E
x
p
l
o
r
e
M
o
r
e
:
Heat & Light
Laboratory Light Sources
From $12.50 (Ex GST)
From $12.50 (Ex GST)
- Low power MES light sources for basic electricity teaching, 2.5 V lamp in screw socket format
- Connection options include two wire leads, 4 mm sockets, or 4 mm spin free IEC terminals depending on model
- Enclosed low power versions housed in a transparent plastic vial for protection during student handling
- High power option uses 12 V BA15d bayonet lamp, typically 15 to 21 W, base with 4 mm terminals
- Very high power 12 V 100 W quartz halogen in ventilated metal housing, shutters, stand mount rod and 1 m lead
[request_quote_button]
- Description
Description
Teaching light sources ranging from low power 2.5 V MES lamp assemblies on a plastic base to enclosed versions in a transparent protective vial, with connection options by wires, 4 mm sockets, or 4 mm spin free terminals. High power options include a 12 V BA15d lamp on a base with 4 mm spin free terminals, and a very high power 12 V 100 W quartz halogen light source in a ventilated metal housing with selectable viewing holes, shutters, support rod mounting, and a 1 m cable with stackable banana plugs.
Simple light source used for teaching basic electricity. Uses an MES lamp screwed into a plastic base with wires connected.
Simple high quality light source used for teaching basic electricity. Uses an MES lamp screwed into a plastic base with 2 x 4 mm sockets for connection. Listed as a component of the IEC electricity kit.
Simple low power light source in a protective housing for teaching basic electricity. Housed in a transparent plastic vial and uses an MES lamp screwed into a socket. This version uses 4 mm sockets for connection, as noted for HL2012-001.
Simple low power light source in a protective housing for teaching basic electricity. Housed in a transparent plastic vial and uses an MES lamp screwed into a socket. This version uses 4 mm spin free IEC terminals for cable connection, as noted for HL2012-101.
Simple high power light source consisting of a small bayonet socket mounted to a base. Lamp normally used is a double contact 12 V and 15 to 21 W lamp. Base fitted with 4 mm spin free IEC terminals.
Very high power light source mounted inside a metal housing with viewing holes on two sides and shutters to select the desired viewing hole. Lamp is 12 V x 100 W quartz halogen and generates considerable heat. Housing is ventilated to allow air flow through without light escaping. Strong support rod provided for mounting on a retort stand with a boss head. Supplied with a 1 m cable terminated with moulded stackable banana plugs.
Polycarbonate Erlenmeyer Flask Baffled Bottom, Sterile
From $116.50 (Ex GST)
West Condenser BORO 3.3 for Efficient Reflux Cooling
From $44.90 (Ex GST)
Digital Dry Block Heater, Four Block, 200°C
$1,844.00(Ex GST)
PETG Media Bottle with Cap, Non-Sterile
From $419.50 (Ex GST)
Porcelain Streak Plates, Unglazed Mineral Testing Tile Range, White & Black
From $17.50 (Ex GST)
Banana Plugs, 4mm Laboratory Type
From $14.50 (Ex GST)
Bottle Top Dispenser Without Recirculation Valve
From $481.50 (Ex GST)
You May Also Need
3-Piece 90° Corner Mirror Set, 120 mm Side Length
$22.50(Ex GST)
Bonded Compound Bar for Thermal Expansion
From $9.90 (Ex GST)
Calorimeter Heating Blocks, Educational Metal Block Set for Heat Studies
From $62.50 (Ex GST)
Conductometer Heat Conduction Apparatus
$24.90(Ex GST)
Hodson Optical Bench and Lens Kit
From $247.90 (Ex GST)
Immersion Heater, 12 V 50 W for Calorimeter Blocks
$62.50(Ex GST)
Laser View Prism and Bar Kits
From $103.50 (Ex GST)
Polaroid Polarising Filters
From $22.50 (Ex GST)
Round Biconcave Lenses, Unmounted Diverging Lens Teaching Range
From $3.50 (Ex GST)
Simple Copper–Constantan Thermocouple, 200 mm Length
$9.90(Ex GST)
Two Metal Laminated Strip Compound Bar
$16.50(Ex GST)
[porto_related_products_slider]
FEATURED PRODUCTS
BEST SELLING PRODUCTS
Glass Petri Dishes with Lid, Autoclavable, Borosilicate Glass (BORO 3.3)
From $3.90 (Ex GST)
Polypropylene Filter Funnels, 50 mm to 150 mm Range
From $1.50 (Ex GST)
LATEST PRODUCTS
Pocket Twin Folding Magnifier, 6x + 6x, 12x
$6.90(Ex GST)
Folding Linen Tester Magnifier, 5.5×, 30 mm
$12.50(Ex GST)
Joule’s Calorimeter Assembly with 2 Ohm Heating Coil
$69.90(Ex GST)
TOP RATED PRODUCTS
Pocket Twin Folding Magnifier, 6x + 6x, 12x
$6.90(Ex GST)
Folding Linen Tester Magnifier, 5.5×, 30 mm
$12.50(Ex GST)
Joule’s Calorimeter Assembly with 2 Ohm Heating Coil
$69.90(Ex GST)
What Our Customers Say
⭐⭐⭐⭐⭐
We ordered a set of customised BORO 3.3 borosilicate glassware for our teaching labs, and LabChoice Australia exceeded every expectation. From the first consultation to final delivery, their team listened carefully, offered expert advice, and ensured every piece matched our specifications perfectly.
The clarity and precision of the glassware are exceptional, and the quick turnaround made setup effortless. It’s refreshing to work with an Australian supplier who genuinely understands laboratory needs and takes pride in quality craftsmanship. We’ll definitely be returning to LabChoice for future glassware requirements
⭐⭐⭐⭐⭐
Our lab required high-precision BORO 3.3 glassware for analytical testing, and LabChoice Australia delivered outstanding results. The ordering process was simple, communication was clear, and every beaker and flask arrived perfectly calibrated and ready for use.
The quality of the glass is exceptional — resistant to heat, easy to clean, and consistently accurate in measurement. It’s reassuring to know there’s an Australian supplier that combines scientific precision with genuine customer care. I’d recommend LabChoice to any research team looking for dependable labware
⭐⭐⭐⭐⭐
We needed a set of customised borosilicate glassware for a specialised project, and LabChoice Australia delivered exactly what we envisioned. The team worked closely with us from design to production, ensuring every detail met our specifications. The craftsmanship is exceptional, and the turnaround time was impressive. It’s reassuring to know we can rely on them for unique, made-to-order pieces
⭐⭐⭐⭐⭐
LabChoice Australia has completely changed the way we source our lab glassware. The quality is consistently top-notch, and every piece meets the precision we need for reliable results. Their team knows their stuff, answers our questions quickly, and always goes the extra mile to help — they’re more like partners than just a supplier.
⭐⭐⭐⭐⭐
We trust LabChoice Australia because they deliver every time. Their borosilicate glassware is durable, accurate, and perfect for the high-heat work we do. Everything arrives well-packed with clear specs, so there are never surprises. It’s reassuring to deal with a supplier who understands both compliance and the demands of a busy lab
