Low-Speed Blood Tube Centrifuge with 6-Place Rotor, up to 3,400 rpm
- Fixed operating speed of 3,400 rpm delivers a maximum RCF of 1,600 × g
- Six-place rotor accommodates 6 × 3 to 10 mL blood collection tubes
- Electronic timer operates from 30 seconds to 30 minutes, with continuous mode available
- LED display shows the remaining centrifugation time during operation
- One acceleration level and three deceleration levels include soft braking for controlled stopping
- Automatic and mechanical lid-locking systems support secure centrifugation
- Suitable for serum and plasma separation in clinical, biochemical and medical laboratories
- Description
Description
The Low-Speed Blood Tube Centrifuge, also known as a clinical laboratory centrifuge, is designed for routine separation of serum and plasma from compatible blood collection tubes. Its six-place rotor accommodates 3 to 10 mL tubes, making the unit suitable for small-batch sample preparation in clinical diagnostics, medical testing and laboratory teaching environments.
The centrifuge operates at a fixed speed of 3,400 rpm and generates a maximum relative centrifugal force of 1,600 × g. These operating conditions support routine blood sample separation procedures where compatible tube specifications and validated laboratory protocols require low-speed centrifugation.
The electronic timer can be set from 30 seconds to 30 minutes, while continuous operation is available for procedures requiring an unrestricted run period. The LED display shows the remaining operating time, allowing laboratory personnel to monitor cycle progress clearly during sample processing.
One acceleration level and three selectable deceleration levels allow the stopping response to be adjusted according to the separation procedure. The soft-braking option helps reduce disturbance of separated serum or plasma layers when gentler deceleration is required.
The automatic lid lock prevents the lid from opening while the rotor is operating. A robust mechanical lid-locking system provides additional containment, while the transparent lid allows users to observe the chamber and supports optical calibration procedures. The manufacturer also states that the centrifuge has passed an explosion-proof test and includes door-lock protection with manual release after the rotor has stopped.
The AC fixed-frequency brushless motor supports routine operation with a specified noise level of no more than 63 dB. The compact unit measures 359 × 318 × 222 mm, weighs 5.3 kg and operates from either 100 to 120 V or 200 to 240 V, 50/60 Hz electrical supplies with a rated power of 80 W.
LabChoice Australia supplies this Low-Speed Blood Tube Centrifuge for clinical diagnostic laboratories, pathology laboratories, blood banks, hospital laboratories, biochemical laboratories, medical schools, universities and research institutes. It is suitable for pre-analytical processing of compatible blood samples and routine serum or plasma separation performed according to validated laboratory procedures.
| Specification | Details |
|---|---|
| Product type | Low speed centrifuge |
| Speed range | 3,400 rpm |
| Maximum RCF | 1,600 x g |
| Rotor type | SE6-10P |
| Rotor capacity | 6 x 3-10 mL blood collection tubes |
| Run time | 30 seconds to 30 minutes or continuous operation |
| Display | LED |
| Timer | Electronic timer |
| Acceleration/Braking | 1 acceleration rate and 3 deceleration rates |
| Braking function | Soft braking |
| Motor type | AC fixed frequency brushless motor |
| Power | 100 V to 120 V or 200 V to 240 V, 50/60 Hz, 80 W |
| Dimensions | 359 x 318 x 222 mm |
| Weight | 5.3 kg |
| Noise level | ≤63 dB |
| Lid | Transparent lid |
| Safety devices | Explosion-proof test passed, door lock protection enabled and manual door lock release after stopping |
| Lid safety | Automatic lid lock prevents opening during operation |
| Mechanical safety | Robust mechanical lid lock helps prevent debris from escaping |
| Main application | Serum and plasma sample separation |
| Use area | Clinical, biochemical and medical laboratories |
JAVAC VCL 452 Vacuum Pump, Two Stage SAE Tri Connector Type
$475.90(Ex GST)
LCD Glass Ceramic Magnetic Stirrer, 4 Inch, up to 10 L Capacity
$874.50(Ex GST)
Single Range Student Meters For Circuit
From $43.90 (Ex GST)
Plastic Slide Boxes, Heavy Wall Microscope Slide Storage Range
From $6.50 (Ex GST)
Science Charts, Classroom Reference Posters for Lab Chemistry
From $47.50 (Ex GST)
LCD Digital Tube Rotator with 8-Place 50 mL Tube Holder Disk
$1,806.50(Ex GST)
Caps for Head Space Vials
From $75.50 (Ex GST)
Similar Products
Block for Falcon Tubes
From $255.00 (Ex GST)
Digital Dry Block Heater with Microprocessor Control, 200°C with LED Display
From $1,382.00 (Ex GST)
Hybridisation Oven Platform
From $1,366.00 (Ex GST)
Immersion Cooler
$5,749.00(Ex GST)
Laboratory Dry Bath Incubator
$976.50(Ex GST)
Laboratory Water Bath with Hot Plate
From $236.90 (Ex GST)
Medium Orbital Shaker Analogue
$2,062.00(Ex GST)
Mini Roller Mixers, Standard Tube and Bottle Laboratory Type
From $2,070.00 (Ex GST)
Plastic Coated Wire Bottle Carrier
$69.90(Ex GST)
Recirculating Cooler with Tank
$8,262.00(Ex GST)
Rotary Tube Mixer with Disc
$1,439.00(Ex GST)
Simmerstat Hot Plates
From $580.90 (Ex GST)
Simple Heating Mantles, Controlled Heating for Round Bottom Flasks
From $311.50 (Ex GST)
Vernier Calipers For Laboratory and Educational Work
From $9.90 (Ex GST)
[porto_related_products_slider]
FEATURED PRODUCTS
BEST SELLING PRODUCTS
Polypropylene Filter Funnels, Gravity Filtration Range
From $1.50 (Ex GST)
Glass Petri Dishes with Lid, Autoclavable, Borosilicate Glass (BORO 3.3)
From $3.90 (Ex GST)
What Our Customers Say
⭐⭐⭐⭐⭐
We ordered a set of customised BORO 3.3 borosilicate glassware for our teaching labs, and LabChoice Australia exceeded every expectation. From the first consultation to final delivery, their team listened carefully, offered expert advice, and ensured every piece matched our specifications perfectly.
The clarity and precision of the glassware are exceptional, and the quick turnaround made setup effortless. It’s refreshing to work with an Australian supplier who genuinely understands laboratory needs and takes pride in quality craftsmanship. We’ll definitely be returning to LabChoice for future glassware requirements
⭐⭐⭐⭐⭐
Our lab required high-precision BORO 3.3 glassware for analytical testing, and LabChoice Australia delivered outstanding results. The ordering process was simple, communication was clear, and every beaker and flask arrived perfectly calibrated and ready for use.
The quality of the glass is exceptional — resistant to heat, easy to clean, and consistently accurate in measurement. It’s reassuring to know there’s an Australian supplier that combines scientific precision with genuine customer care. I’d recommend LabChoice to any research team looking for dependable labware
⭐⭐⭐⭐⭐
We needed a set of customised borosilicate glassware for a specialised project, and LabChoice Australia delivered exactly what we envisioned. The team worked closely with us from design to production, ensuring every detail met our specifications. The craftsmanship is exceptional, and the turnaround time was impressive. It’s reassuring to know we can rely on them for unique, made-to-order pieces
⭐⭐⭐⭐⭐
LabChoice Australia has completely changed the way we source our lab glassware. The quality is consistently top-notch, and every piece meets the precision we need for reliable results. Their team knows their stuff, answers our questions quickly, and always goes the extra mile to help — they’re more like partners than just a supplier.
⭐⭐⭐⭐⭐
We trust LabChoice Australia because they deliver every time. Their borosilicate glassware is durable, accurate, and perfect for the high-heat work we do. Everything arrives well-packed with clear specs, so there are never surprises. It’s reassuring to deal with a supplier who understands both compliance and the demands of a busy lab