Laser View Kit and Part Sets for Optical Fibre
From AUD 103.50 (Ex GST)
From AUD 103.50 (Ex GST)
- Laser view kit for classroom optics and photonics demonstrations
- Specially moulded prisms and bars make a laser beam visible as it passes through the plastic
- Full set includes 8 parts
- Part set option includes 6 shaped optical pieces
- Bar-only option includes 2 bars
- Special prism shapes match the Hodson Light Box kit formats
- Straight and curved bars support optical fibre and internal reflection demonstrations
- Suitable for teaching light paths, refraction, internal reflection and photonics concepts
- Confirm laser source, classroom method and supervision requirements before use
[request_quote_button]
- Description
- Datasheets & Manuals
Description
The Laser View Kit and Part Sets, also known as laser ray optics demonstration pieces, are designed for school science and physics classrooms where students need to observe how a laser beam travels through transparent optical shapes. The kit uses specially moulded prisms and bars that allow a laser beam to be visible as it passes through the plastic. This makes it easier for students to follow the light path during optics demonstrations.
The special prism shapes are the same style as those used in the Hodson Light Box kit, supporting familiar classroom optics activities with a laser-based viewing method. The long straight and curved bars are used to demonstrate optical fibre principles and internal reflection. These pieces help students observe how light can travel through a transparent path and change direction inside a shaped medium. The kit supports teaching activities involving refraction, light bending, light path tracing, internal reflection, optical fibre behaviour and introductory photonics concepts.
Three supplied formats are available. The full set includes 8 parts, the part set includes 6 shaped pieces, and the bar-only set includes 2 bars for optical fibre and internal reflection demonstrations. This product is suitable for optics teaching, photonics demonstrations, laser light path observation and classroom experiments using approved laser safety procedures. Users should confirm the required kit format, laser source suitability, classroom safety method and supervision requirements before use. Laser light should only be used under appropriate teacher or laboratory supervisor control. This item is supplied as the selected Laser View Kit or part set only. Laser source, light box, optical bench, screens and any additional accessories are not included unless specified separately.
LabChoice Australia supplies Laser View Kits and Part Sets for school science laboratories, physics classrooms, optics teaching spaces and general education laboratories requiring practical apparatus for light path and photonics demonstrations.
Datasheets & Manuals
Document :
Product Information Sheet(Pdf)
Aluminium Pulleys, 50 mm Diameter, Single, Double and Triple
From AUD 9.90 (Ex GST)
Cylindrical Dropping Funnel with PTFE Stopcock, Open Top, BORO 3.3 Glass
From AUD 27.50 (Ex GST)
Bunsen Burner for Natural Gas & LPG, Adjustable Flame Laboratory Burner
From AUD 20.00 (Ex GST)
Double Hooked Weight Calibration Set, 10 g to 1000 g
AUD 124.50(Ex GST)
Flat Plate Electrodes with Terminals, 75 × 25 × 3 mm
From AUD 9.50 (Ex GST)
Biological Right Lung Model on Stand
AUD 124.50(Ex GST)
Superconductivity Kit, Complete Set
From AUD 18.90 (Ex GST)
Laboratory Dry Bath Incubator
AUD 976.50(Ex GST)
Simple Heating Mantles, Controlled Heating for Round Bottom Flasks
From AUD 311.50 (Ex GST)
Biological Foot Model, Normal
AUD 62.50(Ex GST)
You May Also Need
Bonded Compound Bar for Thermal Expansion
From AUD 9.90 (Ex GST)
Classic Mechanical Equivalent of Heat (J) Apparatus
AUD 530.90(Ex GST)
Conductometer Heat Conduction Apparatus
AUD 24.90(Ex GST)
Copper Calorimeter Cups, Nickel Plated, 50 × 75 mm and 75 × 100 mm
From AUD 26.50 (Ex GST)
Cylindrical Lenses, Plano Concave and Plano Convex Optics
From AUD 29.90 (Ex GST)
Flat Glass Plates Set of 6 for Interference Experiments
AUD 59.90(Ex GST)
Frosted Acrylic Projection Screen with Feet, 200 × 200 mm
AUD 33.90(Ex GST)
Hodson Light Box and Optical Set, 12 V
From AUD 190.50 (Ex GST)
Hot/Cold Thermopile on Heat Sink with Socket Terminals
AUD 123.50(Ex GST)
Immersion Heater, 12 V 50 W for Calorimeter Blocks
AUD 62.50(Ex GST)
Round Biconvex Lenses, Unmounted Diverging Lens Teaching Range
From AUD 3.50 (Ex GST)
Simple Copper–Constantan Thermocouple, 200 mm Length
AUD 9.90(Ex GST)
Spectrum Tube EHV Unit and Tube Support, Without Tubes
AUD 422.50(Ex GST)
Wooden V-Groove Lens and Mirror Holders, 50 mm and 75 mm
From AUD 6.90 (Ex GST)
[porto_related_products_slider]
FEATURED PRODUCTS
BEST SELLING PRODUCTS
Glass Petri Dishes with Lid, Autoclavable, Borosilicate Glass (BORO 3.3)
From AUD 3.90 (Ex GST)
Reagent Bottles, Wide Mouth, HDPE, Chemical-Resistant, Highly Reliable & Durable - Each
From AUD 1.50 (Ex GST)
Petri Dishes, Polypropylene, Autoclavable & Reusable, High Quality
From AUD 1.20 (Ex GST)
What Our Customers Say
⭐⭐⭐⭐⭐
We ordered a set of customised BORO 3.3 borosilicate glassware for our teaching labs, and LabChoice Australia exceeded every expectation. From the first consultation to final delivery, their team listened carefully, offered expert advice, and ensured every piece matched our specifications perfectly.
The clarity and precision of the glassware are exceptional, and the quick turnaround made setup effortless. It’s refreshing to work with an Australian supplier who genuinely understands laboratory needs and takes pride in quality craftsmanship. We’ll definitely be returning to LabChoice for future glassware requirements
⭐⭐⭐⭐⭐
Our lab required high-precision BORO 3.3 glassware for analytical testing, and LabChoice Australia delivered outstanding results. The ordering process was simple, communication was clear, and every beaker and flask arrived perfectly calibrated and ready for use.
The quality of the glass is exceptional — resistant to heat, easy to clean, and consistently accurate in measurement. It’s reassuring to know there’s an Australian supplier that combines scientific precision with genuine customer care. I’d recommend LabChoice to any research team looking for dependable labware
⭐⭐⭐⭐⭐
We needed a set of customised borosilicate glassware for a specialised project, and LabChoice Australia delivered exactly what we envisioned. The team worked closely with us from design to production, ensuring every detail met our specifications. The craftsmanship is exceptional, and the turnaround time was impressive. It’s reassuring to know we can rely on them for unique, made-to-order pieces
⭐⭐⭐⭐⭐
LabChoice Australia has completely changed the way we source our lab glassware. The quality is consistently top-notch, and every piece meets the precision we need for reliable results. Their team knows their stuff, answers our questions quickly, and always goes the extra mile to help — they’re more like partners than just a supplier.
⭐⭐⭐⭐⭐
We trust LabChoice Australia because they deliver every time. Their borosilicate glassware is durable, accurate, and perfect for the high-heat work we do. Everything arrives well-packed with clear specs, so there are never surprises. It’s reassuring to deal with a supplier who understands both compliance and the demands of a busy lab