E
x
p
l
o
r
e
M
o
r
e
:
Heat & Light
Light Box with Collimating Lens and Slit Formers
$89.90(Ex GST)
$89.90(Ex GST)
- Light box only for basic optics and colour blending experiments
- Supplied with collimating lens and set of 3 slit formers
- Full optical kit is not included
- Designed for use with a 12 V × 30 W QI lamp
- Lamp socket allows one light box to be plugged into another compatible unit
- Stackable banana plugs are moulded to the cables
- Lens adjuster is designed so students cannot remove it
- Built for classroom handling in school optics practicals
- Suitable for reflection, refraction, ray tracing and colour blending demonstrations
- Confirm lamp inclusion, power supply requirement and accessory compatibility before use
[request_quote_button]
- Description
- Datasheets & Manuals
Description
The Light Box with Collimating Lens and Slit Formers, also known as a classroom optics light box, is designed for basic optics and colour blending experiments in school science and physics teaching environments. This product is supplied as the light box only with a collimating lens and a set of 3 slit formers. The full optical kit is not included, making this option suitable for replacement, expansion or use with existing compatible optics accessories.
The light box supports a wide range of basic optics activities, including ray tracing, reflection, refraction, lens demonstrations, prism work and colour blending when used with suitable accessories and approved classroom methods. The unit is designed to take a 12 V × 30 W QI lamp. Users should confirm lamp inclusion, lamp compatibility and power supply requirements before purchase or classroom setup. The lamp socket design allows one compatible light box to be plugged into another, supporting paired or extended classroom demonstrations where two boxes need to run together. The banana plugs on the cables are stackable and moulded to the cable for practical student use.
The lens adjuster is designed so it cannot be removed by students, helping reduce lost parts and supporting longer service life in busy teaching laboratories. The light box is designed to withstand normal student handling during supervised classroom practicals. Compatible optical parts and accessories are available separately where required. This item is supplied as the light box with collimating lens and 3 slit formers only. Full optics kit, mirrors, prisms, colour filters, lenses, power supply, lamp and additional accessories are not included unless specified separately.
LabChoice Australia supplies Light Boxes with Collimating Lens and Slit Formers for school science laboratories, physics classrooms, optics teaching spaces and general education laboratories requiring practical apparatus for light, ray and colour experiments.
Datasheets & Manuals
Document :
Product Information Sheet(Pdf)
Individual Mineral Specimens For Display
From $27.50 (Ex GST)
Circuit Board Kit, Worcester Type Full Kit
$171.90(Ex GST)
Capacitor Box, Decade Capacitance Type
From $183.50 (Ex GST)
Medium Orbital Shaker Analogue
$2,062.00(Ex GST)
PTFE Oval Stir Bars, For Round Bottom Flasks, L10 to L40 Sizes
From $4.50 (Ex GST)
Petri Dish 90 mm Polystyrene, Aseptic - Pack of 500 Pcs
From $137.50 (Ex GST)
10-Level Conductivity Tester
$52.50(Ex GST)
LCD Digital Tube Rotator with 8-Place 50 mL Tube Holder Disk
$1,265.50(Ex GST)
You May Also Need
Bonded Compound Bar for Thermal Expansion
From $9.90 (Ex GST)
Cast Iron Bar Breaker Apparatus
From $225.50 (Ex GST)
Classic Mechanical Equivalent of Heat (J) Apparatus
$530.90(Ex GST)
Copper Calorimeter Cups, Nickel Plated, 50 × 75 mm and 75 × 100 mm
From $26.50 (Ex GST)
Flat Glass Plates Set of 6 for Interference Experiments
$59.90(Ex GST)
High Power QI Light Source, 12 V × 100 W
$224.50(Ex GST)
Hodson Light Box and Optical Set, 12 V
From $190.50 (Ex GST)
Holographic Diffraction Gratings
From $12.50 (Ex GST)
Hot/Cold Thermopile on Heat Sink with Socket Terminals
$123.50(Ex GST)
Simple Copper–Constantan Thermocouple, 200 mm Length
$9.90(Ex GST)
Spectrum Tube EHV Unit and Tube Support, Without Tubes
$422.50(Ex GST)
Thermal Conductivity Ring Set, 4 Different Metals
$51.50(Ex GST)
Wooden V-Groove Lens and Mirror Holders, 50 mm and 75 mm
From $6.90 (Ex GST)
[porto_related_products_slider]
FEATURED PRODUCTS
BEST SELLING PRODUCTS
Glass Petri Dishes with Lid, Autoclavable, Borosilicate Glass (BORO 3.3)
From $3.90 (Ex GST)
Polypropylene Filter Funnels, 50 mm to 150 mm Range
From $1.50 (Ex GST)
LATEST PRODUCTS
Newton’s Colour Disc, 23 cm, Hand Driven on Stand
$87.50(Ex GST)
Polaroid Filter Pair with Circular Scale, 100 × 100 mm
$68.50(Ex GST)
Polaroid Filter Pair with 90° Rotating Disc
$103.50(Ex GST)
TOP RATED PRODUCTS
Newton’s Colour Disc, 23 cm, Hand Driven on Stand
$87.50(Ex GST)
Polaroid Filter Pair with Circular Scale, 100 × 100 mm
$68.50(Ex GST)
Polaroid Filter Pair with 90° Rotating Disc
$103.50(Ex GST)
What Our Customers Say
⭐⭐⭐⭐⭐
We ordered a set of customised BORO 3.3 borosilicate glassware for our teaching labs, and LabChoice Australia exceeded every expectation. From the first consultation to final delivery, their team listened carefully, offered expert advice, and ensured every piece matched our specifications perfectly.
The clarity and precision of the glassware are exceptional, and the quick turnaround made setup effortless. It’s refreshing to work with an Australian supplier who genuinely understands laboratory needs and takes pride in quality craftsmanship. We’ll definitely be returning to LabChoice for future glassware requirements
⭐⭐⭐⭐⭐
Our lab required high-precision BORO 3.3 glassware for analytical testing, and LabChoice Australia delivered outstanding results. The ordering process was simple, communication was clear, and every beaker and flask arrived perfectly calibrated and ready for use.
The quality of the glass is exceptional — resistant to heat, easy to clean, and consistently accurate in measurement. It’s reassuring to know there’s an Australian supplier that combines scientific precision with genuine customer care. I’d recommend LabChoice to any research team looking for dependable labware
⭐⭐⭐⭐⭐
We needed a set of customised borosilicate glassware for a specialised project, and LabChoice Australia delivered exactly what we envisioned. The team worked closely with us from design to production, ensuring every detail met our specifications. The craftsmanship is exceptional, and the turnaround time was impressive. It’s reassuring to know we can rely on them for unique, made-to-order pieces
⭐⭐⭐⭐⭐
LabChoice Australia has completely changed the way we source our lab glassware. The quality is consistently top-notch, and every piece meets the precision we need for reliable results. Their team knows their stuff, answers our questions quickly, and always goes the extra mile to help — they’re more like partners than just a supplier.
⭐⭐⭐⭐⭐
We trust LabChoice Australia because they deliver every time. Their borosilicate glassware is durable, accurate, and perfect for the high-heat work we do. Everything arrives well-packed with clear specs, so there are never surprises. It’s reassuring to deal with a supplier who understands both compliance and the demands of a busy lab