LCD Digital Horizontal Tube Rotator with 16-Place 50 mL Vertical Tube Holder
$2,098.50(Ex GST)
- LCD displays speed and operating time for clear monitoring during use
- Adjustable speed range from 10 to 70 rpm supports controlled tube rotation
- Continuous 360° horizontal rotation provides gentle but effective sample mixing
- Adjustable 0° to 90° tilt angle supports different tube mixing orientations
- Continuous and timed operating modes suit routine and scheduled workflows
- Brushless DC motor supports extended operation and longer service life
- Compatible with disk and rotisserie accessories for 1.5 mL and 50 mL centrifuge tubes
See more:
Accessories
- Description
Description
The LCD Digital Horizontal Tube Rotator, also known as a horizontal rotating mixer, provides gentle and continuous 360° movement for samples held in compatible sealed centrifuge tubes. Its controlled rolling and rotating action supports laboratory procedures that require consistent mixing without the vigorous agitation associated with high-speed vortex mixing.
The adjustable speed range from 10 to 70 rpm allows the operator to select a suitable rotation rate according to the tube size, sample characteristics and laboratory protocol. Speed and operating time are shown on the LCD, providing clear monitoring and supporting more consistent operation during routine sample preparation.
An adjustable tilt angle from 0° to 90° allows the rotisserie position to be configured for different mixing orientations. This flexibility helps laboratories adapt the instrument to procedures requiring horizontal rolling, angled rotation or continuous end-over-end sample movement.
The rotator can operate continuously or with a programmed timer from 1 to 1199 minutes. These operating modes support both extended mixing procedures and defined processing periods. The brushless DC motor is designed for reliable extended use and reduced routine motor maintenance.
A wide range of disk and rotisserie accessories is available, including holder configurations for 1.5 mL and 50 mL centrifuge tubes. The unit can also be used in cold rooms or incubators within its specified operating range of 5 to 40°C and up to 80% relative humidity, supporting temperature-controlled laboratory workflows.
LabChoice Australia supplies this LCD Digital Horizontal Tube Rotator for biotechnology, molecular biology, biochemistry, clinical research, pathology, pharmaceutical, university, educational and general life-science laboratories. It is suitable for gentle tube mixing, maintaining suspended materials in motion, blending laboratory samples and supporting preparation procedures where controlled horizontal rotation is required.
| Specification | Details |
|---|---|
| Accessories type | Rotisserie Accessory |
| Tilt angle | 0-90° |
| Motion type | Rotator |
| Rotation angle | 360° |
| Speed range | 10-70 rpm |
| Speed display | LCD |
| Timer display | LCD |
| Time setting range | 1-1199 min |
| Run type | Continuous / timer |
| Motor type | Brushless DC motor |
| Voltage | 100-240V |
| Frequency | 50/60Hz |
| Power | 40 W |
| Dimension [D×W×H] | 220×510×260 mm |
| Permissible ambient temperature | 5-40℃ |
| Permissible ambient humidity | 80% RH |
| Protection class | IP21 |
Frequently Bought Together
Adjustable Speed Tube Rotator for Laboratory Sample Mixing
Short Deck Single Layer Rocking Tube Rotator Brushless DC Motor
$496.50(Ex GST)
Variable Speed LCD Digital Tube Roller, 6-Roller Type
$1,049.50(Ex GST)
Long Deck Double Layer Rocking Tube Rotator Brushless DC Motor
$612.50(Ex GST)
Tube Rotator for Sample Blood mixing, 0 to 80rpm
$612.50(Ex GST)
Long Deck Single Layer Rocking Tube Rotator Brushless DC Motor
$554.50(Ex GST)
LCD Digital Tube Rotator with 8-Place 50 mL Tube Holder Disk
$1,806.50(Ex GST)
Kipps Gas Generator Apparatus, Polyethylene
From $59.90 (Ex GST)
Litmus Test Paper Strips, Acid/Base Indicator Type
From $6.90 (Ex GST)
Human Sense Organs Teaching Models For Classroom
From $83.50 (Ex GST)
Scintillation Vial (Sample Vial), BORO 3.3
From $221.50 (Ex GST)
Polypropylene Carboys with Caps, Sterile - Each
From $196.50 (Ex GST)
Physics Demonstration Balls, Happy and Unhappy Bounce Pair or Floating Density Ball
From $21.50 (Ex GST)
Dual Range Student Ammeter, AC and DC Classroom Current Measurement Type
From $43.90 (Ex GST)
Similar Products
Digital Dry Block Heater with Microprocessor Control, 200°C with LED Display
From $1,382.00 (Ex GST)
Digital Laboratory Water bath, 7 L to 50 L with PID Temperature Control
From $2,067.00 (Ex GST)
Humidity Measurement Instruments For Laboratory
From $12.50 (Ex GST)
Hybridisation Oven Platform
From $1,366.00 (Ex GST)
Immersion Cooler
$5,749.00(Ex GST)
Laboratory Water Bath with Hot Plate
From $236.90 (Ex GST)
Medium Reciprocating Shaker
$3,640.00(Ex GST)
Mini Roller Mixers, Standard Tube and Bottle Laboratory Type
From $2,070.00 (Ex GST)
Recirculating Cooler with Tank
$8,262.00(Ex GST)
Rotary Tube Mixer with Disc
$1,439.00(Ex GST)
Simmerstat Hot Plates
From $580.90 (Ex GST)
Vernier Calipers For Laboratory and Educational Work
From $9.90 (Ex GST)
[porto_related_products_slider]
FEATURED PRODUCTS
BEST SELLING PRODUCTS
Polypropylene Filter Funnels, Gravity Filtration Range
From $1.50 (Ex GST)
Glass Petri Dishes with Lid, Autoclavable, Borosilicate Glass (BORO 3.3)
From $3.90 (Ex GST)
TOP RATED PRODUCTS
What Our Customers Say
⭐⭐⭐⭐⭐
We ordered a set of customised BORO 3.3 borosilicate glassware for our teaching labs, and LabChoice Australia exceeded every expectation. From the first consultation to final delivery, their team listened carefully, offered expert advice, and ensured every piece matched our specifications perfectly.
The clarity and precision of the glassware are exceptional, and the quick turnaround made setup effortless. It’s refreshing to work with an Australian supplier who genuinely understands laboratory needs and takes pride in quality craftsmanship. We’ll definitely be returning to LabChoice for future glassware requirements
⭐⭐⭐⭐⭐
Our lab required high-precision BORO 3.3 glassware for analytical testing, and LabChoice Australia delivered outstanding results. The ordering process was simple, communication was clear, and every beaker and flask arrived perfectly calibrated and ready for use.
The quality of the glass is exceptional — resistant to heat, easy to clean, and consistently accurate in measurement. It’s reassuring to know there’s an Australian supplier that combines scientific precision with genuine customer care. I’d recommend LabChoice to any research team looking for dependable labware
⭐⭐⭐⭐⭐
We needed a set of customised borosilicate glassware for a specialised project, and LabChoice Australia delivered exactly what we envisioned. The team worked closely with us from design to production, ensuring every detail met our specifications. The craftsmanship is exceptional, and the turnaround time was impressive. It’s reassuring to know we can rely on them for unique, made-to-order pieces
⭐⭐⭐⭐⭐
LabChoice Australia has completely changed the way we source our lab glassware. The quality is consistently top-notch, and every piece meets the precision we need for reliable results. Their team knows their stuff, answers our questions quickly, and always goes the extra mile to help — they’re more like partners than just a supplier.
⭐⭐⭐⭐⭐
We trust LabChoice Australia because they deliver every time. Their borosilicate glassware is durable, accurate, and perfect for the high-heat work we do. Everything arrives well-packed with clear specs, so there are never surprises. It’s reassuring to deal with a supplier who understands both compliance and the demands of a busy lab
