirm that each program is appropriate for their specimen type, tube manufacturer instructions and internal procedure.
Run time can be set from 1 to 99 minutes, with HOLD mode available for continuous operation. Three acceleration levels and four deceleration levels allow the starting and braking response to be adjusted according to the sample and separation requirements. Gentler deceleration can help reduce disturbance of separated layers or sediment at the end of a centrifugation cycle.
The maintenance-free brushless DC motor supports repeated routine use while maintaining a specified noise level of no more than 62 dB(A). Automatic internal diagnosis and self-detection functions monitor the instrument during operation. The centrifuge measures 364 × 440 × 268 mm, weighs 14.5 kg and operates from a single-phase 100 to 240 V, 50/60 Hz electrical supply.
LabChoice Australia supplies this Low-Speed Multi-Rotor Centrifuge for clinical diagnostic laboratories, pathology laboratories, hospital laboratories, blood collection centres, urinalysis laboratories, medical schools, university teaching laboratories and biomedical research facilities. It is suitable for routine processing of compatible blood, urine, faecal and general laboratory samples using the correct rotor, tube configuration and validated centrifugation procedure.
| Specification | Details |
|---|---|
| Product type | Low speed centrifuge |
| Speed range | 500 to 4,000 rpm |
| Speed increment | 100 rpm |
| Maximum RCF | 2,500 x g |
| Speed accuracy | ±100 rpm |
| Rotor types | A12-10P, A8-15P, A24-15P, S6-15 and S4-50 |
| Rotor capacity | Swing 6 x 15 mL, swing 4 x 50 mL, angle 24 x 15 mL, angle 12 x 10 mL and angle 8 x 15 mL |
| Run time | 1 to 99 minutes, HOLD |
| Display | LCD |
| Safety devices | Automatic internal diagnosis and self-detection |
| Acceleration/Braking levels | 3 acceleration levels and 4 deceleration levels |
| Routine programs | Blood, urine and faecal programs |
| Program settings | Blood 3200 rpm for 10 min, urine 1800 rpm for 5 min, faecal 1300 rpm for 10 min |
| Motor type | Brushless DC motor |
| Power | Single-phase, 100 V to 240 V, 50 Hz/60 Hz |
| Dimensions | 364 x 440 x 268 mm |
| Weight | 14.5 kg |
| Noise level | ≤62 dB(A) |
Frequently Bought Together
10-Level Conductivity Tester
$52.50(Ex GST)
Gas Manifold for Block Heaters
From $1,032.00 (Ex GST)
Erlenmeyer Jointed Conical Flask without Graduation, BORO 3.3 Glass
From $59.90 (Ex GST)
Petri Dish 90 mm, Polystyrene, Gamma Sterile - Pack of 500 Pcs
From $151.50 (Ex GST)
Basic Electricity Circuit Kits, Educational Circuit Components Lab Set
From $171.90 (Ex GST)
Complete Circuits Kit with Wire Card and Accessories (ASEP)
$64.90(Ex GST)
Dynamics Carts, Laboratory Collision and Motion Kit
From $179.50 (Ex GST)
3D Botany Teaching Models, Plant Anatomy Demonstration Range
From $99.90 (Ex GST)
Measuring Cylinder, Polypropylene, Tough, Lightweight & Reusable
From $2.00 (Ex GST)
Similar Products
5 Roller Tube Mixer
From $1,993.00 (Ex GST)
Block for Cuvettes
$392.00(Ex GST)
Block for Falcon Tubes
From $255.00 (Ex GST)
Digital Laboratory Water bath, 7 L to 50 L with Heating Temperature Control
From $2,067.00 (Ex GST)
Humidity Measurement Instruments For Laboratory
From $12.50 (Ex GST)
Laboratory Dry Bath Incubator
$976.50(Ex GST)
Medium Orbital Shaker Analogue
$2,062.00(Ex GST)
Micro Tray Block
From $308.00 (Ex GST)
Rotary Tube Mixer with Disc
$1,439.00(Ex GST)
Round Block with Holes For Tubes
From $227.00 (Ex GST)
Simmerstat Hot Plates
From $580.90 (Ex GST)
Simple Heating Mantles, Controlled Heating for Round Bottom Flasks
From $311.50 (Ex GST)
Vernier Calipers For Laboratory and Educational Work
From $9.90 (Ex GST)
Vortex Mixer, up to 3000 rpm
From $542.00 (Ex GST)
[porto_related_products_slider]
FEATURED PRODUCTS
BEST SELLING PRODUCTS
Polypropylene Filter Funnels, Gravity Filtration Range
From $1.50 (Ex GST)
Glass Petri Dishes with Lid, Autoclavable, Borosilicate Glass (BORO 3.3)
From $3.90 (Ex GST)
What Our Customers Say
⭐⭐⭐⭐⭐
We ordered a set of customised BORO 3.3 borosilicate glassware for our teaching labs, and LabChoice Australia exceeded every expectation. From the first consultation to final delivery, their team listened carefully, offered expert advice, and ensured every piece matched our specifications perfectly.
The clarity and precision of the glassware are exceptional, and the quick turnaround made setup effortless. It’s refreshing to work with an Australian supplier who genuinely understands laboratory needs and takes pride in quality craftsmanship. We’ll definitely be returning to LabChoice for future glassware requirements
⭐⭐⭐⭐⭐
Our lab required high-precision BORO 3.3 glassware for analytical testing, and LabChoice Australia delivered outstanding results. The ordering process was simple, communication was clear, and every beaker and flask arrived perfectly calibrated and ready for use.
The quality of the glass is exceptional — resistant to heat, easy to clean, and consistently accurate in measurement. It’s reassuring to know there’s an Australian supplier that combines scientific precision with genuine customer care. I’d recommend LabChoice to any research team looking for dependable labware
⭐⭐⭐⭐⭐
We needed a set of customised borosilicate glassware for a specialised project, and LabChoice Australia delivered exactly what we envisioned. The team worked closely with us from design to production, ensuring every detail met our specifications. The craftsmanship is exceptional, and the turnaround time was impressive. It’s reassuring to know we can rely on them for unique, made-to-order pieces
⭐⭐⭐⭐⭐
LabChoice Australia has completely changed the way we source our lab glassware. The quality is consistently top-notch, and every piece meets the precision we need for reliable results. Their team knows their stuff, answers our questions quickly, and always goes the extra mile to help — they’re more like partners than just a supplier.
⭐⭐⭐⭐⭐
We trust LabChoice Australia because they deliver every time. Their borosilicate glassware is durable, accurate, and perfect for the high-heat work we do. Everything arrives well-packed with clear specs, so there are never surprises. It’s reassuring to deal with a supplier who understands both compliance and the demands of a busy lab