E
x
p
l
o
r
e
M
o
r
e
:
Mechanics & Fluids
Air Track Sub Base Kits, 2 m and 2.5 m
From AUD 249.50 (Ex GST)
From AUD 249.50 (Ex GST)
- Optional sub base kits for compatible air track systems
- Available for 2 m and 2.5 m air tracks
- 2 m version is listed as a 10 stud kit
- 2.5 m version is listed as a 12 stud kit
- Supplied complete with assembly kit
- Mounts below the air tube for added support
- Adjustable screws help pull the air tube as straight as possible
- Designed to improve air track alignment and performance
- Feet are removed from the tube and fitted to the sub base
- Commonly used to improve straightness of 2.5 m or longer air tracks
- Suitable for physics classrooms and teaching laboratories
- Use under appropriate laboratory or educational supervision
[request_quote_button]
- Description
- Datasheets & Manuals
Description
The Air Track Sub Base Kits, 2 m and 2.5 m, also known as air track support base kits, are designed for compatible air track systems used in physics and mechanics experiments. The sub base is an optional device that mounts below the air tube and is joined with sets of adjustable screws to help pull the air tube as straight as possible for best performance. During installation, the feet are removed from the air tube and fitted instead to the sub base, allowing the sub base to provide the primary support structure for the track.
The 2 m sub base is supplied complete with assembly kit and is listed as a 10 stud kit for compatible 2 m air tracks. The 2.5 m sub base is supplied complete with assembly kit and is listed as a 12 stud kit for compatible 2.5 m air tracks. Sub bases are often used to improve the straightness of 2.5 m or longer air tracks, where additional support can help maintain better alignment over the full track length. The 2 m air track is normally used without a sub base, although users may choose to add the sub base when a very straight track setup is preferred. These kits are useful for air track experiments involving low-friction motion, velocity, acceleration, momentum, collision studies and glider movement where track straightness supports better experimental consistency.
Users should confirm compatibility with the specific air track length and model before ordering or installation. Installation and adjustment should be carried out carefully so the air track is stable, level and correctly supported before use. This product is intended for laboratory or educational settings only and should be used under appropriate teacher or laboratory supervision. This item is supplied as the selected Air Track Sub Base with assembly kit only. Air tube, complete air track, blower, gliders, photogates, timer, operation kit, worksheets and additional accessories are not included unless specified separately.
LabChoice Australia supplies Air Track Sub Base Kits for school science laboratories, physics classrooms, university teaching laboratories and STEM programs requiring practical support accessories for air track alignment and mechanics experiments.
Datasheets & Manuals
Document :
Product Information Sheet(Pdf)
Reflux Condenser Angled BORO 3.3 Borosilicate Glass
From AUD 73.90 (Ex GST)
PSSC Inertial Balance Experiment Kit
AUD 77.50(Ex GST)
Seismograph Teaching Model, Classroom Seismology Demonstration Set
AUD 83.50(Ex GST)
Single Contact Key for Simple Circuit Switch
AUD 14.90(Ex GST)
Brass Slotted Weight Carrier Only, Economy, 50 g and 100 g
From AUD 11.50 (Ex GST)
Biochemical Oxygen Demand (BOD) Bottle , BORO 3.3 Glass
From AUD 12.90 (Ex GST)
Fluoride Sensor, Replacement Sensor with 0.3 mL Direct Measurement
AUD 227.70(Ex GST)
Boss Head Clamp for Lab Stands, Powder Coated, Heavy-Duty
From AUD 6.50 (Ex GST)
You May Also Need
12 V DC Electric Kinetic Theory Model Apparatus
AUD 356.50(Ex GST)
Density Cubes, 2 cm Spare Cubes for Density Experiments
From AUD 3.50 (Ex GST)
Dynamics Carts, Laboratory Collision and Motion Kit
From AUD 179.50 (Ex GST)
Large Demonstration Manometer, ±300 mm Range
AUD 156.90(Ex GST)
Mini Electric Circular Motion Kit with Speed Control
AUD 211.90(Ex GST)
Mini Projectile Launcher, Student Mechanics Experiment with Protractor
AUD 136.90(Ex GST)
PSSC 2D Collision Dynamics Practical Kit
AUD 51.50(Ex GST)
PSSC Helical Steel Spring Kit
AUD 87.50(Ex GST)
PSSC Inertial Balance Experiment Kit
AUD 77.50(Ex GST)
Scale Pans with Hooks, Laboratory Weighing Unit
From AUD 7.90 (Ex GST)
Steel Ball Set, 3 Sizes, 20 Balls per Size
AUD 42.50(Ex GST)
Tensile Testing Machine for Strength of Materials Experiments
AUD 389.50(Ex GST)
[porto_related_products_slider]
FEATURED PRODUCTS
BEST SELLING PRODUCTS
Reagent Bottles, Wide Mouth, HDPE, Chemical-Resistant, Highly Reliable & Durable - Each
From AUD 1.50 (Ex GST)
Petri Dishes, Polypropylene, Autoclavable & Reusable, High Quality
From AUD 1.20 (Ex GST)
Glass Petri Dishes with Lid, Autoclavable, Borosilicate Glass (BORO 3.3)
From AUD 3.90 (Ex GST)
LATEST PRODUCTS
Brass Slotted Weights, Individual, 5 g to 100 g
From AUD 4.90 (Ex GST)
Density Cube Set, 1.0 cm Edge, Set of 6 in Plastic Box
AUD 18.90(Ex GST)
Density Cube Sets, 5 Cubes, 2.0 cm and 2.5 cm
From AUD 37.50 (Ex GST)
TOP RATED PRODUCTS
Brass Slotted Weights, Individual, 5 g to 100 g
From AUD 4.90 (Ex GST)
Density Cube Set, 1.0 cm Edge, Set of 6 in Plastic Box
AUD 18.90(Ex GST)
Density Cube Sets, 5 Cubes, 2.0 cm and 2.5 cm
From AUD 37.50 (Ex GST)
What Our Customers Say
⭐⭐⭐⭐⭐
We ordered a set of customised BORO 3.3 borosilicate glassware for our teaching labs, and LabChoice Australia exceeded every expectation. From the first consultation to final delivery, their team listened carefully, offered expert advice, and ensured every piece matched our specifications perfectly.
The clarity and precision of the glassware are exceptional, and the quick turnaround made setup effortless. It’s refreshing to work with an Australian supplier who genuinely understands laboratory needs and takes pride in quality craftsmanship. We’ll definitely be returning to LabChoice for future glassware requirements
⭐⭐⭐⭐⭐
Our lab required high-precision BORO 3.3 glassware for analytical testing, and LabChoice Australia delivered outstanding results. The ordering process was simple, communication was clear, and every beaker and flask arrived perfectly calibrated and ready for use.
The quality of the glass is exceptional — resistant to heat, easy to clean, and consistently accurate in measurement. It’s reassuring to know there’s an Australian supplier that combines scientific precision with genuine customer care. I’d recommend LabChoice to any research team looking for dependable labware
⭐⭐⭐⭐⭐
We needed a set of customised borosilicate glassware for a specialised project, and LabChoice Australia delivered exactly what we envisioned. The team worked closely with us from design to production, ensuring every detail met our specifications. The craftsmanship is exceptional, and the turnaround time was impressive. It’s reassuring to know we can rely on them for unique, made-to-order pieces
⭐⭐⭐⭐⭐
LabChoice Australia has completely changed the way we source our lab glassware. The quality is consistently top-notch, and every piece meets the precision we need for reliable results. Their team knows their stuff, answers our questions quickly, and always goes the extra mile to help — they’re more like partners than just a supplier.
⭐⭐⭐⭐⭐
We trust LabChoice Australia because they deliver every time. Their borosilicate glassware is durable, accurate, and perfect for the high-heat work we do. Everything arrives well-packed with clear specs, so there are never surprises. It’s reassuring to deal with a supplier who understands both compliance and the demands of a busy lab