Hot/Cold Thermopile on Heat Sink with Socket Terminals
AUD 123.50(Ex GST)
AUD 123.50(Ex GST)
- Thermopile hot / cold apparatus for laboratory and educational use
- Demonstrates the Peltier effect using a thermo-generator cell
- Flat plate junction produces one hot side and one cold side when DC is applied
- Mounted on heat sink as listed
- Supplied with 2 × 4 mm sockets as listed
- Allows DC connection through standard laboratory leads
- Heating and cooling effect is visually and physically observable
- Ice may form on the cold side under suitable conditions as listed
- Useful for teaching thermoelectric effects and energy transfer
- Suitable for physics, heat and electricity demonstrations
- Requires compatible DC power supply
- Use under appropriate laboratory or educational supervision
[request_quote_button]
- Description
- Datasheets & Manuals
Description
The Hot/Cold Thermopile on Heat Sink with Socket Terminals, also known as a thermo-generator demonstration cell or Peltier effect apparatus, is designed for demonstrating thermoelectric heating and cooling. In this apparatus, DC current is applied to a flat thermoelectric junction plate. When current flows through the junctions, one side becomes hot while the opposite side becomes cold, providing a clear demonstration of the Peltier effect. The IEC thermo-generator is supplied with 2 × 4 mm sockets, allowing connection to a compatible DC power supply using standard laboratory leads.
The heating and cooling effect is very obvious during operation. Under suitable conditions, ice can form on the cold side, helping students observe practical thermoelectric cooling behaviour. This apparatus is useful for teaching thermoelectric effects, heat transfer, energy conversion, temperature difference, electrical input and practical cooling concepts. Users should confirm DC voltage, current limit, power supply compatibility, polarity requirements, heat sink condition and classroom demonstration procedure before use.
Do not exceed the approved electrical rating, reverse connections unless permitted by the experiment, operate without suitable heat dissipation or allow condensation water to enter electrical connections. The hot side may cause burns and the cold side may cause cold-contact discomfort or condensation. Handle only after the apparatus has stabilised and cooled to a safe temperature.
This product is intended for laboratory or educational settings only and should be used under appropriate supervision. This item is supplied as the selected thermopile hot / cold apparatus on heat sink with 4 mm sockets only. DC power supply, leads, thermometer, ice collection tray, worksheets, PPE and additional thermoelectric accessories are not included unless specified separately.
LabChoice Australia supplies Thermopile Hot / Cold Apparatus and thermoelectric teaching equipment for school science laboratories, university teaching laboratories and educational facilities requiring practical demonstrations of the Peltier effect and energy transfer.
Datasheets & Manuals
Document :
Product Information Sheet(Pdf)
Boss Head Clamp, Jumbo Heavy Duty for up to 25 mm Rod
AUD 36.90(Ex GST)
Student Spectrometry Kit, Light Spectrum Observation and Analysis Teaching Set
AUD 3,565.50(Ex GST)
Vacuum Pump Moisture Trap and Regulator for Rocker Pump Protection
From AUD 212.50 (Ex GST)
Magnetic Line Coloured Chips, 100 g Pack
AUD 80.90(Ex GST)
Glass Low Form Beaker BORO 3.3 Size 100 ML – 6 Pcs/Box
AUD 22.50(Ex GST)
Manual Hand-Operated Centrifuge, 4-Place Tube
AUD 87.50(Ex GST)
Laboratory Hot Plate with Simmerstat Temperature Control
AUD 580.90(Ex GST)
Biological Digestive System Model on Board, Life Size
AUD 236.90(Ex GST)
You May Also Need
Cast Iron Bar Breaker Apparatus
From AUD 225.50 (Ex GST)
Copper Calorimeter Cups, Nickel Plated, 50 × 75 mm and 75 × 100 mm
From AUD 26.50 (Ex GST)
Gravesande’s Brass Ball and Ring Apparatus
AUD 39.90(Ex GST)
Heat Conductivity Rods, 300 × 6 mm, Individual Metals and Set of 4
From AUD 12.50 (Ex GST)
Heat Conductometer on Handle for Thermal Conductivity
AUD 24.90(Ex GST)
High Power QI Light Source, 12 V × 100 W
AUD 224.50(Ex GST)
Holographic Diffraction Gratings
From AUD 12.50 (Ex GST)
Immersion Heater for Calorimeter Block Heating
AUD 62.50(Ex GST)
Mini Spectral Lamp Power Supply and Holder, Without Lamp
AUD 435.90(Ex GST)
Plastic Spectroscope with Calibration Scale and Adjustable Slit
AUD 68.50(Ex GST)
Polaroid Filter Pairs, 50 × 50 mm to 100 × 100 mm
From AUD 22.50 (Ex GST)
Simple Copper–Constantan Thermocouple for Temperature Measurement
AUD 9.90(Ex GST)
Thermal Conductivity Bars, Copper, Brass, Aluminium and Steel
AUD 34.90(Ex GST)
Three-Way Corner Mirror for Light Reflection Experiments
AUD 22.50(Ex GST)
Wooden V-Groove Lens and Mirror Holders, 50 mm and 75 mm
From AUD 6.90 (Ex GST)
[porto_related_products_slider]
Recently Viewed Products
SELECT OPTIONS
Erlenmeyer Jointed Conical Flask, BORO 3.3 Glass
From AUD 6.90 (Ex GST)
SELECT OPTIONS
Diamond Tip Pencil for Glass Writing
AUD 22.50(Ex GST)
SELECT OPTIONS
Boiling Flask, Round Bottom, Borosilicate Glass (BORO 3.3)
From AUD 2.60 (Ex GST)
SELECT OPTIONS
Kidney Anatomy Model, Bench Top Teaching Display on Stand
AUD 99.90(Ex GST)
FEATURED PRODUCTS
BEST SELLING PRODUCTS
Petri Dishes, Polypropylene, Autoclavable & Reusable, High Quality
From AUD 1.20 (Ex GST)
Stirring Rods, Rounded Ends, Laboratory Grade, Borosilicate Glass (BORO 3.3)
From AUD 0.95 (Ex GST)
Glass Petri Dishes with Lid, Autoclavable, Borosilicate Glass (BORO 3.3)
From AUD 3.90 (Ex GST)
TOP RATED PRODUCTS
What Our Customers Say
⭐⭐⭐⭐⭐
We ordered a set of customised BORO 3.3 borosilicate glassware for our teaching labs, and LabChoice Australia exceeded every expectation. From the first consultation to final delivery, their team listened carefully, offered expert advice, and ensured every piece matched our specifications perfectly.
The clarity and precision of the glassware are exceptional, and the quick turnaround made setup effortless. It’s refreshing to work with an Australian supplier who genuinely understands laboratory needs and takes pride in quality craftsmanship. We’ll definitely be returning to LabChoice for future glassware requirements
⭐⭐⭐⭐⭐
Our lab required high-precision BORO 3.3 glassware for analytical testing, and LabChoice Australia delivered outstanding results. The ordering process was simple, communication was clear, and every beaker and flask arrived perfectly calibrated and ready for use.
The quality of the glass is exceptional — resistant to heat, easy to clean, and consistently accurate in measurement. It’s reassuring to know there’s an Australian supplier that combines scientific precision with genuine customer care. I’d recommend LabChoice to any research team looking for dependable labware
⭐⭐⭐⭐⭐
We needed a set of customised borosilicate glassware for a specialised project, and LabChoice Australia delivered exactly what we envisioned. The team worked closely with us from design to production, ensuring every detail met our specifications. The craftsmanship is exceptional, and the turnaround time was impressive. It’s reassuring to know we can rely on them for unique, made-to-order pieces
⭐⭐⭐⭐⭐
LabChoice Australia has completely changed the way we source our lab glassware. The quality is consistently top-notch, and every piece meets the precision we need for reliable results. Their team knows their stuff, answers our questions quickly, and always goes the extra mile to help — they’re more like partners than just a supplier.
⭐⭐⭐⭐⭐
We trust LabChoice Australia because they deliver every time. Their borosilicate glassware is durable, accurate, and perfect for the high-heat work we do. Everything arrives well-packed with clear specs, so there are never surprises. It’s reassuring to deal with a supplier who understands both compliance and the demands of a busy lab