Explore More: Laboratory Equipment
Stainless Steel Lid, SWB20 Bath Cover
- Stainless steel lid suits SWB20 and SWB20D water bath applications
- Designed for waterbaths running at temperatures over 50°C during use
- Stainless steel material offers a higher rate of condensation in use
- Gabled lid design ensures maximum condensation run-off back into bath
- Assists in reducing water loss from the bath due to evaporation
- Side wall height is 100 mm, with highest lid point listed at 170 mm
- Description
Description
Stainless Steel lid for SWB20 series is used with SWB20 and SWB20D water baths operating at temperatures over 50°C, assisting with reduced water loss due to evaporation and condensation run-off back into the bath.
Stainless Steel lid for SWB20 series is designed to suit SWB20 and SWB20D water baths. The gabled stainless steel lid is intended for use in waterbaths running at temperatures over 50°C.
The stainless steel material offers a higher rate of condensation, and using this lid with the waterbath assists in reducing water loss due to evaporation.
The gabled design ensures maximum condensation run-off back into the bath. The lid has a side wall height of 100 mm and the highest point in the lid is 170 mm.
Also known as a high temperature lid, water bath lid, water tank lid, or gabled lid.
Specifications
- Product type: Stainless steel lid
- Suitability: SWB20 and SWB20D water baths
- Temperature use: Bath temperatures over 50°C
- Material: Stainless steel
- Design: Gabled lid
- Side wall height: 100 mm
- Highest point in lid: 170 mm
- Also known as: High temperature lid, water bath lid, water tank lid, gabled lid
Similar Products
Polystyrene Weighing Boats, Non Graduated Laboratory Transfer Range
From $11.00 (Ex GST)
Simple Heating Mantles, Controlled Heating for Round Bottom Flasks
From $255.00 (Ex GST)
Rock Mineral and Fossil Study Kits with Hardness Testing Set
From $38.00 (Ex GST)
Test Tube Racks, Polypropylene 24 Hole Laboratory Type
From $7.00 (Ex GST)
ORP Sensor, Replacement Sensor for Pocket ORP Meter
$143.00(Ex GST)
10 Roller Tube Mixer
From $2,589.00 (Ex GST)
Block for Cuvettes
$392.00(Ex GST)
Digital Orbital Shaker
From $3,080.00 (Ex GST)
Humidity Measurement Instruments For Laboratory
From $10.00 (Ex GST)
Laboratory Dry Bath Incubator
$800.00(Ex GST)
Laboratory Hot Plate, Controlled Surface Heating Type
From $390.00 (Ex GST)
Manual and Bench Centrifuges with Spare Tube Parts
From $2.00 (Ex GST)
Multi Tube Vortex Mixer
$3,958.00(Ex GST)
Orbital Shaking Incubator
From $6,639.00 (Ex GST)
Recirculating Cooler with Tank
$8,262.00(Ex GST)
Round Block with Holes For Tubes
From $227.00 (Ex GST)
Vernier Calipers For Laboratory and Educational Work
From $8.00 (Ex GST)
[porto_related_products_slider]
FEATURED PRODUCTS
BEST SELLING PRODUCTS
Polypropylene Filter Funnels, Gravity Filtration Range
From $1.00 (Ex GST)
Glass Petri Dishes with Lid, Autoclavable, Borosilicate Glass (BORO 3.3)
From $3.90 (Ex GST)
Boss Head Clamp for Lab Stands, Powder Coated, Heavy-Duty
From $6.50 (Ex GST)
What Our Customers Say
⭐⭐⭐⭐⭐
We ordered a set of customised BORO 3.3 borosilicate glassware for our teaching labs, and LabChoice Australia exceeded every expectation. From the first consultation to final delivery, their team listened carefully, offered expert advice, and ensured every piece matched our specifications perfectly.
The clarity and precision of the glassware are exceptional, and the quick turnaround made setup effortless. It’s refreshing to work with an Australian supplier who genuinely understands laboratory needs and takes pride in quality craftsmanship. We’ll definitely be returning to LabChoice for future glassware requirements
⭐⭐⭐⭐⭐
Our lab required high-precision BORO 3.3 glassware for analytical testing, and LabChoice Australia delivered outstanding results. The ordering process was simple, communication was clear, and every beaker and flask arrived perfectly calibrated and ready for use.
The quality of the glass is exceptional — resistant to heat, easy to clean, and consistently accurate in measurement. It’s reassuring to know there’s an Australian supplier that combines scientific precision with genuine customer care. I’d recommend LabChoice to any research team looking for dependable labware
⭐⭐⭐⭐⭐
We needed a set of customised borosilicate glassware for a specialised project, and LabChoice Australia delivered exactly what we envisioned. The team worked closely with us from design to production, ensuring every detail met our specifications. The craftsmanship is exceptional, and the turnaround time was impressive. It’s reassuring to know we can rely on them for unique, made-to-order pieces
⭐⭐⭐⭐⭐
LabChoice Australia has completely changed the way we source our lab glassware. The quality is consistently top-notch, and every piece meets the precision we need for reliable results. Their team knows their stuff, answers our questions quickly, and always goes the extra mile to help — they’re more like partners than just a supplier.
⭐⭐⭐⭐⭐
We trust LabChoice Australia because they deliver every time. Their borosilicate glassware is durable, accurate, and perfect for the high-heat work we do. Everything arrives well-packed with clear specs, so there are never surprises. It’s reassuring to deal with a supplier who understands both compliance and the demands of a busy lab