Explore: Heat & Light
Bell Jar with Ground Glass Stopper, Laboratory Vacuum Apparatus Type
$50.00(Ex GST)
• Clear soda glass bell jar with ground-in glass stopper, for vacuum and demonstration vessel setups.
• Size 250 mm high × 150 mm diameter, overall 280 mm height with stopper fitted.
• Stopper No. 29 supplied, ground fit supports sealing point for vacuum-related experiments.
• Plate not included, designed to be used with a compatible vacuum plate or base surface.
• Laboratory or educational use only, handle glass carefully and use under appropriate supervision.
- Description
Description
This clear glass bell jar is designed for vacuum and demonstration setups where a sealed vessel is required. It is made from soda glass and supplied with a ground-in glass stopper, providing a close-fitting seal point for vacuum-related experiments and classic physics demonstrations.
Jar size is 250 mm high × 150 mm diameter. Overall height is 280 mm with the stopper fitted. Stopper size is No. 29. Plate is not included.
Our products are for use in laboratory or educational settings only. Use under appropriate supervision.
FAQs
Q: What material is the bell jar made from?
A: Soda glass.
Q: What is included with the bell jar?
A: A ground-in glass stopper.
Q: Is a base plate included?
A: No, plate is not included.
Q: What are the dimensions?
A: 250 mm height × 150 mm diameter, 280 mm overall height with stopper in.
Q: What stopper size is supplied?
A: Stopper No. 29.
Similar Products
Distilling Flask with Side Arm, BORO 3.3 Glass
From $15.90 (Ex GST)
Laboratory Amplifiers
From $96.00 (Ex GST)
Recording Timers with Kit, 50 Dots/sec AC or 25/50 Hz Electronic DC, 8 to 12V Power
From $86.00 (Ex GST)
Alnico Bar Magnet Pairs with Keepers, Permanent Magnet Demonstration Range
From $9.00 (Ex GST)
Reusable Silicone Beaker Covers, XSmall to Large, Pack of 10
From $18.00 (Ex GST)
Glass Low Form Beaker BORO 3.3 Size 5 ML – 10 Pcs/Box
$20.00(Ex GST)
Timers and Counters
From $269.40 (Ex GST)
Geiger Counter, Digital Radiation Monitor
From $56.00 (Ex GST)
Bonded Compound Bar for Thermal Expansion
From $8.00 (Ex GST)
Calorimeter Cups and Calorimetry Accessories of Copper
From $9.00 (Ex GST)
Cast Iron Bar Breaker Apparatus
From $181.00 (Ex GST)
Classic Mechanical Equivalent of Heat (J) Apparatus
$435.00(Ex GST)
Cylindrical Lenses, Plano Concave and Plano Convex Optics
From $24.00 (Ex GST)
Flat Glass Plates Set of 6 for Interference Experiments
$48.00(Ex GST)
Hot/Cold Thermopile on Heat Sink with Socket Terminals
$99.00(Ex GST)
Laboratory Light Sources
From $10.00 (Ex GST)
Lens and Mirror Holders and Lens Paper
From $5.50 (Ex GST)
Polaroid Polarising Filters
From $18.00 (Ex GST)
Simple Copper–Constantan Thermocouple, 200 mm Length
$8.00(Ex GST)
Spectrum Discharge Tube Set
From $209.00 (Ex GST)
Thermal Conductivity Ring Set, 4 Different Metals
$41.00(Ex GST)
Two Metal Laminated Strip Compound Bar
$13.00(Ex GST)
[porto_related_products_slider]
FEATURED PRODUCTS
BEST SELLING PRODUCTS
Polypropylene Filter Funnels, Gravity Filtration Range
From $1.00 (Ex GST)
Glass Petri Dishes with Lid, Autoclavable, Borosilicate Glass (BORO 3.3)
From $3.90 (Ex GST)
LATEST PRODUCTS
Digital Orbital Shaker
From $3,080.00 (Ex GST)
Block for Falcon Tubes
From $255.00 (Ex GST)
Block for Epp Tubes (Dry Block Heater)
From $255.00 (Ex GST)
TOP RATED PRODUCTS
Digital Orbital Shaker
From $3,080.00 (Ex GST)
Block for Falcon Tubes
From $255.00 (Ex GST)
Block for Epp Tubes (Dry Block Heater)
From $255.00 (Ex GST)
What Our Customers Say
⭐⭐⭐⭐⭐
We ordered a set of customised BORO 3.3 borosilicate glassware for our teaching labs, and LabChoice Australia exceeded every expectation. From the first consultation to final delivery, their team listened carefully, offered expert advice, and ensured every piece matched our specifications perfectly.
The clarity and precision of the glassware are exceptional, and the quick turnaround made setup effortless. It’s refreshing to work with an Australian supplier who genuinely understands laboratory needs and takes pride in quality craftsmanship. We’ll definitely be returning to LabChoice for future glassware requirements
⭐⭐⭐⭐⭐
Our lab required high-precision BORO 3.3 glassware for analytical testing, and LabChoice Australia delivered outstanding results. The ordering process was simple, communication was clear, and every beaker and flask arrived perfectly calibrated and ready for use.
The quality of the glass is exceptional — resistant to heat, easy to clean, and consistently accurate in measurement. It’s reassuring to know there’s an Australian supplier that combines scientific precision with genuine customer care. I’d recommend LabChoice to any research team looking for dependable labware
⭐⭐⭐⭐⭐
We needed a set of customised borosilicate glassware for a specialised project, and LabChoice Australia delivered exactly what we envisioned. The team worked closely with us from design to production, ensuring every detail met our specifications. The craftsmanship is exceptional, and the turnaround time was impressive. It’s reassuring to know we can rely on them for unique, made-to-order pieces
⭐⭐⭐⭐⭐
LabChoice Australia has completely changed the way we source our lab glassware. The quality is consistently top-notch, and every piece meets the precision we need for reliable results. Their team knows their stuff, answers our questions quickly, and always goes the extra mile to help — they’re more like partners than just a supplier.
⭐⭐⭐⭐⭐
We trust LabChoice Australia because they deliver every time. Their borosilicate glassware is durable, accurate, and perfect for the high-heat work we do. Everything arrives well-packed with clear specs, so there are never surprises. It’s reassuring to deal with a supplier who understands both compliance and the demands of a busy lab